From: Koen Vandeputte Date: Thu, 21 Nov 2019 13:09:35 +0000 (+0100) Subject: kernel: bump 4.19 to 4.19.85 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e29500eb849a18fa988a6ce53e10ad8c188e35df;p=openwrt%2Fstaging%2Fjogo.git kernel: bump 4.19 to 4.19.85 Refreshed all patches. Altered patches: - 080-sata_support.patch Remove upstreamed: - 034-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch - 001-4.21-01-BCM63XX-fix-switch-core-reset-on-BCM6368.patch - 073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte --- diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 0050a35ff5..e8be42afc4 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -8,11 +8,11 @@ endif LINUX_VERSION-4.9 = .202 LINUX_VERSION-4.14 = .155 -LINUX_VERSION-4.19 = .84 +LINUX_VERSION-4.19 = .85 LINUX_KERNEL_HASH-4.9.202 = 8108ec1cd10fc40821c84e9f087dba10b1767aad66596f4a36925faef55e4ebf LINUX_KERNEL_HASH-4.14.155 = 77d61979556b81c95b81452fa10e1fe9368cbe2f9f80a13e4669b0464722e481 -LINUX_KERNEL_HASH-4.19.84 = 868b4a92619cb00ab142a20a67f000525b9605820d1b66faa4a183133eac0660 +LINUX_KERNEL_HASH-4.19.85 = 7bf435970aeeafd46263f49730087a61c4858d8b8fc5a4002ceac971b45f4fb7 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1)))) sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1))))))) diff --git a/target/linux/brcm2708/patches-4.19/950-0129-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch b/target/linux/brcm2708/patches-4.19/950-0129-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch index 2f1d32754c..c28ce4081f 100644 --- a/target/linux/brcm2708/patches-4.19/950-0129-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch +++ b/target/linux/brcm2708/patches-4.19/950-0129-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch @@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell /* Device and char device-related information */ static DEFINE_IDA(gpio_ida); static dev_t gpio_devt; -@@ -2634,7 +2636,7 @@ int gpiod_direction_output(struct gpio_d +@@ -2654,7 +2656,7 @@ int gpiod_direction_output(struct gpio_d value = !!value; /* GPIOs used for IRQs shall not be set as output */ @@ -35,7 +35,7 @@ Signed-off-by: Phil Elwell gpiod_err(desc, "%s: tried to set a GPIO tied to an IRQ as output\n", __func__); -@@ -3333,7 +3335,7 @@ int gpiochip_lock_as_irq(struct gpio_chi +@@ -3353,7 +3355,7 @@ int gpiochip_lock_as_irq(struct gpio_chi } } diff --git a/target/linux/brcm2708/patches-4.19/950-0134-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch b/target/linux/brcm2708/patches-4.19/950-0134-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch index 6a403d4861..b33c4f4374 100644 --- a/target/linux/brcm2708/patches-4.19/950-0134-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch +++ b/target/linux/brcm2708/patches-4.19/950-0134-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch @@ -37,7 +37,7 @@ Signed-off-by: Dave Stevenson static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data) { u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL); -@@ -3006,8 +3015,14 @@ static int lan78xx_bind(struct lan78xx_n +@@ -3011,8 +3020,14 @@ static int lan78xx_bind(struct lan78xx_n if (DEFAULT_RX_CSUM_ENABLE) dev->net->features |= NETIF_F_RXCSUM; diff --git a/target/linux/brcm2708/patches-4.19/950-0298-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch b/target/linux/brcm2708/patches-4.19/950-0298-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch index d4e61c2186..bff441c5e0 100644 --- a/target/linux/brcm2708/patches-4.19/950-0298-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch +++ b/target/linux/brcm2708/patches-4.19/950-0298-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch @@ -28,7 +28,7 @@ See: https://github.com/raspberrypi/linux/issues/2447 static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data) { u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL); -@@ -3819,7 +3824,12 @@ static int lan78xx_probe(struct usb_inte +@@ -3824,7 +3829,12 @@ static int lan78xx_probe(struct usb_inte dev->pipe_intr = usb_rcvintpipe(dev->udev, dev->ep_intr->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); diff --git a/target/linux/brcm2708/patches-4.19/950-0479-lan78xx-use-default-alignment-for-rx-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0479-lan78xx-use-default-alignment-for-rx-buffers.patch index 3bc2582dc4..d8cf36f1ea 100644 --- a/target/linux/brcm2708/patches-4.19/950-0479-lan78xx-use-default-alignment-for-rx-buffers.patch +++ b/target/linux/brcm2708/patches-4.19/950-0479-lan78xx-use-default-alignment-for-rx-buffers.patch @@ -12,7 +12,7 @@ in both dwc_otg and in ipv6 processing. --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c -@@ -3253,7 +3253,7 @@ static int rx_submit(struct lan78xx_net +@@ -3258,7 +3258,7 @@ static int rx_submit(struct lan78xx_net size_t size = dev->rx_urb_size; int ret = 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0542-net-genet-enable-link-energy-detect-powerdown-for-ex.patch b/target/linux/brcm2708/patches-4.19/950-0542-net-genet-enable-link-energy-detect-powerdown-for-ex.patch index 8a1d2f143d..c29457500e 100644 --- a/target/linux/brcm2708/patches-4.19/950-0542-net-genet-enable-link-energy-detect-powerdown-for-ex.patch +++ b/target/linux/brcm2708/patches-4.19/950-0542-net-genet-enable-link-energy-detect-powerdown-for-ex.patch @@ -20,7 +20,7 @@ Signed-off-by: Jonathan Bell --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c -@@ -286,6 +286,8 @@ int bcmgenet_mii_probe(struct net_device +@@ -285,6 +285,8 @@ int bcmgenet_mii_probe(struct net_device /* Communicate the integrated PHY revision */ if (priv->internal_phy) phy_flags = priv->gphy_rev; diff --git a/target/linux/brcm2708/patches-4.19/950-0802-regulator-gpio-Allow-nonexclusive-GPIO-access.patch b/target/linux/brcm2708/patches-4.19/950-0802-regulator-gpio-Allow-nonexclusive-GPIO-access.patch index 2c41dc0127..6276642997 100644 --- a/target/linux/brcm2708/patches-4.19/950-0802-regulator-gpio-Allow-nonexclusive-GPIO-access.patch +++ b/target/linux/brcm2708/patches-4.19/950-0802-regulator-gpio-Allow-nonexclusive-GPIO-access.patch @@ -41,7 +41,7 @@ Signed-off-by: Mark Brown --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c -@@ -3959,8 +3959,23 @@ struct gpio_desc *__must_check gpiod_get +@@ -3979,8 +3979,23 @@ struct gpio_desc *__must_check gpiod_get * the device name as label */ status = gpiod_request(desc, con_id ? con_id : devname); diff --git a/target/linux/brcm2708/patches-4.19/950-0803-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch b/target/linux/brcm2708/patches-4.19/950-0803-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch index f7564a58c0..d8e87919cf 100644 --- a/target/linux/brcm2708/patches-4.19/950-0803-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch +++ b/target/linux/brcm2708/patches-4.19/950-0803-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch @@ -23,7 +23,7 @@ Signed-off-by: Mark Brown --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c -@@ -4033,6 +4033,8 @@ struct gpio_desc *gpiod_get_from_of_node +@@ -4053,6 +4053,8 @@ struct gpio_desc *gpiod_get_from_of_node transitory = flags & OF_GPIO_TRANSITORY; ret = gpiod_request(desc, label); diff --git a/target/linux/brcm47xx/patches-4.19/030-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch b/target/linux/brcm47xx/patches-4.19/030-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch deleted file mode 100644 index c824e28317..0000000000 --- a/target/linux/brcm47xx/patches-4.19/030-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch +++ /dev/null @@ -1,48 +0,0 @@ -From feef7918667b84f9d5653c501542dd8d84ae32af Mon Sep 17 00:00:00 2001 -From: Tuomas Tynkkynen -Date: Sun, 19 Aug 2018 22:20:23 +0300 -Subject: [PATCH] MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Setting GPIO 21 high seems to be required to enable power to USB ports -on the WNDR3400v3. As there is already similar code for WNR3500L, -make the existing USB power GPIO code generic and use that. - -Signed-off-by: Tuomas Tynkkynen -Acked-by: Hauke Mehrtens -Signed-off-by: Paul Burton -Patchwork: https://patchwork.linux-mips.org/patch/20259/ -Cc: Rafał Miłecki -Cc: linux-mips@linux-mips.org -Cc: linux-kernel@vger.kernel.org ---- - arch/mips/bcm47xx/workarounds.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/arch/mips/bcm47xx/workarounds.c -+++ b/arch/mips/bcm47xx/workarounds.c -@@ -5,9 +5,8 @@ - #include - #include - --static void __init bcm47xx_workarounds_netgear_wnr3500l(void) -+static void __init bcm47xx_workarounds_enable_usb_power(int usb_power) - { -- const int usb_power = 12; - int err; - - err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power"); -@@ -23,7 +22,10 @@ void __init bcm47xx_workarounds(void) - - switch (board) { - case BCM47XX_BOARD_NETGEAR_WNR3500L: -- bcm47xx_workarounds_netgear_wnr3500l(); -+ bcm47xx_workarounds_enable_usb_power(12); -+ break; -+ case BCM47XX_BOARD_NETGEAR_WNDR3400_V3: -+ bcm47xx_workarounds_enable_usb_power(21); - break; - default: - /* No workaround(s) needed */ diff --git a/target/linux/brcm63xx/patches-4.19/001-4.21-01-BCM63XX-fix-switch-core-reset-on-BCM6368.patch b/target/linux/brcm63xx/patches-4.19/001-4.21-01-BCM63XX-fix-switch-core-reset-on-BCM6368.patch deleted file mode 100644 index 3914865c89..0000000000 --- a/target/linux/brcm63xx/patches-4.19/001-4.21-01-BCM63XX-fix-switch-core-reset-on-BCM6368.patch +++ /dev/null @@ -1,26 +0,0 @@ -From f1af8bb8e0879a3c2d9679a7274c2774335e9876 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 14 Nov 2018 12:06:41 +0100 -Subject: [PATCH] MIPS: BCM63XX: fix switch core reset on BCM6368 - -The Ethernet Switch core mask was set to 0, causing the switch core to -be not reset on BCM6368 on boot. Provide the proper mask so the switch -core gets reset to a known good state. - -Fixes: 799faa626c71 ("MIPS: BCM63XX: add core reset helper") -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/reset.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/reset.c -+++ b/arch/mips/bcm63xx/reset.c -@@ -120,7 +120,7 @@ - #define BCM6368_RESET_DSL 0 - #define BCM6368_RESET_SAR SOFTRESET_6368_SAR_MASK - #define BCM6368_RESET_EPHY SOFTRESET_6368_EPHY_MASK --#define BCM6368_RESET_ENETSW 0 -+#define BCM6368_RESET_ENETSW SOFTRESET_6368_ENETSW_MASK - #define BCM6368_RESET_PCM SOFTRESET_6368_PCM_MASK - #define BCM6368_RESET_MPI SOFTRESET_6368_MPI_MASK - #define BCM6368_RESET_PCIE 0 diff --git a/target/linux/brcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch index 7ef200ed99..c3b5778e0a 100644 --- a/target/linux/brcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch +++ b/target/linux/brcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch @@ -1,6 +1,6 @@ --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1633,7 +1633,7 @@ static int bcm_enet_change_mtu(struct ne +@@ -1634,7 +1634,7 @@ static int bcm_enet_change_mtu(struct ne return -EBUSY; /* add ethernet header + vlan tag size */ diff --git a/target/linux/brcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch index 2eb36f8216..e30bd5b107 100644 --- a/target/linux/brcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch +++ b/target/linux/brcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch @@ -15,7 +15,7 @@ Signed-off-by: Jonas Gorski --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -866,10 +866,8 @@ static int bcm_enet_open(struct net_devi +@@ -867,10 +867,8 @@ static int bcm_enet_open(struct net_devi struct bcm_enet_priv *priv; struct sockaddr addr; struct device *kdev; @@ -26,7 +26,7 @@ Signed-off-by: Jonas Gorski void *p; u32 val; -@@ -877,40 +875,10 @@ static int bcm_enet_open(struct net_devi +@@ -878,40 +876,10 @@ static int bcm_enet_open(struct net_devi kdev = &priv->pdev->dev; if (priv->has_phy) { @@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski } /* mask all interrupts and request them */ -@@ -920,7 +888,7 @@ static int bcm_enet_open(struct net_devi +@@ -921,7 +889,7 @@ static int bcm_enet_open(struct net_devi ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev); if (ret) @@ -77,7 +77,7 @@ Signed-off-by: Jonas Gorski ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0, dev->name, dev); -@@ -1082,8 +1050,8 @@ static int bcm_enet_open(struct net_devi +@@ -1083,8 +1051,8 @@ static int bcm_enet_open(struct net_devi enet_dmac_writel(priv, priv->dma_chan_int_mask, ENETDMAC_IRMASK, priv->tx_chan); @@ -88,7 +88,7 @@ Signed-off-by: Jonas Gorski else bcm_enet_adjust_link(dev); -@@ -1124,10 +1092,6 @@ out_freeirq_rx: +@@ -1125,10 +1093,6 @@ out_freeirq_rx: out_freeirq: free_irq(dev->irq, dev); @@ -99,7 +99,7 @@ Signed-off-by: Jonas Gorski return ret; } -@@ -1232,10 +1196,6 @@ static int bcm_enet_stop(struct net_devi +@@ -1233,10 +1197,6 @@ static int bcm_enet_stop(struct net_devi free_irq(priv->irq_rx, dev); free_irq(dev->irq, dev); @@ -110,7 +110,7 @@ Signed-off-by: Jonas Gorski return 0; } -@@ -1801,14 +1761,47 @@ static int bcm_enet_probe(struct platfor +@@ -1802,14 +1762,47 @@ static int bcm_enet_probe(struct platfor /* do minimal hardware init to be able to probe mii bus */ bcm_enet_hw_preinit(priv); @@ -159,7 +159,7 @@ Signed-off-by: Jonas Gorski } bus = priv->mii_bus; -@@ -1832,6 +1825,35 @@ static int bcm_enet_probe(struct platfor +@@ -1833,6 +1826,35 @@ static int bcm_enet_probe(struct platfor dev_err(&pdev->dev, "unable to register mdio bus\n"); goto out_free_mdio; } @@ -195,7 +195,7 @@ Signed-off-by: Jonas Gorski } else { /* run platform code to initialize PHY device */ -@@ -1839,45 +1861,16 @@ static int bcm_enet_probe(struct platfor +@@ -1840,45 +1862,16 @@ static int bcm_enet_probe(struct platfor pd->mii_config(dev, 1, bcm_enet_mdio_read_mii, bcm_enet_mdio_write_mii)) { dev_err(&pdev->dev, "unable to configure mdio bus\n"); @@ -245,7 +245,7 @@ Signed-off-by: Jonas Gorski if (priv->mii_bus) mdiobus_unregister(priv->mii_bus); -@@ -1885,6 +1878,9 @@ out_free_mdio: +@@ -1886,6 +1879,9 @@ out_free_mdio: if (priv->mii_bus) mdiobus_free(priv->mii_bus); @@ -255,7 +255,7 @@ Signed-off-by: Jonas Gorski out_uninit_hw: /* turn off mdc clock */ enet_writel(priv, 0, ENET_MIISC_REG); -@@ -1915,6 +1911,7 @@ static int bcm_enet_remove(struct platfo +@@ -1916,6 +1912,7 @@ static int bcm_enet_remove(struct platfo enet_writel(priv, 0, ENET_MIISC_REG); if (priv->has_phy) { diff --git a/target/linux/brcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch index 772e40b2b5..86940ae14d 100644 --- a/target/linux/brcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch +++ b/target/linux/brcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch @@ -32,7 +32,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports #define ENETSW_MDIOC_EXT_MASK (1 << 16) --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -2184,6 +2184,18 @@ static int bcm_enetsw_open(struct net_de +@@ -2185,6 +2185,18 @@ static int bcm_enetsw_open(struct net_de priv->sw_port_link[i] = 0; } diff --git a/target/linux/brcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch index 641c477ee5..3f093cf65c 100644 --- a/target/linux/brcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch +++ b/target/linux/brcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch @@ -20,7 +20,7 @@ #include #include "bcm63xx_enet.h" -@@ -1931,7 +1932,8 @@ static int bcm_enet_remove(struct platfo +@@ -1932,7 +1933,8 @@ static int bcm_enet_remove(struct platfo return 0; } @@ -30,7 +30,7 @@ .probe = bcm_enet_probe, .remove = bcm_enet_remove, .driver = { -@@ -1940,6 +1942,42 @@ struct platform_driver bcm63xx_enet_driv +@@ -1941,6 +1943,42 @@ struct platform_driver bcm63xx_enet_driv }, }; @@ -73,7 +73,7 @@ /* * switch mii access callbacks */ -@@ -2196,29 +2234,6 @@ static int bcm_enetsw_open(struct net_de +@@ -2197,29 +2235,6 @@ static int bcm_enetsw_open(struct net_de enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i)); } @@ -103,7 +103,7 @@ /* initialize flow control buffer allocation */ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0, ENETDMA_BUFALLOC_REG(priv->rx_chan)); -@@ -2674,6 +2689,9 @@ static int bcm_enetsw_probe(struct platf +@@ -2675,6 +2690,9 @@ static int bcm_enetsw_probe(struct platf struct bcm63xx_enetsw_platform_data *pd; struct resource *res_mem; int ret, irq_rx, irq_tx; @@ -113,7 +113,7 @@ if (!bcm_enet_shared_base[0]) return -EPROBE_DEFER; -@@ -2754,6 +2772,43 @@ static int bcm_enetsw_probe(struct platf +@@ -2755,6 +2773,43 @@ static int bcm_enetsw_probe(struct platf priv->pdev = pdev; priv->net_dev = dev; @@ -157,7 +157,7 @@ return 0; out_disable_clk: -@@ -2775,6 +2830,9 @@ static int bcm_enetsw_remove(struct plat +@@ -2776,6 +2831,9 @@ static int bcm_enetsw_remove(struct plat priv = netdev_priv(dev); unregister_netdev(dev); diff --git a/target/linux/brcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch index f2b18b76d6..e956deac1a 100644 --- a/target/linux/brcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch +++ b/target/linux/brcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch @@ -1,6 +1,6 @@ --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -2733,9 +2733,9 @@ static int bcm_enetsw_probe(struct platf +@@ -2734,9 +2734,9 @@ static int bcm_enetsw_probe(struct platf if (ret) goto out; diff --git a/target/linux/brcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/brcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch index d9cf170dae..683221d76e 100644 --- a/target/linux/brcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch +++ b/target/linux/brcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch @@ -1,6 +1,6 @@ --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -2231,6 +2231,10 @@ static int bcm_enetsw_open(struct net_de +@@ -2232,6 +2232,10 @@ static int bcm_enetsw_open(struct net_de rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i)); rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN; diff --git a/target/linux/cns3xxx/patches-4.19/080-sata_support.patch b/target/linux/cns3xxx/patches-4.19/080-sata_support.patch index 20871916fb..65a5275bec 100644 --- a/target/linux/cns3xxx/patches-4.19/080-sata_support.patch +++ b/target/linux/cns3xxx/patches-4.19/080-sata_support.patch @@ -1,6 +1,6 @@ --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c -@@ -37,12 +37,23 @@ static struct scsi_host_template ahci_pl +@@ -44,11 +44,18 @@ static struct scsi_host_template ahci_pl AHCI_SHT(DRV_NAME), }; @@ -15,12 +15,26 @@ { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; -+ const struct ata_port_info *info = &ahci_port_info; +- const struct ata_port_info *port; ++ const struct ata_port_info *port = &ahci_port_info; int rc; -+ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX)) -+ info = &cns3xxx_port_info; -+ hpriv = ahci_platform_get_resources(pdev, - AHCI_PLATFORM_GET_RESETS); - if (IS_ERR(hpriv)) +@@ -66,9 +73,14 @@ static int ahci_probe(struct platform_de + if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) + hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ; + +- port = acpi_device_get_match_data(dev); +- if (!port) +- port = &ahci_port_info; ++ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX)) { ++ port = &cns3xxx_port_info; ++ } ++ else { ++ port = acpi_device_get_match_data(dev); ++ if (!port) ++ port = &ahci_port_info; ++ } + + rc = ahci_platform_init_host(pdev, hpriv, port, + &ahci_platform_sht); diff --git a/target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch b/target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch index 78b7cc9f3e..dcd9b187c3 100644 --- a/target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch +++ b/target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch @@ -506,7 +506,7 @@ Signed-off-by: Pablo Neira Ayuso +MODULE_ALIAS("nf-flow-table-hw"); --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c -@@ -5471,6 +5471,13 @@ static int nf_tables_flowtable_parse_hoo +@@ -5473,6 +5473,13 @@ static int nf_tables_flowtable_parse_hoo if (err < 0) return err; @@ -520,7 +520,7 @@ Signed-off-by: Pablo Neira Ayuso ops = kcalloc(n, sizeof(struct nf_hook_ops), GFP_KERNEL); if (!ops) return -ENOMEM; -@@ -5602,10 +5609,19 @@ static int nf_tables_newflowtable(struct +@@ -5604,10 +5611,19 @@ static int nf_tables_newflowtable(struct } flowtable->data.type = type; @@ -540,7 +540,7 @@ Signed-off-by: Pablo Neira Ayuso err = nf_tables_flowtable_parse_hook(&ctx, nla[NFTA_FLOWTABLE_HOOK], flowtable); if (err < 0) -@@ -5731,7 +5747,8 @@ static int nf_tables_fill_flowtable_info +@@ -5733,7 +5749,8 @@ static int nf_tables_fill_flowtable_info nla_put_string(skb, NFTA_FLOWTABLE_NAME, flowtable->name) || nla_put_be32(skb, NFTA_FLOWTABLE_USE, htonl(flowtable->use)) || nla_put_be64(skb, NFTA_FLOWTABLE_HANDLE, cpu_to_be64(flowtable->handle), diff --git a/target/linux/ipq40xx/patches-4.19/073-v4.20-ARM-dts-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch b/target/linux/ipq40xx/patches-4.19/073-v4.20-ARM-dts-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch deleted file mode 100644 index cd1370ea5e..0000000000 --- a/target/linux/ipq40xx/patches-4.19/073-v4.20-ARM-dts-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch +++ /dev/null @@ -1,34 +0,0 @@ -From bd73a3dd257fb838bd456a18eeee0ef0224b7a40 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Wed, 25 Jul 2018 10:37:47 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value - -while compiling an ipq4019 target, dtc will complain: -regulator@b089000 unit address format error, expected "2089000" - -The saw0 regulator reg value seems to be -copied and pasted from qcom-ipq8064.dtsi. - -This patch fixes the reg value to match that of the -unit address which in turn silences the warning. -(There is no driver for qcom,saw2 right now. -So this went unnoticed) - -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin -Signed-off-by: Andy Gross ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -325,7 +325,7 @@ - - saw0: regulator@b089000 { - compatible = "qcom,saw2"; -- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; -+ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; - diff --git a/target/linux/mediatek/patches-4.19/0101-pci-mediatek-backport-fix-pcie.patch b/target/linux/mediatek/patches-4.19/0101-pci-mediatek-backport-fix-pcie.patch index cdb53954cf..009eedb583 100644 --- a/target/linux/mediatek/patches-4.19/0101-pci-mediatek-backport-fix-pcie.patch +++ b/target/linux/mediatek/patches-4.19/0101-pci-mediatek-backport-fix-pcie.patch @@ -362,7 +362,7 @@ return err; } -@@ -1125,34 +1126,6 @@ static int mtk_pcie_request_resources(st +@@ -1127,34 +1128,6 @@ static int mtk_pcie_request_resources(st return 0; } @@ -397,7 +397,7 @@ static int mtk_pcie_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; -@@ -1179,7 +1152,14 @@ static int mtk_pcie_probe(struct platfor +@@ -1181,7 +1154,14 @@ static int mtk_pcie_probe(struct platfor if (err) goto put_resources; @@ -413,7 +413,7 @@ if (err) goto put_resources; -@@ -1192,6 +1172,80 @@ put_resources: +@@ -1194,6 +1174,80 @@ put_resources: return err; } @@ -494,7 +494,7 @@ static const struct mtk_pcie_soc mtk_pcie_soc_v1 = { .ops = &mtk_pcie_ops, .startup = mtk_pcie_startup_port, -@@ -1220,10 +1274,13 @@ static const struct of_device_id mtk_pci +@@ -1222,10 +1276,13 @@ static const struct of_device_id mtk_pci static struct platform_driver mtk_pcie_driver = { .probe = mtk_pcie_probe,