From: Florian Fainelli Date: Fri, 14 Feb 2014 23:21:42 +0000 (-0800) Subject: Documentation: broadcom-bcmgenet: add better clocks documentation X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d94b27c8b65c22c92350629e04266a41774c1fe2;p=openwrt%2Fstaging%2Fblogic.git Documentation: broadcom-bcmgenet: add better clocks documentation Document the required "clocks" phandles and their corresponding "clock-names" properties for the two clocks used by the GENET hardware block ("enet" and "enet-wol"). CC: Mark Rutland Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt index afd31f97b00c..88c3d0478f7d 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt @@ -14,8 +14,11 @@ Required properties: - size-cells: should be 1 Optional properties: -- clocks: When provided, must be two cells, first one is the main GENET clock - and the second cell is the Genet Wake-on-LAN clock. +- clocks: When provided, must be two phandles to the functional clocks nodes + of the GENET block. The first phandle is the main GENET clock used during + normal operation, while the second phandle is the Wake-on-LAN clock. +- clock-names: When provided, names of the functional clock phandles, first + name should be "enet" and second should be "enet-wol". - phy-handle: A phandle to a phy node defining the PHY address (as the reg property, a single integer), used to describe configurations where a PHY