From: Jon Hunter Date: Tue, 5 Jun 2012 17:34:52 +0000 (-0500) Subject: ARM: OMAP: Add DMTIMER capability variable to represent timer features X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d1c1691be5290bf7e5b11b63b6fda0d63a9f4937;p=openwrt%2Fstaging%2Fblogic.git ARM: OMAP: Add DMTIMER capability variable to represent timer features Although the OMAP timers share a common hardware design, there are some differences between the timer instances in a given device. For example, a timer maybe in a power domain that can be powered-of, so can lose its logic state and need restoring where as another may be in power domain that is always be on. Another example, is a timer may support different clock sources to drive the timer. This information is passed to the dmtimer via the following platform data structure. struct dmtimer_platform_data { int (*set_timer_src)(struct platform_device *pdev, int source); int timer_ip_version; u32 needs_manual_reset:1; bool loses_context; int (*get_context_loss_count)(struct device *dev); }; The above structure uses multiple variables to represent the timer features. HWMOD also stores the timer capabilities using a bit-mask that represents the features supported. By using the same format for representing the timer features in the platform data as used by HWMOD, we can ... 1. Use the flags defined in the plat/dmtimer.h to represent the features supported. 2. For devices using HWMOD, we can retrieve the features supported from HWMOD. 3. Eventually, simplify the platform data structure to be ... struct dmtimer_platform_data { int (*set_timer_src)(struct platform_device *pdev, int source); u32 timer_capability; } Another benefit from doing this, is that it will simplify the migration of the dmtimer driver to device-tree. For example, in the current OMAP2+ timer code the "loses_context" variable is configured at runtime by calling an architecture specific function. For device tree this creates a problem, because we would need to call the architecture specific function from within the dmtimer driver. However, such attributes do not need to be queried at runtime and we can look up the attributes via HWMOD or device-tree. This changes a new "capability" variable to the platform data and timer structure so we can start removing and simplifying the platform data structure. Signed-off-by: Jon Hunter Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b0b208077c96..d8a5dc3d695f 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -500,6 +500,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) pdata->set_timer_src = omap2_dm_timer_set_src; pdata->timer_ip_version = oh->class->rev; + if (timer_dev_attr) + pdata->timer_capability = timer_dev_attr->timer_capability; + pwrdm = omap_hwmod_get_pwrdm(oh); pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); #ifdef CONFIG_PM diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index f5b5c89ac7c2..30742d8e6819 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -694,6 +694,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) timer->pdev = pdev; timer->loses_context = pdata->loses_context; timer->get_context_loss_count = pdata->get_context_loss_count; + timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ if (!pdata->needs_manual_reset) { diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 1e5ce5d56240..48e54caf9001 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -101,6 +101,7 @@ struct dmtimer_platform_data { bool loses_context; int (*get_context_loss_count)(struct device *dev); + u32 timer_capability; }; int omap_dm_timer_reserve_systimer(int id); @@ -273,6 +274,7 @@ struct omap_dm_timer { bool loses_context; int ctx_loss_count; int revision; + u32 capability; struct platform_device *pdev; struct list_head node;