From: Mathias Kresin <dev@kresin.me> Date: Tue, 13 Mar 2018 19:06:37 +0000 (+0100) Subject: ramips: mt7620n: add mdio node and disable port4 by default X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d482356322c9910541a3118d049718b384a252bd;p=openwrt%2Fstaging%2Fdedeckeh.git ramips: mt7620n: add mdio node and disable port4 by default Revert the changes I applied to aa5014dd1a58 ("ramips: mt7620n: enable port 4 as EPHY by default"). The driver expects a node mdio-bus to be present, regardless of the actual node status. If the node is missing the driver fails to load with mtk_soc_eth 10100000.ethernet: no mdio-bus child node found Disable port4 by default again. If the port is enabled but not present, a "invalid port id 4" warning is shown during boot. Fixes: FS#1428 Signed-off-by: Mathias Kresin <dev@kresin.me> --- diff --git a/target/linux/ramips/dts/mt7620n.dtsi b/target/linux/ramips/dts/mt7620n.dtsi index 26c7d91e33..ebaa094600 100644 --- a/target/linux/ramips/dts/mt7620n.dtsi +++ b/target/linux/ramips/dts/mt7620n.dtsi @@ -293,11 +293,18 @@ mediatek,switch = <&gsw>; + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + port@4 { compatible = "mediatek,mt7620a-gsw-port", "mediatek,eth-port"; reg = <4>; - status = "okay"; + status = "disabled"; }; };