From: John Crispin Date: Thu, 18 Jun 2015 18:20:46 +0000 (+0000) Subject: ramips: Add support for the D-Link DCS-930 B1 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e26ba31f76a4498be4080a8481f010d6a6cd54ed;p=openwrt%2Fstaging%2Fnbd.git ramips: Add support for the D-Link DCS-930 B1 http://wiki.openwrt.org/toh/d-link/dcs-930l Signed-off-by: L. D. Pinney SVN-Revision: 46042 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index c63ff47585..a5a8400775 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -85,6 +85,10 @@ case $board in ucidef_set_led_default "power" "POWER" "d105:red:power" "1" set_usb_led "d105:green:usb" ;; + dcs-930l-b1) + ucidef_set_led_default "power" "POWER" "d-link:red:power" "1" + ucidef_set_led_netdev "wifi" "WiFi" "d-link:blue:wps" + ;; dir-300-b1|\ dir-600-b1|\ dir-600-b2|\ diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index b3dd1f1c3d..4849238390 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -53,6 +53,7 @@ ramips_setup_interfaces() all5003 | \ broadway | \ dcs-930| \ + dcs-930l-b1| \ ht-tm02| \ ncs601w | \ wnce2001) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index bfc92e5e4e..8bcc532d98 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -48,6 +48,9 @@ get_status_led() { dcs-930 | dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1) status_led="d-link:green:status" ;; + dcs-930l-b1) + status_led="d-link:red:power" + ;; dir-645) status_led="d-link:green:wps" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 14ffc212d2..2d007163f3 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -106,6 +106,9 @@ ramips_board_detect() { *"DCS-930") name="dcs-930" ;; + *"DCS-930L B1") + name="dcs-930l-b1" + ;; *"DIR-300 B1") name="dir-300-b1" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 8d5f74ff09..f3e8ed5e69 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -37,6 +37,7 @@ platform_check_image() { d105 | \ dap-1350 | \ dcs-930 | \ + dcs-930l-b1 | \ dir-300-b1 | \ dir-300-b7 | \ dir-320-b1 | \ diff --git a/target/linux/ramips/dts/DCS-930L-B1.dts b/target/linux/ramips/dts/DCS-930L-B1.dts new file mode 100644 index 0000000000..f73a9973cf --- /dev/null +++ b/target/linux/ramips/dts/DCS-930L-B1.dts @@ -0,0 +1,103 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "DCS-930L-B1", "ralink,rt5350-soc"; + model = "D-Link DCS-930L B1"; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "s25fl064k"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf", "led"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "d-link:red:power"; + gpios = <&gpio0 17 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 19 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 20 1>; + linux,code = <0x211>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index afbe56770f..0c455c23f4 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -514,6 +514,7 @@ define BuildFirmware/DCS930/squashfs endef BuildFirmware/DCS930/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) Image/Build/Profile/DCS930=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930,DCS-930) +Image/Build/Profile/DCS930LB1=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930l-b1,DCS-930L-B1) Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753) @@ -717,6 +718,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DAP1350,$(1)) $(call Image/Build/Profile/DAP1350WW,$(1)) $(call Image/Build/Profile/DCS930,$(1)) + $(call Image/Build/Profile/DCS930LB1,$(1)) $(call Image/Build/Profile/ESR-9753,$(1)) $(call Image/Build/Profile/F7C027,$(1)) $(call Image/Build/Profile/F5D8235V2,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/dlink.mk b/target/linux/ramips/rt305x/profiles/dlink.mk index 5253460786..5fc5709d73 100644 --- a/target/linux/ramips/rt305x/profiles/dlink.mk +++ b/target/linux/ramips/rt305x/profiles/dlink.mk @@ -44,6 +44,19 @@ endef $(eval $(call Profile,DCS930)) +define Profile/DCS930LB1 + NAME:=Dlink DCS-930L B1 + PACKAGES:=kmod-video-core kmod-video-uvc \ + kmod-sound-core kmod-usb-audio \ + kmod-usb-core kmod-usb-ohci kmod-usb2 +endef + +define Profile/DCS930LB1/Description + Package set for Dlink DCS-930L B1 board +endef + +$(eval $(call Profile,DCS930LB1)) + define Profile/DIR610A1 NAME:=Dlink DIR-610 A1 PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer