From: Petr Štetiar Date: Sun, 14 Apr 2019 20:59:00 +0000 (+0200) Subject: ath79: archer-x7-v5: sync ar8327 initial reg values with ar71xx X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e2c0a2cb953938df0b258258498c69b5bba13917;p=openwrt%2Fstaging%2Fneocturne.git ath79: archer-x7-v5: sync ar8327 initial reg values with ar71xx Simply dumped content of this regs in ar71xx and wrote them to DTS, as a result port 6 on the switch will appear disconnected as on Archer C7v4. [AS: testing and PORT6_STATUS fix] Signed-off-by: Adrian Schmutzler Signed-off-by: Petr Štetiar --- diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi index 5fcbf7390a..6e1d5d9b09 100644 --- a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi +++ b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi @@ -158,9 +158,12 @@ phy-mode = "sgmii"; qca,ar8327-initvals = < - 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ - 0x10 0x81000080 /* POWER_ON_STRIP */ + 0x04 0x80080080 /* PORT0 PAD MODE CTRL */ + 0x08 0x00000000 /* PORT5 PAD MODE CTRL */ + 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */ + 0x10 0x00000080 /* POWER_ON_STRIP */ 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x00000200 /* PORT6_STATUS */ >; }; };