From: Mahesh Bandewar Date: Sat, 9 May 2015 07:01:57 +0000 (-0700) Subject: bonding: Implement user key part of port_key in an AD system. X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d22a5fc0c32edcf5c3bb973ee8c9a2606ba500a8;p=openwrt%2Fstaging%2Fblogic.git bonding: Implement user key part of port_key in an AD system. The port key has three components - user-key, speed-part, and duplex-part. The LSBit is for the duplex-part, next 5 bits are for the speed while the remaining 10 bits are the user defined key bits. Get these 10 bits from the user-space (through the SysFs interface) and use it to form the admin port-key. Allowed range for the user-key is 0 - 1023 (10 bits). If it is not provided then use zero for the user-key-bits (default). It can set using following example code - # modprobe bonding mode=4 # usr_port_key=$(( RANDOM & 0x3FF )) # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar Reviewed-by: Nikolay Aleksandrov [jt: * fixed up style issues reported by checkpatch * fixed up context from change in ad_actor_sys_prio patch] Signed-off-by: Jonathan Toppins Signed-off-by: David S. Miller --- diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 2c197b68baf0..334b49ef02d1 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -51,6 +51,7 @@ Table of Contents 3.4 Configuring Bonding Manually via Sysfs 3.5 Configuration with Interfaces Support 3.6 Overriding Configuration for Special Cases +3.7 Configuring LACP for 802.3ad mode in a more secure way 4. Querying Bonding Configuration 4.1 Bonding Configuration @@ -241,6 +242,21 @@ ad_select This option was added in bonding version 3.4.0. +ad_user_port_key + + In an AD system, the port-key has three parts as shown below - + + Bits Use + 00 Duplex + 01-05 Speed + 06-15 User-defined + + This defines the upper 10 bits of the port key. The values can be + from 0 - 1023. If not given, the system defaults to 0. + + This parameter has effect only in 802.3ad mode and is available through + SysFs interface. + all_slaves_active Specifies that duplicate frames (received on inactive ports) should be @@ -1643,6 +1659,53 @@ output port selection. This feature first appeared in bonding driver version 3.7.0 and support for output slave selection was limited to round-robin and active-backup modes. +3.7 Configuring LACP for 802.3ad mode in a more secure way +---------------------------------------------------------- + +When using 802.3ad bonding mode, the Actor (host) and Partner (switch) +exchange LACPDUs. These LACPDUs cannot be sniffed, because they are +destined to link local mac addresses (which switches/bridges are not +supposed to forward). However, most of the values are easily predictable +or are simply the machine's MAC address (which is trivially known to all +other hosts in the same L2). This implies that other machines in the L2 +domain can spoof LACPDU packets from other hosts to the switch and potentially +cause mayhem by joining (from the point of view of the switch) another +machine's aggregate, thus receiving a portion of that hosts incoming +traffic and / or spoofing traffic from that machine themselves (potentially +even successfully terminating some portion of flows). Though this is not +a likely scenario, one could avoid this possibility by simply configuring +few bonding parameters: + + (a) ad_actor_system : You can set a random mac-address that can be used for + these LACPDU exchanges. The value can not be either NULL or Multicast. + Also it's preferable to set the local-admin bit. Following shell code + generates a random mac-address as described above. + + # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ + $(( (RANDOM & 0xFE) | 0x02 )) \ + $(( RANDOM & 0xFF )) \ + $(( RANDOM & 0xFF )) \ + $(( RANDOM & 0xFF )) \ + $(( RANDOM & 0xFF )) \ + $(( RANDOM & 0xFF ))) + # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system + + (b) ad_actor_sys_prio : Randomize the system priority. The default value + is 65535, but system can take the value from 1 - 65535. Following shell + code generates random priority and sets it. + + # sys_prio=$(( 1 + RANDOM + RANDOM )) + # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio + + (c) ad_user_port_key : Use the user portion of the port-key. The default + keeps this empty. These are the upper 10 bits of the port-key and value + ranges from 0 - 1023. Following shell code generates these 10 bits and + sets it. + + # usr_port_key=$(( RANDOM & 0x3FF )) + # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key + + 4 Querying Bonding Configuration ================================= diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 012f7bc22d91..7fde4d5c2b28 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -75,10 +75,10 @@ /* Port Key definitions * key is determined according to the link speed, duplex and * user key (which is yet not supported) - * -------------------------------------------------------------- - * Port key : | User key | Speed | Duplex | - * -------------------------------------------------------------- - * 16 6 1 0 + * -------------------------------------------------------------- + * Port key | User key (10 bits) | Speed (5 bits) | Duplex| + * -------------------------------------------------------------- + * |15 6|5 1|0 */ #define AD_DUPLEX_KEY_MASKS 0x1 #define AD_SPEED_KEY_MASKS 0x3E @@ -1951,10 +1951,10 @@ void bond_3ad_bind_slave(struct slave *slave) port->slave = slave; port->actor_port_number = SLAVE_AD_INFO(slave)->id; - /* key is determined according to the link speed, duplex and user key(which - * is yet not supported) + /* key is determined according to the link speed, duplex and + * user key */ - port->actor_admin_port_key = 0; + port->actor_admin_port_key = bond->params.ad_user_port_key << 6; port->actor_admin_port_key |= __get_duplex(port); port->actor_admin_port_key |= (__get_link_speed(port) << 1); port->actor_oper_port_key = port->actor_admin_port_key; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a4e2f27ef683..2ee13be7551b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4141,6 +4141,7 @@ static int bond_check_params(struct bond_params *params) const struct bond_opt_value *valptr; int arp_all_targets_value; u16 ad_actor_sys_prio = 0; + u16 ad_user_port_key = 0; /* Convert string parameters. */ if (mode) { @@ -4445,6 +4446,14 @@ static int bond_check_params(struct bond_params *params) } ad_actor_sys_prio = valptr->value; + valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY), + &newval); + if (!valptr) { + pr_err("Error: No ad_user_port_key default value"); + return -EINVAL; + } + ad_user_port_key = valptr->value; + if (lp_interval == 0) { pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n", INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL); @@ -4475,6 +4484,7 @@ static int bond_check_params(struct bond_params *params) params->tlb_dynamic_lb = 1; /* Default value */ params->ad_actor_sys_prio = ad_actor_sys_prio; eth_zero_addr(params->ad_actor_system); + params->ad_user_port_key = ad_user_port_key; if (packets_per_slave > 0) { params->reciprocal_packets_per_slave = reciprocal_value(packets_per_slave); diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index cdcef217ac84..c85da05721e6 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -74,6 +74,8 @@ static int bond_option_ad_actor_sys_prio_set(struct bonding *bond, const struct bond_opt_value *newval); static int bond_option_ad_actor_system_set(struct bonding *bond, const struct bond_opt_value *newval); +static int bond_option_ad_user_port_key_set(struct bonding *bond, + const struct bond_opt_value *newval); static const struct bond_opt_value bond_mode_tbl[] = { @@ -196,6 +198,12 @@ static const struct bond_opt_value bond_ad_actor_sys_prio_tbl[] = { { NULL, -1, 0}, }; +static const struct bond_opt_value bond_ad_user_port_key_tbl[] = { + { "minval", 0, BOND_VALFLAG_MIN | BOND_VALFLAG_DEFAULT}, + { "maxval", 1023, BOND_VALFLAG_MAX}, + { NULL, -1, 0}, +}; + static const struct bond_option bond_opts[BOND_OPT_LAST] = { [BOND_OPT_MODE] = { .id = BOND_OPT_MODE, @@ -405,6 +413,14 @@ static const struct bond_option bond_opts[BOND_OPT_LAST] = { .flags = BOND_OPTFLAG_RAWVAL | BOND_OPTFLAG_IFDOWN, .set = bond_option_ad_actor_system_set, }, + [BOND_OPT_AD_USER_PORT_KEY] = { + .id = BOND_OPT_AD_USER_PORT_KEY, + .name = "ad_user_port_key", + .unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)), + .flags = BOND_OPTFLAG_IFDOWN, + .values = bond_ad_user_port_key_tbl, + .set = bond_option_ad_user_port_key_set, + } }; /* Searches for an option by name */ @@ -1402,3 +1418,13 @@ static int bond_option_ad_actor_system_set(struct bonding *bond, ether_addr_copy(bond->params.ad_actor_system, macaddr); return 0; } + +static int bond_option_ad_user_port_key_set(struct bonding *bond, + const struct bond_opt_value *newval) +{ + netdev_info(bond->dev, "Setting ad_user_port_key to (%llu)\n", + newval->value); + + bond->params.ad_user_port_key = newval->value; + return 0; +} diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 09fefa50d055..143a2abd1c1c 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -721,6 +721,20 @@ static ssize_t bonding_show_ad_actor_system(struct device *d, static DEVICE_ATTR(ad_actor_system, S_IRUGO | S_IWUSR, bonding_show_ad_actor_system, bonding_sysfs_store_option); +static ssize_t bonding_show_ad_user_port_key(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct bonding *bond = to_bond(d); + + if (BOND_MODE(bond) == BOND_MODE_8023AD) + return sprintf(buf, "%hu\n", bond->params.ad_user_port_key); + + return 0; +} +static DEVICE_ATTR(ad_user_port_key, S_IRUGO | S_IWUSR, + bonding_show_ad_user_port_key, bonding_sysfs_store_option); + static struct attribute *per_bond_attrs[] = { &dev_attr_slaves.attr, &dev_attr_mode.attr, @@ -756,6 +770,7 @@ static struct attribute *per_bond_attrs[] = { &dev_attr_tlb_dynamic_lb.attr, &dev_attr_ad_actor_sys_prio.attr, &dev_attr_ad_actor_system.attr, + &dev_attr_ad_user_port_key.attr, NULL, }; diff --git a/include/net/bond_options.h b/include/net/bond_options.h index eeeefa1d3cd8..c28aca25320e 100644 --- a/include/net/bond_options.h +++ b/include/net/bond_options.h @@ -65,6 +65,7 @@ enum { BOND_OPT_TLB_DYNAMIC_LB, BOND_OPT_AD_ACTOR_SYS_PRIO, BOND_OPT_AD_ACTOR_SYSTEM, + BOND_OPT_AD_USER_PORT_KEY, BOND_OPT_LAST }; diff --git a/include/net/bonding.h b/include/net/bonding.h index 650f38693956..20defc0353d1 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -137,6 +137,7 @@ struct bond_params { int tlb_dynamic_lb; struct reciprocal_value reciprocal_packets_per_slave; u16 ad_actor_sys_prio; + u16 ad_user_port_key; u8 ad_actor_system[ETH_ALEN]; };