From: Lars Wessels Date: Thu, 25 Jun 2020 19:09:59 +0000 (+0200) Subject: ramips: add support for WAVLINK WL-WN577A2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=dbaf0d20bb6afec4a592456af6b1238b46fa1acb;p=openwrt%2Fstaging%2Flinusw.git ramips: add support for WAVLINK WL-WN577A2 This commit adds support for the Wavlink WL-WN577A2 (black case) dual-band wall-plug wireless router. In Germany this device is sold under the brand name Maginon WL-755 (white case): Device specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 2x 10/100 Mbps (Ralink RT3050) - 2.4 GHz: 802.11b/g/n SoC - 5 GHz: 802.11a/n/ac MT7610E - Antennas: internal - 4 green LEDs: 1 programmable (WPS) + LAN, WAN, POWER - Buttons: Reset, WPS - Small sliding power switch Flashing instructions (U-boot): - Configure a TFTP server on your PC/Laptop and set its IP to 192.168.10.100 - Rename the OpenWrt image to firmware.bin and place it in the root folder of the TFTP server - Power off (using the small sliding power switch on the left side) the device and connect an ethernet cable from its LAN or WAN port to your PC/Laptop - Press the WPS button (and keep it pressed) - Power on the device (using the small power switch) - After a few seconds, when the WAN/LAN LED stops blinking very fast, release the WPS button - Flashing OpenWrt takes less than a minute, system will reboot automatically - After reboot the WPS LED will indicate the current OpenWrt running status Signed-off-by: Lars Wessels [removed unused labels - fix whitespace errors - wrap commit message] Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts b/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts new file mode 100644 index 0000000000..41dfec3275 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "mt7628an.dtsi" + +/ { + compatible = "wavlink,wl-wn577a2", "maginon,wlr-755", "mediatek,mt7628an-soc"; + model = "WAVLINK WL-WN577A2"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "wl-wn577a2:green:lan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "wl-wn577a2:green:wan"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + + led_wps: wps { + label = "wl-wn577a2:green:wps"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "wdt", "p0led_an", "p3led_an", "p4led_an"; + function = "gpio"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&wmac { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&esw { + mediatek,portmap = <0x2f>; +}; + +&usbphy { + status = "disabled"; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index a18afefd74..605537ace3 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -556,6 +556,16 @@ define Device/wavlink_wl-wn575a3 endef TARGET_DEVICES += wavlink_wl-wn575a3 +define Device/wavlink_wl-wn577a2 + IMAGE_SIZE := 7872k + DEVICE_VENDOR := Wavlink + DEVICE_MODEL := WL-WN577A2 + DEVICE_ALT0_VENDOR := Maginon + DEVICE_ALT0_MODEL := WLR-755 + DEVICE_PACKAGES := kmod-mt76x0e +endef +TARGET_DEVICES += wavlink_wl-wn577a2 + define Device/widora_neo-16m IMAGE_SIZE := 16064k DEVICE_VENDOR := Widora diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index fc582becb9..9db39cbdde 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -122,6 +122,10 @@ wavlink,wl-wn575a3) ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84" ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100" ;; +wavlink,wl-wn577a2) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x8" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ;; zbtlink,zbt-we1226) set_wifi_led "$boardname:green:wlan" ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 2b4ca0926f..1cccc16415 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -38,7 +38,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; - buffalo,wcr-1166ds) + buffalo,wcr-1166ds|\ + wavlink,wl-wn577a2) ucidef_add_switch "switch0" \ "3:lan" "4:wan" "6@eth0" ;; @@ -186,6 +187,10 @@ ramips_setup_macs() wiznet,wizfi630s) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1) ;; + wavlink,wl-wn577a2) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$(mtd_get_mac_binary factory 0x4) + ;; skylab,skw92a|\ totolink,lr1200) wan_mac=$(mtd_get_mac_binary factory 0x2e)