From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Fri, 18 Jan 2013 00:39:24 +0000 (-0700)
Subject: staging: comedi: addi_apci_2200: remove use of devpriv->s_EeParameters
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=dfc252583cc0dc7d164ebd84b4aba0f545e8401e;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: addi_apci_2200: remove use of devpriv->s_EeParameters

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing it through devpriv->s_EeParameters.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index 490870bfee91..cc0111cfab01 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -86,21 +86,6 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
 	dev->iobase = pci_resource_start(pcidev, 1);
 
-	/* Initialize parameters that can be overridden in EEPROM */
-	devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
-	devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
-	devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
-	devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
-	devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
-	devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
-	devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
-	devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
-	devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
-	devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
-		this_board->ui_MinAcquisitiontimeNs;
-	devpriv->s_EeParameters.ui_MinDelaytimeNs =
-		this_board->ui_MinDelaytimeNs;
-
 	/* ## */
 
 	if (pcidev->irq > 0) {
@@ -125,13 +110,12 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise DI Subdevice Structures */
 	s = &dev->subdevices[2];
-	if (devpriv->s_EeParameters.i_NbrDiChannel) {
+	if (this_board->i_NbrDiChannel) {
 		s->type = COMEDI_SUBD_DI;
 		s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
+		s->n_chan = this_board->i_NbrDiChannel;
 		s->maxdata = 1;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDiChannel;
+		s->len_chanlist = this_board->i_NbrDiChannel;
 		s->range_table = &range_digital;
 		s->io_bits = 0;	/* all bits input */
 		s->insn_config = this_board->di_config;
@@ -143,14 +127,13 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 	}
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[3];
-	if (devpriv->s_EeParameters.i_NbrDoChannel) {
+	if (this_board->i_NbrDoChannel) {
 		s->type = COMEDI_SUBD_DO;
 		s->subdev_flags =
 			SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
-		s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDoChannel;
+		s->n_chan = this_board->i_NbrDoChannel;
+		s->maxdata = this_board->i_DoMaxdata;
+		s->len_chanlist = this_board->i_NbrDoChannel;
 		s->range_table = &range_digital;
 		s->io_bits = 0xf;	/* all bits output */
 
@@ -165,7 +148,7 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = &dev->subdevices[4];
-	if (devpriv->s_EeParameters.i_Timer) {
+	if (this_board->i_Timer) {
 		s->type = COMEDI_SUBD_TIMER;
 		s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 		s->n_chan = 1;