From: Chen Hu Date: Fri, 27 Jul 2018 10:32:41 +0000 (+0800) Subject: serial: 8250_dw: always set baud rate in dw8250_set_termios X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=dfcab6ba573445c703235ab6c83758eec12d7f28;p=openwrt%2Fstaging%2Fblogic.git serial: 8250_dw: always set baud rate in dw8250_set_termios dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is NULL. This happens during resume. Call Trace: ... [ 54.928108] dw8250_set_termios+0x162/0x170 [ 54.928114] serial8250_set_termios+0x17/0x20 [ 54.928117] uart_change_speed+0x64/0x160 [ 54.928119] uart_resume_port ... So the baud rate is not restored after S3 and breaks the apps who use UART, for example, console and bluetooth etc. We address this issue by setting the baud rate irrespective of arg "old", just like the drivers for other 8250 IPs. This is tested with Intel Broxton platform. Signed-off-by: Chen Hu Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms") Cc: Heikki Krogerus Cc: stable Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index b4e6f31936f5..27b7ecc3b59b 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -310,7 +310,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, long rate; int ret; - if (IS_ERR(d->clk) || !old) + if (IS_ERR(d->clk)) goto out; clk_disable_unprepare(d->clk);