From: Florian Fainelli Date: Sat, 18 Jul 2009 12:35:16 +0000 (+0000) Subject: switch to 2.6.30.1 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=dece660b0f1dc085a179855c6582d3c2d5ad8454;p=openwrt%2Fstaging%2Fneocturne.git switch to 2.6.30.1 SVN-Revision: 16896 --- diff --git a/target/linux/au1000/Makefile b/target/linux/au1000/Makefile index 9800b793cf..812f9da6bd 100644 --- a/target/linux/au1000/Makefile +++ b/target/linux/au1000/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=RMI/AMD AU1x00 FEATURES:=jffs2 usb pci SUBTARGETS=au1500 au1550 -LINUX_VERSION:=2.6.28.10 +LINUX_VERSION:=2.6.30.1 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += hostapd-mini yamonenv diff --git a/target/linux/au1000/au1500/config-default b/target/linux/au1000/au1500/config-default index 2b3ddb65c8..e459010c50 100644 --- a/target/linux/au1000/au1500/config-default +++ b/target/linux/au1000/au1500/config-default @@ -1,7 +1,6 @@ CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_8139TOO is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -11,11 +10,14 @@ CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_BASE_SMALL=0 # CONFIG_BCM47XX is not set +# CONFIG_BINARY_PRINTF is not set CONFIG_BITREVERSE=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CEVT_R4K_LIB=y CONFIG_CMDLINE="root=/dev/mtdblock0 rootfstype=squashfs,jffs2" # CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_CPU_HAS_SYNC=y @@ -47,31 +49,38 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y # CONFIG_CPU_VR41XX is not set CONFIG_CRAMFS=m CONFIG_CRC16=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_GF128MUL=m -CONFIG_CSRC_R4K=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_DEVPORT=y # CONFIG_DM9000 is not set CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_DMA_NONCOHERENT=y CONFIG_DUMMY=m CONFIG_ELF_CORE=y -# CONFIG_FREEZER is not set CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GPIOLIB=y # CONFIG_HAMRADIO is not set CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_AOUT is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_HAVE_IDE=y +CONFIG_HAVE_MLOCK=y CONFIG_HAVE_OPROFILE=y CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=y @@ -84,20 +93,13 @@ CONFIG_I2C_ALGOPCA=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IDE is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQ_CPU=y CONFIG_KEXEC=y -CONFIG_KMOD=y -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_TRIGGERS is not set +CONFIG_LEDS_GPIO=y # CONFIG_LEMOTE_FULONG is not set CONFIG_MACH_ALCHEMY=y # CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_EMMA is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MACH_TX39XX is not set # CONFIG_MACH_TX49XX is not set @@ -113,6 +115,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1500 is not set # CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_FPU_EMU is not set CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_MIPS_MACHINE is not set # CONFIG_MIPS_MALTA is not set @@ -134,24 +137,15 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_START=0x8000000 # CONFIG_NATSEMI is not set -# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_NO_IOPORT is not set # CONFIG_NXP_STB220 is not set # CONFIG_NXP_STB225 is not set CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCSPKR_PLATFORM=y CONFIG_PHYLIB=y -# CONFIG_PHYS_ADDR_T_64BIT is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_PNX8550_JBS is not set @@ -159,9 +153,7 @@ CONFIG_PHYLIB=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_PROM_EMU is not set -# CONFIG_R6040 is not set -CONFIG_RESOURCES_64BIT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_8250_EXTENDED is not set @@ -180,6 +172,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SLOW_WORK is not set CONFIG_SOC_AU1500=y CONFIG_SOC_AU1X00=y CONFIG_SOFT_WATCHDOG=m @@ -191,9 +184,8 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y # CONFIG_TC35815 is not set CONFIG_TICK_ONESHOT=y +CONFIG_TRACING_SUPPORT=y CONFIG_TRAD_SIGNALS=y CONFIG_USB_SUPPORT=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set CONFIG_WDT_MTX1=y CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/au1000/patches-2.6.30/001-mtx1_cmdline.patch b/target/linux/au1000/patches-2.6.30/001-mtx1_cmdline.patch new file mode 100644 index 0000000000..a45832765c --- /dev/null +++ b/target/linux/au1000/patches-2.6.30/001-mtx1_cmdline.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/alchemy/mtx-1/init.c ++++ b/arch/mips/alchemy/mtx-1/init.c +@@ -49,7 +49,7 @@ void __init prom_init(void) + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + +- prom_init_cmdline(); ++ strcpy(arcs_cmdline, CONFIG_CMDLINE); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) diff --git a/target/linux/au1000/patches-2.6.30/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.30/002-openwrt_rootfs.patch new file mode 100644 index 0000000000..e1056e93d9 --- /dev/null +++ b/target/linux/au1000/patches-2.6.30/002-openwrt_rootfs.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/alchemy/mtx-1/platform.c ++++ b/arch/mips/alchemy/mtx-1/platform.c +@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_ + + static struct mtd_partition mtx1_mtd_partitions[] = { + { +- .name = "filesystem", ++ .name = "rootfs", + .size = 0x01C00000, + .offset = 0, + }, diff --git a/target/linux/au1000/patches-2.6.30/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.30/003-au1000_eth_ioctl.patch new file mode 100644 index 0000000000..db52b0fd75 --- /dev/null +++ b/target/linux/au1000/patches-2.6.30/003-au1000_eth_ioctl.patch @@ -0,0 +1,19 @@ +Index: linux-2.6.30.1/drivers/net/au1000_eth.c +=================================================================== +--- linux-2.6.30.1.orig/drivers/net/au1000_eth.c 2009-07-03 01:52:38.000000000 +0200 ++++ linux-2.6.30.1/drivers/net/au1000_eth.c 2009-07-18 12:26:58.000000000 +0200 +@@ -1036,10 +1036,14 @@ + } + } + ++#define AU1000_KNOWN_PHY_IOCTLS (SIOCGMIIPHY & 0xfff0) + static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) + { + struct au1000_private *aup = netdev_priv(dev); + ++ if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS) ++ return -EINVAL; ++ + if (!netif_running(dev)) return -EINVAL; + + if (!aup->phy_dev) return -EINVAL; // PHY not controllable diff --git a/target/linux/au1000/patches-2.6.30/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.30/004-state_led_phy_fix.patch new file mode 100644 index 0000000000..e681970c5b --- /dev/null +++ b/target/linux/au1000/patches-2.6.30/004-state_led_phy_fix.patch @@ -0,0 +1,31 @@ +--- a/drivers/net/au1000_eth.c ++++ b/drivers/net/au1000_eth.c +@@ -184,6 +184,15 @@ struct au1000_private *au_macs[NUM_ETH_I + # undef AU1XXX_PHY1_IRQ + #endif + ++#if defined(CONFIG_MIPS_MTX1) ++/* ++ * 4G MeshCube (MTX-1) board ++ * PHY is at address 31 on MAC0 ++ * autodetect fails if not searched for highest address ! ++ */ ++# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR ++#endif ++ + #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0) + # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet + #endif +@@ -380,6 +389,12 @@ static int mii_probe (struct net_device + aup->old_duplex = -1; + aup->phy_dev = phydev; + ++#ifdef CONFIG_MIPS_MTX1 ++ /* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */ ++ printk(KERN_INFO "MTX-1 PHY: updating LED settings\n"); ++ phy_write(phydev, 0x11, 0xff80); ++#endif ++ + printk(KERN_INFO "%s: attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, irq=%d)\n", + dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq); diff --git a/target/linux/au1000/patches-2.6.30/006-missing_string_header.patch b/target/linux/au1000/patches-2.6.30/006-missing_string_header.patch new file mode 100644 index 0000000000..8aba202521 --- /dev/null +++ b/target/linux/au1000/patches-2.6.30/006-missing_string_header.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/alchemy/mtx-1/init.c ++++ b/arch/mips/alchemy/mtx-1/init.c +@@ -32,6 +32,7 @@ + #include + + #include ++#include + + #include +