From: Chris Pascoe Date: Sat, 24 Nov 2007 07:34:42 +0000 (-0300) Subject: V4L/DVB (12821): tm6000: update USB request names and clean up i2c routine X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e30b9d6c641dbd9687a5605b2151a2a83d2e8770;p=openwrt%2Fstaging%2Fblogic.git V4L/DVB (12821): tm6000: update USB request names and clean up i2c routine Update the descriptions of the USB request types so that they match what we now know they do. Rework the i2c_xfer function so that it is more explicit what sort of I2C transfers it is that the tm6000 can't perform. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/staging/tm6000/tm6000-i2c.c b/drivers/staging/tm6000/tm6000-i2c.c index 8569cfca8f82..12e2c98e5433 100644 --- a/drivers/staging/tm6000/tm6000-i2c.c +++ b/drivers/staging/tm6000/tm6000-i2c.c @@ -73,7 +73,7 @@ static int tm6000_i2c_scan(struct i2c_adapter *i2c_adap, int addr) /* This sends addr + 1 byte with 0 */ rc = tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, - REQ_16_SET_GET_I2CSEQ, + REQ_16_SET_GET_I2C_WR1_RDN, addr, 0, buf, 0); msleep(10); @@ -94,82 +94,61 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap, { struct tm6000_core *dev = i2c_adap->algo_data; int addr, rc, i, byte; - int prev_reg = -1; if (num <= 0) return 0; for (i = 0; i < num; i++) { - addr = (msgs[i].addr << 1) &0xff; + addr = (msgs[i].addr << 1) & 0xff; i2c_dprintk(2,"%s %s addr=0x%x len=%d:", (msgs[i].flags & I2C_M_RD) ? "read" : "write", i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len); if (!msgs[i].len) { /* Do I2C scan */ - rc=tm6000_i2c_scan(i2c_adap, addr); + rc = tm6000_i2c_scan(i2c_adap, addr); } else if (msgs[i].flags & I2C_M_RD) { - /* Read bytes */ - /* I2C is assumed to have always a subaddr at the first byte of the - message bus. Also, the first i2c value of the answer is returned - out of message data. - */ - /* SMBus Read Byte command */ - if (prev_reg < 0) - printk("XXX read from unknown prev_reg\n"); - rc = tm6000_read_write_usb (dev, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - REQ_16_SET_GET_I2CSEQ, - addr | (prev_reg << 8), 0, - msgs[i].buf, msgs[i].len); - if (prev_reg >= 0) - prev_reg += msgs[i].len; - if (i2c_debug>=2) { - for (byte = 0; byte < msgs[i].len; byte++) { + /* read request without preceding register selection */ + /* + * The TM6000 only supports a read transaction + * immediately after a 1 or 2 byte write to select + * a register. We cannot fulfil this request. + */ + i2c_dprintk(2, " read without preceding write not" + " supported"); + rc = -EOPNOTSUPP; + goto err; + } else if (i + 1 < num && msgs[i].len <= 2 && + (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* 1 or 2 byte write followed by a read */ + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) printk(" %02x", msgs[i].buf[byte]); - } - } - } else if (i+1 < num && msgs[i].len == 2 && - (msgs[i+1].flags & I2C_M_RD) && - msgs[i].addr == msgs[i+1].addr) { - i2c_dprintk(2, "msg %d: write 2, read %d", i, - msgs[i+1].len); - /* Write 2 Read N command */ + i2c_dprintk(2, "; joined to read %s len=%d:", + i == num - 2 ? "stop" : "nonstop", + msgs[i + 1].len); rc = tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - REQ_14_SET_GET_EEPROM_PAGE, /* XXX wrong name */ - addr | msgs[i].buf[0] << 8, msgs[i].buf[1], - msgs[i+1].buf, msgs[i+1].len); + msgs[i].len == 1 ? REQ_16_SET_GET_I2C_WR1_RDN + : REQ_14_SET_GET_I2C_WR2_RDN, + addr | msgs[i].buf[0] << 8, + msgs[i].len == 1 ? 0 : msgs[i].buf[1], + msgs[i + 1].buf, msgs[i + 1].len); i++; - if (i2c_debug>=2) { - for (byte = 0; byte < msgs[i].len; byte++) { + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) printk(" %02x", msgs[i].buf[byte]); - } - } - prev_reg = -1; } else { /* write bytes */ - if (i2c_debug>=2) { + if (i2c_debug >= 2) for (byte = 0; byte < msgs[i].len; byte++) printk(" %02x", msgs[i].buf[byte]); - } - - /* SMBus Write Byte command followed by a read command */ - if(msgs[i].len == 1 && i+1 < num && msgs[i+1].flags & I2C_M_RD - && msgs[i+1].addr == msgs[i].addr) { - prev_reg = msgs[i].buf[0]; - if (i2c_debug >= 2) - printk("\n"); - continue; - } - - rc = tm6000_read_write_usb (dev, + rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - REQ_16_SET_GET_I2CSEQ, - addr|(*msgs[i].buf)<<8, 0, - msgs[i].buf+1, msgs[i].len-1); - - prev_reg = -1; + REQ_16_SET_GET_I2C_WR1_RDN, + addr | msgs[i].buf[0] << 8, 0, + msgs[i].buf + 1, msgs[i].len - 1); } - if (i2c_debug>=2) + if (i2c_debug >= 2) printk("\n"); if (rc < 0) goto err; @@ -181,7 +160,6 @@ err: return rc; } - static int tm6000_i2c_eeprom(struct tm6000_core *dev, unsigned char *eedata, int len) { @@ -196,7 +174,7 @@ static int tm6000_i2c_eeprom(struct tm6000_core *dev, *p = i; rc = tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - REQ_16_SET_GET_I2CSEQ, 0xa0 | i<<8, 0, p, 1); + REQ_16_SET_GET_I2C_WR1_RDN, 0xa0 | i<<8, 0, p, 1); if (rc < 1) { if (p == eedata) goto noeeprom; @@ -273,7 +251,7 @@ static void dec_use(struct i2c_adapter *adap) #define mass_write(addr, reg, data...) \ { const static u8 _val[] = data; \ rc=tm6000_read_write_usb(dev,USB_DIR_OUT | USB_TYPE_VENDOR, \ - REQ_16_SET_GET_I2CSEQ,(reg<<8)+addr, 0x00, (u8 *) _val, \ + REQ_16_SET_GET_I2C_WR1_RDN,(reg<<8)+addr, 0x00, (u8 *) _val, \ ARRAY_SIZE(_val)); \ if (rc<0) { \ printk(KERN_ERR "Error on line %d: %d\n",__LINE__,rc); \ diff --git a/drivers/staging/tm6000/tm6000-regs.h b/drivers/staging/tm6000/tm6000-regs.h index 414852e69fce..9b6456e18426 100644 --- a/drivers/staging/tm6000/tm6000-regs.h +++ b/drivers/staging/tm6000/tm6000-regs.h @@ -38,11 +38,11 @@ #define REQ_11_SET_EEPROM_ADDR 11 #define REQ_12_SET_GET_EEPROMBYTE 12 #define REQ_13_GET_EEPROM_SEQREAD 13 -#define REQ_14_SET_GET_EEPROM_PAGE 14 +#define REQ_14_SET_GET_I2C_WR2_RDN 14 #define REQ_15_SET_GET_I2CBYTE 15 /* Write: Subaddr, Slave Addr, value, 0 */ /* Read : Subaddr, Slave Addr, value, 1 */ -#define REQ_16_SET_GET_I2CSEQ 16 +#define REQ_16_SET_GET_I2C_WR1_RDN 16 /* Subaddr, Slave Addr, 0, length */ #define REQ_17_SET_GET_I2CFP 17 /* Write: Slave Addr, register, value */