From: Mathias Kresin Date: Wed, 12 Apr 2017 06:45:19 +0000 (+0200) Subject: ar71xx: fix ath9k default LED changes fallout X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e20965811db65eab98adbd0b73c64f94325dfa23;p=openwrt%2Fstaging%2Fynezz.git ar71xx: fix ath9k default LED changes fallout Since 192f0a3db859 ("ath9k: unset the default LED pin if used by platform leds") the default ath9k wireless LED is not set as soon as any pin of the ath ath9k gpio controller is used. All touched boards have leds defined which are using the gpio pins exposed by the ath9k driver but rely on a default set wireless led trigger. Add the wireless leds were missing and setup the wireless phy trigger in userspace. Signed-off-by: Russell Senior Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 44d06fc1e1..2f3e5efd57 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -743,6 +743,7 @@ tl-wr1043nd-v4) ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" ;; tl-wr2543n) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" ;; tube2h) @@ -847,6 +848,8 @@ wpn824n) wzr-hp-ag300h) ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "buffalo:amber:band2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "buffalo:amber:band5g" "phy1tpt" ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1" ;; wzr-hp-g300nh) @@ -854,6 +857,10 @@ wzr-hp-g300nh) ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1" ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1" ;; +wzr-hp-g300nh2|\ +wzr-hp-g450h) + ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt" + ;; xd3200) ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt" ;; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c index 8f6db5eda1..141914aa29 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c @@ -59,6 +59,11 @@ static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { }; static struct gpio_led tl_wr2543n_wmac_leds_gpio[] = { + { + .name = "tp-link:green:wlan2g", + .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN2G, + .active_low = 1, + }, { .name = "tp-link:green:wlan5g", .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN5G, @@ -125,17 +130,6 @@ static void __init tl_wr2543n_setup(void) tl_wr2543n_gpio_keys); ath79_register_usb(); - /* - * The ath9k driver uses this pin for its default led device, which is - * named ath9k-phy0, and reflects activity on either the 2 GHz or 5 GHz - * bands. This pin is connected to the WR2543's 2GHz WLAN LED. - */ - ap9x_pci_setup_wmac_led_pin(0, TL_WR2543N_GPIO_WMAC_LED_WLAN2G); - - /* - * We also have the driver set up an led device for the WR2543's - * separate 5 GHz WLAN LED in case the user wants it. - */ ap9x_pci_setup_wmac_leds(0, tl_wr2543n_wmac_leds_gpio, ARRAY_SIZE(tl_wr2543n_wmac_leds_gpio)); ap91_pci_init(eeprom, mac); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c index 296551348f..c44a9cf770 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c @@ -74,6 +74,11 @@ static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { .gpio = 4, .active_low = 1, }, + { + .name = "buffalo:green:wireless", + .gpio = 5, + .active_low = 1, + }, { .name = "buffalo:orange:security", .gpio = 6, @@ -159,7 +164,6 @@ static void __init wzrhpg300nh2_setup(void) ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, ARRAY_SIZE(wzrhpg300nh2_gpio_keys), wzrhpg300nh2_gpio_keys); - ap9x_pci_setup_wmac_led_pin(0, 5); ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio, ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c index 53f37b0981..5d235c49f4 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c @@ -84,6 +84,11 @@ static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = { .gpio = 14, .active_low = 1, }, + { + .name = "buffalo:green:wireless", + .gpio = 15, + .active_low = 1, + }, }; static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = { @@ -156,7 +161,6 @@ static void __init wzrhpg450h_init(void) ap91_pci_init(ee, NULL); ap9x_pci_get_wmac_data(0)->tx_gain_buffalo = true; ap9x_pci_get_wmac_data(1)->tx_gain_buffalo = true; - ap9x_pci_setup_wmac_led_pin(0, 15); ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio, ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio)); }