From: Tomasz Maciej Nowak Date: Mon, 23 Jan 2023 13:44:15 +0000 (+0100) Subject: x86: add Barracuda Networks F12 interfaces X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d9a1eee764aa8a800e2094d614bbe8e1b248b8c3;p=openwrt%2Fstaging%2Fdedeckeh.git x86: add Barracuda Networks F12 interfaces Match interface numbers with printed numbers on device enclosure and assign first port as WAN interface. Notes Serial console is available through RJ-45 port with Cisco pinout baud: 19200, parity: none, flow control: none The device is setup with UEFI. To enter setup hold DEL or ESC key on boot. Default UEFI Administrator password is: bcndk1 For users using graphics IC it's advisable to disable display with: i915.disable_display=1 appending to kernel command line inside bootloader, to save about 0.5-0.6W energy on idle. For users not using graphics IC, disable it in UEFI, this will save about 1.5W energy on idle. Pins marked CN19 are ATX power On/Off button. Signed-off-by: Tomasz Maciej Nowak --- diff --git a/target/linux/x86/base-files/etc/board.d/02_network b/target/linux/x86/base-files/etc/board.d/02_network index 5befba0a62..094a45f914 100644 --- a/target/linux/x86/base-files/etc/board.d/02_network +++ b/target/linux/x86/base-files/etc/board.d/02_network @@ -8,6 +8,14 @@ board_config_update case "$(board_name)" in +barracuda-networks-inc-barracuda-ng-firewall-f12) + ucidef_set_network_device_path "eth1" "pci0000:00/0000:00:14.0/0000:01:00.0" + ucidef_set_network_device_path "eth2" "pci0000:00/0000:00:14.1/0000:02:00.0" + ucidef_set_network_device_path "eth3" "pci0000:00/0000:00:13.0/0000:03:00.0" + ucidef_set_network_device_path "eth4" "pci0000:00/0000:00:13.1/0000:04:00.0" + ucidef_set_network_device_path "eth5" "pci0000:00/0000:00:13.2/0000:05:00.0" + ucidef_set_interfaces_lan_wan "eth2 eth3 eth4 eth5" "eth1" + ;; cisco-mx100-hw) ucidef_set_network_device_path "mgmt" "pci0000:00/0000:00:01.2/0000:03:00.3" ucidef_set_network_device_path "wan" "pci0000:00/0000:00:01.2/0000:03:00.2"