From: Andrew Cameron Date: Thu, 18 Jun 2020 13:25:43 +0000 (-0500) Subject: ath79: add support for TP-Link CPE610 v2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d93da0d0169b2ca90b888e4bb782c259e5ddf2fe;p=openwrt%2Fstaging%2Flinusw.git ath79: add support for TP-Link CPE610 v2 TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector - Power, LAN, WLAN5G green LEDs - 3x green RSSI LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron --- diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts new file mode 100644 index 0000000000..c00f21a51e --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tplink_cpe.dtsi" + +/ { + model = "TP-Link CPE610 v2"; + compatible = "tplink,cpe610-v2", "qca,ar9344"; + + aliases { + led-boot = &led_lan; + led-failsafe = &led_lan; + led-upgrade = &led_lan; + }; + + leds { + compatible = "gpio-leds"; + + led_lan: lan { + label = "tp-link:green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +ð1 { + compatible = "syscon", "simple-mfd"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 8029cf7b5e..be0c3b1217 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -243,6 +243,9 @@ tplink,cpe510-v3) ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" ;; tplink,cpe610-v1|\ +tplink,cpe610-v2) + ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" + ;; tplink,tl-wr902ac-v1) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f2ba49764b..02245031fa 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -39,6 +39,7 @@ ath79_setup_interfaces() tplink,cpe510-v2|\ tplink,cpe510-v3|\ tplink,cpe610-v1|\ + tplink,cpe610-v2|\ tplink,re350k-v1|\ tplink,re355-v1|\ tplink,re450-v1|\ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index bd7eb3fc76..967eb2a7c3 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -352,6 +352,16 @@ define Device/tplink_cpe610-v1 endef TARGET_DEVICES += tplink_cpe610-v1 +define Device/tplink_cpe610-v2 + $(Device/tplink-safeloader-okli) + SOC := ar9344 + IMAGE_SIZE := 7680k + DEVICE_MODEL := CPE610 + DEVICE_VARIANT := v2 + TPLINK_BOARD_ID := CPE610V2 +endef +TARGET_DEVICES += tplink_cpe610-v2 + define Device/tplink_re350k-v1 $(Device/tplink-safeloader) SOC := qca9558 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index f0e777124c..f2e4a7ce9a 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -474,6 +474,46 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "support-list", }, + /** Firmware layout for the CPE610V2 */ + { + .id = "CPE610V2", + .vendor = "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n", + .support_list = + "SupportList:\r\n" + "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n" + "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n" + "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n" + "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5):2.0\r\n" + "CPE610(TP-LINK|EU|N300-5):2.0\r\n" + "CPE610(TP-LINK|US|N300-5):2.0\r\n", + .support_trail = '\xff', + .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"partition-table", 0x20000, 0x02000}, + {"default-mac", 0x30000, 0x00020}, + {"product-info", 0x31100, 0x00100}, + {"signature", 0x32000, 0x00400}, + {"os-image", 0x40000, 0x200000}, + {"file-system", 0x240000, 0x570000}, + {"soft-version", 0x7b0000, 0x00100}, + {"support-list", 0x7b1000, 0x00400}, + {"user-config", 0x7c0000, 0x10000}, + {"default-config", 0x7d0000, 0x10000}, + {"log", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "support-list", + }, + { .id = "WBS210", .vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n",