From: Ricardo Neri Date: Thu, 21 Jun 2012 08:08:53 +0000 (+0200) Subject: ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=dc57aef503859dbf724f6126c58b2e1672e215f3;p=openwrt%2Fstaging%2Fblogic.git ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled As per the OMAP4 documentation, audio over HDMI must be transmitted in no-idle mode. This patch adds the HWMOD_SWSUP_SIDLE so that omap_hwmod uses no-idle/force-idle settings instead of smart-idle mode. This is required as the DSS interface clock is used as functional clock for the HDMI wrapper audio FIFO. If no-idle mode is not used, audio could be choppy, have bad quality or not be audible at all. Signed-off-by: Ricardo Neri [b-cousson@ti.com: Update the subject and align the .flags location with the script template] Signed-off-by: Benoit Cousson Signed-off-by: Paul Walmsley --- diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index c4c9cdd4c0cf..f30e861ce6d9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -853,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk",