From: Milton Miller <miltonm@bga.com>
Date: Tue, 10 May 2011 19:29:49 +0000 (+0000)
Subject: powerpc/xics: Cleanup xics_host_map and ipi
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e085255ebce87c0b85d4752638d8a7d4f35f5b64;p=openwrt%2Fstaging%2Fblogic.git

powerpc/xics: Cleanup xics_host_map and ipi

Since we already have a special case in map to set the ipi handler, use
the desired flow.

If we don't find an ics to handle the interrupt complain instead of
returning 0 without having set a chip or handler.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index a31a7103218f..43b2a791e204 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -135,9 +135,8 @@ static void xics_request_ipi(void)
 
 	/*
 	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
+	 * disabled, and PERCPU.  The handler was set in map.
 	 */
-	irq_set_handler(ipi, handle_percpu_irq);
 	BUG_ON(request_irq(ipi, icp_ops->ipi_action,
 			   IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
 }
@@ -341,15 +340,16 @@ static int xics_host_map(struct irq_host *h, unsigned int virq,
 	/* Don't call into ICS for IPIs */
 	if (hw == XICS_IPI) {
 		irq_set_chip_and_handler(virq, &xics_ipi_chip,
-					 handle_fasteoi_irq);
+					 handle_percpu_irq);
 		return 0;
 	}
 
 	/* Let the ICS setup the chip data */
 	list_for_each_entry(ics, &ics_list, link)
 		if (ics->map(ics, virq) == 0)
-			break;
-	return 0;
+			return 0;
+
+	return -EINVAL;
 }
 
 static int xics_host_xlate(struct irq_host *h, struct device_node *ct,