From: Jeroen Peelaerts Date: Tue, 9 Feb 2021 22:33:51 +0000 (+0100) Subject: lantiq: use ActualNetDataRate for speed reporting X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=dd43fae67bbcc0383e7fa50d3abb61bba096a98c;p=openwrt%2Fstaging%2Fadrian.git lantiq: use ActualNetDataRate for speed reporting Switch to Actual Net Data Rate (ACTNDR) for speed reporting on lantiq VDSL modems Refer to ITU-T G.997.1 chapter 7.5.2.8 Independent whether retransmission is used or not in a given transmit direction: - In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operating. - In L2 state, the parameter contains the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) in the previous L0 state. Signed-off-by: Jeroen Peelaerts Reviewed-by: Andre Heider (cherry picked from commit 4f27ea7c33447f4b0c8e577509726927916b9625) --- diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile index 8b8ffdc7a2..88385b9aa5 100644 --- a/package/network/config/ltq-vdsl-app/Makefile +++ b/package/network/config/ltq-vdsl-app/Makefile @@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=ltq-vdsl-app PKG_VERSION:=4.17.18.6 -PKG_RELEASE:=7 +PKG_RELEASE:=8 PKG_BASE_NAME:=dsl_cpe_control PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz PKG_SOURCE_URL:=@OPENWRT diff --git a/package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c b/package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c index 52b2be20e1..8eefdfe4d5 100644 --- a/package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c +++ b/package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c @@ -532,7 +532,12 @@ static void g997_channel_status(int fd, DSL_AccessDir_t direction) { IOCTL_DIR(DSL_G997_ChannelStatus_t, DSL_FIO_G997_CHANNEL_STATUS_GET, direction); m_u32("interleave_delay", out.data.ActualInterleaveDelay * 10); +#ifndef INCLUDE_DSL_CPE_API_DANUBE + // prefer ACTNDR, see comments in drv_dsl_cpe_api_g997.h + m_u32("data_rate", out.data.ActualNetDataRate); +#else m_u32("data_rate", out.data.ActualDataRate); +#endif } static void g997_line_status(int fd, DSL_AccessDir_t direction) {