From: Linus Walleij Date: Fri, 20 Dec 2024 23:59:27 +0000 (+0100) Subject: ixp4xx: Support single zcom_npe_esa hw address X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d15da125eb14858ff68c33c0dcdf5aaeb7d3a004;p=openwrt%2Fopenwrt.git ixp4xx: Support single zcom_npe_esa hw address Some ixp4xx platforms with a proper RedBoot config do not contain the per-ethernet interface npe_eth0_esa, but rather a single entry named zcom_npe_esa. Let's use this if fconfig can't find the primary key. This is needed on the Netgear WG302 v1. Signed-off-by: Linus Walleij --- diff --git a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx index 9e7ff46298..c58eb96f2a 100644 --- a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx +++ b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx @@ -5,8 +5,12 @@ set_from_redboot () { for npe in eth0 eth1 eth2 do + mac="$(fconfig -s -r -d /dev/$1 -n npe_"$npe"_esa)" + if [ -z $mac ] ; then + mac="$(fconfig -s -r -d /dev/$1 -n zcom_npe_esa)" + fi if ip link show dev $npe > /dev/null 2>&1; then - ip link set dev $npe address $(fconfig -s -r -d /dev/$1 -n npe_"$npe"_esa) + ip link set dev $npe address $mac fi done