From: Mark Brown Date: Thu, 17 Apr 2008 13:24:39 +0000 (-0400) Subject: Input: wm97xx-core - only schedule interrupt handler if not already scheduled X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d808fbe5b404854374917bd0d1db937a0a524665;p=openwrt%2Fstaging%2Fblogic.git Input: wm97xx-core - only schedule interrupt handler if not already scheduled As well as clarifying the fact that the driver can cope if a second interrupt occurs before the IRQ work is scheduled this also ensures that calls to the machine irq_enable() are balanced, making that easier to implement. Normally this is redundant due to the interrupt disabling but some unusal board configurations can trigger it. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 2910999e05a0..e27b1e060b33 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -328,18 +328,18 @@ static void wm97xx_pen_irq_worker(struct work_struct *work) * * We have to disable the codec interrupt in the handler because it * can take upto 1ms to clear the interrupt source. We schedule a task - * in a work queue to do the actual interaction with the chip (it - * doesn't matter if we end up reenqueing it before it is executed - * since we don't touch the chip until it has run). The interrupt is - * then enabled again in the slow handler when the source has been - * cleared. + * in a work queue to do the actual interaction with the chip. The + * interrupt is then enabled again in the slow handler when the source + * has been cleared. */ static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) { struct wm97xx *wm = dev_id; - wm->mach_ops->irq_enable(wm, 0); - queue_work(wm->ts_workq, &wm->pen_event_work); + if (!work_pending(&wm->pen_event_work)) { + wm->mach_ops->irq_enable(wm, 0); + queue_work(wm->ts_workq, &wm->pen_event_work); + } return IRQ_HANDLED; }