From: Mathias Kresin Date: Mon, 26 Nov 2018 12:26:06 +0000 (+0100) Subject: ramips: improve BDCOM WAP2100-SK support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e4d9217fe5419364d2fe89e69c2e4f9f47fd30b6;p=openwrt%2Fstaging%2Flinusw.git ramips: improve BDCOM WAP2100-SK support Use the generic board detection instead of the target specific one as all recent additions are doing. Setup the USB led via devicetree (a58535771f11) and include the required driver by default. Merge the led userspace setting with an existing identical case. Use the wps led for boot status indication. Move the partitions into a partition table node (6031ab345df8) and drop needless labels. Drop misplaced cells properties (53624c1702e6). Cleanup the pinmux and only switch pins to gpio functions which a referenced as gpio in the dts. Match the maximum image size with the size of the firmware partition. Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 6d4bca8029..fb288de09b 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -56,6 +56,10 @@ asl26555-16M) ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0" set_wifi_led "asl26555:green:wlan" ;; +bdcom,wap2100-sk|\ +hiwifi,hc5861b) + set_wifi_led "$boardname:green:wlan2g" + ;; broadway) set_wifi_led "$boardname:red:wps_active" ;; @@ -172,9 +176,6 @@ hg255d) set_wifi_led "$boardname:green:wlan" ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2" ;; -hiwifi,hc5861b) - set_wifi_led "$boardname:green:wlan2g" - ;; hpm) ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" set_wifi_led "$boardname:green:wifi" @@ -369,10 +370,6 @@ vocore-16M) w502u) set_wifi_led "rt2800pci-phy0::radio" ;; -wap2100-sk) - set_usb_led "$boardname:green:usb" - set_wifi_led "$boardname:green:wlan2g" - ;; we1026-5g-16m) ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0" set_wifi_led "we1026-5g:green:wifi" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 12d7c86e2b..7bb1d32484 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -198,6 +198,7 @@ ramips_setup_interfaces() atp-52b|\ awm002-evb-4M|\ awm002-evb-8M|\ + bdcom,wap2100-sk|\ c20i|\ dir-645|\ gl-mt300a|\ @@ -224,7 +225,6 @@ ramips_setup_interfaces() ubnt-erx|\ ubnt-erx-sfp|\ ur-326n4g|\ - wap2100-sk|\ wrtnode|\ wrtnode2p | \ wrtnode2r | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index ba6a13b65b..5741cbd2ee 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -553,9 +553,6 @@ ramips_board_detect() { *"W502U") name="w502u" ;; - *"WAP2100-SK") - name="wap2100-sk" - ;; *"WCR-1166DS") name="wcr-1166ds" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index cb6e5c1b5a..e4ddc0eec4 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -31,6 +31,7 @@ platform_check_image() { awm002-evb-4M|\ awm002-evb-8M|\ bc2|\ + bdcom,wap2100-sk|\ bocco|\ broadway|\ c108|\ @@ -186,7 +187,6 @@ platform_check_image() { widora,neo-32m|\ mqmaker,witi-256m|\ mqmaker,witi-512m|\ - wap2100-sk|\ we1026-5g-16m|\ wizfi630a|\ wl-330n|\ diff --git a/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts b/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts index 7f9cbe74bd..62a87c8444 100644 --- a/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts +++ b/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts @@ -6,9 +6,14 @@ #include / { - compatible = "bdcom,bdcom-wap2100-sk", "ralink,mt7620a-soc"; + compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc"; model = "BDCOM WAP2100-SK"; + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + }; + chosen { bootargs = "console=ttyS0,115200"; }; @@ -19,9 +24,11 @@ usb { label = "wap2100-sk:green:usb"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; - wps { + led_power: wps { label = "wap2100-sk:green:wps"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; @@ -34,8 +41,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; wps { @@ -55,34 +60,37 @@ &spi0 { status = "okay"; - en25q128@0 { - #address-cells = <1>; - #size-cells = <1>; + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - firmware: partition@50000 { - label = "firmware"; - reg = <0x50000 0xf70000>; + partitions { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf70000>; + }; }; }; }; @@ -123,7 +131,7 @@ &pinctrl { state_default: pinctrl0 { default { - ralink,group = "wdt", "mdio", "spi refclk", "uartf", "wled"; + ralink,group = "spi refclk", "uartf", "wled"; ralink,function = "gpio"; }; }; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 5e3d37b5c8..bf04a75ea1 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -80,14 +80,13 @@ define Device/ArcherMR200 endef TARGET_DEVICES += ArcherMR200 -define Device/BDCOM-WAP2100-SK +define Device/bdcom_wap2100-sk DTS := BDCOM-WAP2100-SK - IMAGE_SIZE := $(ralink_default_fw_size_16M) - SUPPORTED_DEVICES += wap2100-sk + IMAGE_SIZE := 15808k DEVICE_TITLE := BDCOM WAP2100-SK (ZTE ZXECS EBG3130) - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport endef -TARGET_DEVICES += BDCOM-WAP2100-SK +TARGET_DEVICES += bdcom_wap2100-sk define Device/bocco DTS := BOCCO