From: Taehee Yoo <ap420073@gmail.com>
Date: Sat, 9 May 2015 09:15:23 +0000 (+0900)
Subject: rtlwifi: rtl8192cu: Remove setting REG_BCN_MAX_ERR code in _rtl92cu_set_media_status().
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=dacc7e1939852b7e85f64720bb1cb4563dbd5489;p=openwrt%2Fstaging%2Fblogic.git

rtlwifi: rtl8192cu: Remove setting REG_BCN_MAX_ERR code in _rtl92cu_set_media_status().

Initialization routine set REG_BCN_MAX_ERR to 0xFF.
also _rtl92cu_set_media_status set REG_BCN_MAX_ERR to same value.
so i remove this code.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index d310d55d800e..3c1639ba7f99 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1323,7 +1323,6 @@ static int _rtl92cu_set_media_status(struct ieee80211_hw *hw,
 	enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
 
 	bt_msr &= 0xfc;
-	rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xFF);
 	if (type == NL80211_IFTYPE_UNSPECIFIED || type ==
 	    NL80211_IFTYPE_STATION) {
 		_rtl92cu_stop_tx_beacon(hw);