From: Jiri Pirko Date: Thu, 3 Dec 2015 11:12:25 +0000 (+0100) Subject: mlxsw: reg: Add link aggregation configuration registers definitions X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d1d40be084c60f2ba2ca369dedd27b12ae840aa1;p=openwrt%2Fstaging%2Fblogic.git mlxsw: reg: Add link aggregation configuration registers definitions Add definitions of SLDR, SLCR2, SLCOR registers that are used to configure LAG. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index f89419393a7f..049abbb8bcc2 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -865,6 +865,293 @@ static inline void mlxsw_reg_sftr_pack(char *payload, mlxsw_reg_sftr_port_mask_set(payload, port, 1); } +/* SLDR - Switch LAG Descriptor Register + * ----------------------------------------- + * The switch LAG descriptor register is populated by LAG descriptors. + * Each LAG descriptor is indexed by lag_id. The LAG ID runs from 0 to + * max_lag-1. + */ +#define MLXSW_REG_SLDR_ID 0x2014 +#define MLXSW_REG_SLDR_LEN 0x0C /* counting in only one port in list */ + +static const struct mlxsw_reg_info mlxsw_reg_sldr = { + .id = MLXSW_REG_SLDR_ID, + .len = MLXSW_REG_SLDR_LEN, +}; + +enum mlxsw_reg_sldr_op { + /* Indicates a creation of a new LAG-ID, lag_id must be valid */ + MLXSW_REG_SLDR_OP_LAG_CREATE, + MLXSW_REG_SLDR_OP_LAG_DESTROY, + /* Ports that appear in the list have the Distributor enabled */ + MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST, + /* Removes ports from the disributor list */ + MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST, +}; + +/* reg_sldr_op + * Operation. + * Access: RW + */ +MLXSW_ITEM32(reg, sldr, op, 0x00, 29, 3); + +/* reg_sldr_lag_id + * LAG identifier. The lag_id is the index into the LAG descriptor table. + * Access: Index + */ +MLXSW_ITEM32(reg, sldr, lag_id, 0x00, 0, 10); + +static inline void mlxsw_reg_sldr_lag_create_pack(char *payload, u8 lag_id) +{ + MLXSW_REG_ZERO(sldr, payload); + mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_CREATE); + mlxsw_reg_sldr_lag_id_set(payload, lag_id); +} + +static inline void mlxsw_reg_sldr_lag_destroy_pack(char *payload, u8 lag_id) +{ + MLXSW_REG_ZERO(sldr, payload); + mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_DESTROY); + mlxsw_reg_sldr_lag_id_set(payload, lag_id); +} + +/* reg_sldr_num_ports + * The number of member ports of the LAG. + * Reserved for Create / Destroy operations + * For Add / Remove operations - indicates the number of ports in the list. + * Access: RW + */ +MLXSW_ITEM32(reg, sldr, num_ports, 0x04, 24, 8); + +/* reg_sldr_system_port + * System port. + * Access: RW + */ +MLXSW_ITEM32_INDEXED(reg, sldr, system_port, 0x08, 0, 16, 4, 0, false); + +static inline void mlxsw_reg_sldr_lag_add_port_pack(char *payload, u8 lag_id, + u8 local_port) +{ + MLXSW_REG_ZERO(sldr, payload); + mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST); + mlxsw_reg_sldr_lag_id_set(payload, lag_id); + mlxsw_reg_sldr_num_ports_set(payload, 1); + mlxsw_reg_sldr_system_port_set(payload, 0, local_port); +} + +static inline void mlxsw_reg_sldr_lag_remove_port_pack(char *payload, u8 lag_id, + u8 local_port) +{ + MLXSW_REG_ZERO(sldr, payload); + mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST); + mlxsw_reg_sldr_lag_id_set(payload, lag_id); + mlxsw_reg_sldr_num_ports_set(payload, 1); + mlxsw_reg_sldr_system_port_set(payload, 0, local_port); +} + +/* SLCR - Switch LAG Configuration 2 Register + * ------------------------------------------- + * The Switch LAG Configuration register is used for configuring the + * LAG properties of the switch. + */ +#define MLXSW_REG_SLCR_ID 0x2015 +#define MLXSW_REG_SLCR_LEN 0x10 + +static const struct mlxsw_reg_info mlxsw_reg_slcr = { + .id = MLXSW_REG_SLCR_ID, + .len = MLXSW_REG_SLCR_LEN, +}; + +enum mlxsw_reg_slcr_pp { + /* Global Configuration (for all ports) */ + MLXSW_REG_SLCR_PP_GLOBAL, + /* Per port configuration, based on local_port field */ + MLXSW_REG_SLCR_PP_PER_PORT, +}; + +/* reg_slcr_pp + * Per Port Configuration + * Note: Reading at Global mode results in reading port 1 configuration. + * Access: Index + */ +MLXSW_ITEM32(reg, slcr, pp, 0x00, 24, 1); + +/* reg_slcr_local_port + * Local port number + * Supported from CPU port + * Not supported from router port + * Reserved when pp = Global Configuration + * Access: Index + */ +MLXSW_ITEM32(reg, slcr, local_port, 0x00, 16, 8); + +enum mlxsw_reg_slcr_type { + MLXSW_REG_SLCR_TYPE_CRC, /* default */ + MLXSW_REG_SLCR_TYPE_XOR, + MLXSW_REG_SLCR_TYPE_RANDOM, +}; + +/* reg_slcr_type + * Hash type + * Access: RW + */ +MLXSW_ITEM32(reg, slcr, type, 0x00, 0, 4); + +/* Ingress port */ +#define MLXSW_REG_SLCR_LAG_HASH_IN_PORT BIT(0) +/* SMAC - for IPv4 and IPv6 packets */ +#define MLXSW_REG_SLCR_LAG_HASH_SMAC_IP BIT(1) +/* SMAC - for non-IP packets */ +#define MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP BIT(2) +#define MLXSW_REG_SLCR_LAG_HASH_SMAC \ + (MLXSW_REG_SLCR_LAG_HASH_SMAC_IP | \ + MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP) +/* DMAC - for IPv4 and IPv6 packets */ +#define MLXSW_REG_SLCR_LAG_HASH_DMAC_IP BIT(3) +/* DMAC - for non-IP packets */ +#define MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP BIT(4) +#define MLXSW_REG_SLCR_LAG_HASH_DMAC \ + (MLXSW_REG_SLCR_LAG_HASH_DMAC_IP | \ + MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP) +/* Ethertype - for IPv4 and IPv6 packets */ +#define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP BIT(5) +/* Ethertype - for non-IP packets */ +#define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP BIT(6) +#define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE \ + (MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP | \ + MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP) +/* VLAN ID - for IPv4 and IPv6 packets */ +#define MLXSW_REG_SLCR_LAG_HASH_VLANID_IP BIT(7) +/* VLAN ID - for non-IP packets */ +#define MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP BIT(8) +#define MLXSW_REG_SLCR_LAG_HASH_VLANID \ + (MLXSW_REG_SLCR_LAG_HASH_VLANID_IP | \ + MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP) +/* Source IP address (can be IPv4 or IPv6) */ +#define MLXSW_REG_SLCR_LAG_HASH_SIP BIT(9) +/* Destination IP address (can be IPv4 or IPv6) */ +#define MLXSW_REG_SLCR_LAG_HASH_DIP BIT(10) +/* TCP/UDP source port */ +#define MLXSW_REG_SLCR_LAG_HASH_SPORT BIT(11) +/* TCP/UDP destination port*/ +#define MLXSW_REG_SLCR_LAG_HASH_DPORT BIT(12) +/* IPv4 Protocol/IPv6 Next Header */ +#define MLXSW_REG_SLCR_LAG_HASH_IPPROTO BIT(13) +/* IPv6 Flow label */ +#define MLXSW_REG_SLCR_LAG_HASH_FLOWLABEL BIT(14) +/* SID - FCoE source ID */ +#define MLXSW_REG_SLCR_LAG_HASH_FCOE_SID BIT(15) +/* DID - FCoE destination ID */ +#define MLXSW_REG_SLCR_LAG_HASH_FCOE_DID BIT(16) +/* OXID - FCoE originator exchange ID */ +#define MLXSW_REG_SLCR_LAG_HASH_FCOE_OXID BIT(17) +/* Destination QP number - for RoCE packets */ +#define MLXSW_REG_SLCR_LAG_HASH_ROCE_DQP BIT(19) + +/* reg_slcr_lag_hash + * LAG hashing configuration. This is a bitmask, in which each set + * bit includes the corresponding item in the LAG hash calculation. + * The default lag_hash contains SMAC, DMAC, VLANID and + * Ethertype (for all packet types). + * Access: RW + */ +MLXSW_ITEM32(reg, slcr, lag_hash, 0x04, 0, 20); + +static inline void mlxsw_reg_slcr_pack(char *payload, u16 lag_hash) +{ + MLXSW_REG_ZERO(slcr, payload); + mlxsw_reg_slcr_pp_set(payload, MLXSW_REG_SLCR_PP_GLOBAL); + mlxsw_reg_slcr_type_set(payload, MLXSW_REG_SLCR_TYPE_XOR); + mlxsw_reg_slcr_lag_hash_set(payload, lag_hash); +} + +/* SLCOR - Switch LAG Collector Register + * ------------------------------------- + * The Switch LAG Collector register controls the Local Port membership + * in a LAG and enablement of the collector. + */ +#define MLXSW_REG_SLCOR_ID 0x2016 +#define MLXSW_REG_SLCOR_LEN 0x10 + +static const struct mlxsw_reg_info mlxsw_reg_slcor = { + .id = MLXSW_REG_SLCOR_ID, + .len = MLXSW_REG_SLCOR_LEN, +}; + +enum mlxsw_reg_slcor_col { + /* Port is added with collector disabled */ + MLXSW_REG_SLCOR_COL_LAG_ADD_PORT, + MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED, + MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_DISABLED, + MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT, +}; + +/* reg_slcor_col + * Collector configuration + * Access: RW + */ +MLXSW_ITEM32(reg, slcor, col, 0x00, 30, 2); + +/* reg_slcor_local_port + * Local port number + * Not supported for CPU port + * Access: Index + */ +MLXSW_ITEM32(reg, slcor, local_port, 0x00, 16, 8); + +/* reg_slcor_lag_id + * LAG Identifier. Index into the LAG descriptor table. + * Access: Index + */ +MLXSW_ITEM32(reg, slcor, lag_id, 0x00, 0, 10); + +/* reg_slcor_port_index + * Port index in the LAG list. Only valid on Add Port to LAG col. + * Valid range is from 0 to cap_max_lag_members-1 + * Access: RW + */ +MLXSW_ITEM32(reg, slcor, port_index, 0x04, 0, 10); + +static inline void mlxsw_reg_slcor_pack(char *payload, + u8 local_port, u16 lag_id, + enum mlxsw_reg_slcor_col col) +{ + MLXSW_REG_ZERO(slcor, payload); + mlxsw_reg_slcor_col_set(payload, col); + mlxsw_reg_slcor_local_port_set(payload, local_port); + mlxsw_reg_slcor_lag_id_set(payload, lag_id); +} + +static inline void mlxsw_reg_slcor_port_add_pack(char *payload, + u8 local_port, u16 lag_id, + u8 port_index) +{ + mlxsw_reg_slcor_pack(payload, local_port, lag_id, + MLXSW_REG_SLCOR_COL_LAG_ADD_PORT); + mlxsw_reg_slcor_port_index_set(payload, port_index); +} + +static inline void mlxsw_reg_slcor_port_remove_pack(char *payload, + u8 local_port, u16 lag_id) +{ + mlxsw_reg_slcor_pack(payload, local_port, lag_id, + MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT); +} + +static inline void mlxsw_reg_slcor_col_enable_pack(char *payload, + u8 local_port, u16 lag_id) +{ + mlxsw_reg_slcor_pack(payload, local_port, lag_id, + MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED); +} + +static inline void mlxsw_reg_slcor_col_disable_pack(char *payload, + u8 local_port, u16 lag_id) +{ + mlxsw_reg_slcor_pack(payload, local_port, lag_id, + MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED); +} + /* SPMLR - Switch Port MAC Learning Register * ----------------------------------------- * Controls the Switch MAC learning policy per port. @@ -2653,6 +2940,12 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "SFGC"; case MLXSW_REG_SFTR_ID: return "SFTR"; + case MLXSW_REG_SLDR_ID: + return "SLDR"; + case MLXSW_REG_SLCR_ID: + return "SLCR"; + case MLXSW_REG_SLCOR_ID: + return "SLCOR"; case MLXSW_REG_SPMLR_ID: return "SPMLR"; case MLXSW_REG_SVFA_ID: