From: Deng Qingfang Date: Thu, 9 Aug 2018 17:22:46 +0000 (+0800) Subject: ramips: add support for HiWiFi HC5861B X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d20f4fc628e9e3c1e1d4063a0798e4097ffb3c4a;p=openwrt%2Fstaging%2Fblocktrron.git ramips: add support for HiWiFi HC5861B HiWiFi "Gee Enjoy1200" HC5861B is a dual-band router based on MediaTek MT7628AN https://www.hiwifi.com/enjoy-view Specifications: - MediaTek MT7628AN 580MHz - 128 MB DDR2 RAM - 16 MB SPI Flash - 2.4G MT7628AN 802.11bgn 2T2R 300Mbps - 5G MT7612EN 802.11ac 2T2R 867Mbps - 5x 10/100 Mbps Ethernet Flash instruction: 1. Get SSH access to the router 2. SSH to router with `ssh -p 1022 root@192.168.199.1`, The SSH password is the same as the webconfig one 3. Upload OpenWrt sysupgrade firmware into the router's `/tmp` folder with SCP 4. Run `mtd write /tmp/ firmware` 5. reboot Everything is working Signed-off-by: Deng Qingfang --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index b64e9d14c5..4e90efd4e6 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -240,6 +240,9 @@ hg255d) set_usb_led "$boardname:green:usb" ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2" ;; +hiwifi,hc5861b) + set_wifi_led "$boardname:green:wlan2g" + ;; hpm) ucidef_set_led_default "power" "POWER" "$boardname:orange:power" "1" ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 3ae01448b5..915c3584c5 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -199,6 +199,7 @@ ramips_setup_interfaces() gl-mt300n|\ gl-mt750|\ hg255d|\ + hiwifi,hc5861b|\ jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ @@ -483,7 +484,8 @@ ramips_setup_macs() ;; hc5*61|\ hc5661a|\ - hc5962) + hc5962|\ + hiwifi,hc5861b) lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "` [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a46925a43b..a102a0bf7a 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -73,6 +73,7 @@ platform_check_image() { hc5*61|\ hc5661a|\ hg255d|\ + hiwifi,hc5861b|\ hlk-rm04|\ hpm|\ ht-tm02|\ diff --git a/target/linux/ramips/dts/HC5861B.dts b/target/linux/ramips/dts/HC5861B.dts new file mode 100644 index 0000000000..e4a4cce816 --- /dev/null +++ b/target/linux/ramips/dts/HC5861B.dts @@ -0,0 +1,141 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "hiwifi,hc5861b", "mediatek,mt7628an-soc"; + model = "HiWiFi HC5861B"; + + aliases { + led-status = &led_system; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_system: system { + label = "hc5861b:green:system"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + wlan2g { + label = "hc5861b:green:wlan2g"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "refclk", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "hw_panic"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf70000>; + }; + + partition@fc0000 { + label = "oem"; + reg = <0xfc0000 0x20000>; + read-only; + }; + + bdinfo: partition@fe0000 { + label = "bdinfo"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "backup"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&wmac { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + mtd-mac-address = <&factory 0x2e>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index eddbbea3c2..0c657d5a0f 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -69,6 +69,13 @@ define Device/hc5661a endef TARGET_DEVICES += hc5661a +define Device/hiwifi_hc5861b + DTS := HC5861B + IMAGE_SIZE := 15808k + DEVICE_TITLE := HiWiFi HC5861B +endef +TARGET_DEVICES += hiwifi_hc5861b + define Device/LinkIt7688 DTS := LINKIT7688 IMAGE_SIZE := $(ralink_default_fw_size_32M)