From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri, 8 Mar 2013 18:46:00 +0000 (-0800)
Subject: drm/i915: don't use plane pipe select on VLV
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=da6ecc5decf6243a93dd0ecae4a4a773bf21dcce;p=openwrt%2Fstaging%2Fblogic.git

drm/i915: don't use plane pipe select on VLV

Planes are fixed to pipes in VLV.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f73fc3df2bf8..6953f88bf04d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1267,7 +1267,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
 	int cur_pipe;
 
 	/* Planes are fixed to pipes on ILK+ */
-	if (HAS_PCH_SPLIT(dev_priv->dev)) {
+	if (HAS_PCH_SPLIT(dev_priv->dev) || IS_VALLEYVIEW(dev_priv->dev)) {
 		reg = DSPCNTR(pipe);
 		val = I915_READ(reg);
 		WARN((val & DISPLAY_PLANE_ENABLE),
@@ -4743,10 +4743,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	/* Set up the display plane register */
 	dspcntr = DISPPLANE_GAMMA_ENABLE;
 
-	if (pipe == 0)
-		dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
-	else
-		dspcntr |= DISPPLANE_SEL_PIPE_B;
+	if (!IS_VALLEYVIEW(dev)) {
+		if (pipe == 0)
+			dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
+		else
+			dspcntr |= DISPPLANE_SEL_PIPE_B;
+	}
 
 	if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
 		/* Enable pixel doubling when the dot clock is > 90% of the (display)