From: Laurent Pinchart Date: Sun, 10 Mar 2013 16:30:25 +0000 (+0100) Subject: sh-pfc: Configure pins as GPIOs at request time when handled externally X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e3c470510babd8ed385f1e09ec616787022b77b1;p=openwrt%2Fstaging%2Fblogic.git sh-pfc: Configure pins as GPIOs at request time when handled externally When a GPIO is handled by a separate driver the pinmux gpio_set_direction() handler won't be called. The pin mux type then need to be configured to GPIO at request time. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c index 97e6ea3147e0..ced9a95aa1fc 100644 --- a/drivers/pinctrl/sh-pfc/core.c +++ b/drivers/pinctrl/sh-pfc/core.c @@ -268,7 +268,7 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type) int ret; switch (pinmux_type) { - + case PINMUX_TYPE_GPIO: case PINMUX_TYPE_FUNCTION: range = NULL; break; @@ -297,6 +297,8 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type) enum_id = 0; field = 0; value = 0; + + /* Iterate over all the configuration fields we need to update. */ while (1) { pos = sh_pfc_mark_to_enum(pfc, mark, pos, &enum_id); if (pos < 0) @@ -305,18 +307,20 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type) if (!enum_id) break; - /* first check if this is a function enum */ + /* Check if the configuration field selects a function. If it + * doesn't, skip the field if it's not applicable to the + * requested pinmux type. + */ in_range = sh_pfc_enum_in_range(enum_id, &pfc->info->function); if (!in_range) { - /* not a function enum */ - if (range) { - /* - * other range exists, so this pin is - * a regular GPIO pin that now is being - * bound to a specific direction. - * - * for this case we only allow function enums - * and the enums that match the other range. + if (pinmux_type == PINMUX_TYPE_FUNCTION) { + /* Functions are allowed to modify all + * fields. + */ + in_range = 1; + } else if (pinmux_type != PINMUX_TYPE_GPIO) { + /* Input/output types can only modify fields + * that correspond to their respective ranges. */ in_range = sh_pfc_enum_in_range(enum_id, range); @@ -327,17 +331,8 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type) */ if (in_range && enum_id == range->force) continue; - } else { - /* - * no other range exists, so this pin - * must then be of the function type. - * - * allow function type pins to select - * any combination of function/in/out - * in their MARK lists. - */ - in_range = 1; } + /* GPIOs are only allowed to modify function fields. */ } if (!in_range) diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c index aef268bc17ba..3492ec9a33b7 100644 --- a/drivers/pinctrl/sh-pfc/pinctrl.c +++ b/drivers/pinctrl/sh-pfc/pinctrl.c @@ -182,6 +182,17 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev, goto done; } + if (!pfc->gpio) { + /* If GPIOs are handled externally the pin mux type need to be + * set to GPIO here. + */ + const struct sh_pfc_pin *pin = &pfc->info->pins[idx]; + + ret = sh_pfc_config_mux(pfc, pin->enum_id, PINMUX_TYPE_GPIO); + if (ret < 0) + goto done; + } + cfg->type = PINMUX_TYPE_GPIO; ret = 0;