From: Eric Anholt Date: Wed, 1 Jun 2016 19:05:33 +0000 (-0700) Subject: clk: bcm2835: Mark the VPU clock as critical X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e69fdcca836f0b81a2260b69429c8622a80ea891;p=openwrt%2Fstaging%2Fblogic.git clk: bcm2835: Mark the VPU clock as critical The VPU clock is also the clock for our AXI bus, so we really can't disable it. This might have happened during boot if, for example, uart1 (aux_uart clock) probed and was then disabled before the other consumers of the VPU clock had probed. Signed-off-by: Eric Anholt Acked-by: Martin Sperl Signed-off-by: Stephen Boyd --- diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 7a7970865c2d..d9db03cb3fd8 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -443,6 +443,8 @@ struct bcm2835_clock_data { /* Number of fractional bits in the divider */ u32 frac_bits; + u32 flags; + bool is_vpu_clock; bool is_mash_clock; }; @@ -1230,7 +1232,7 @@ static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman, init.parent_names = parents; init.num_parents = data->num_mux_parents; init.name = data->name; - init.flags = CLK_IGNORE_UNUSED; + init.flags = data->flags | CLK_IGNORE_UNUSED; if (data->is_vpu_clock) { init.ops = &bcm2835_vpu_clock_clk_ops; @@ -1649,6 +1651,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .div_reg = CM_VPUDIV, .int_bits = 12, .frac_bits = 8, + .flags = CLK_IS_CRITICAL, .is_vpu_clock = true), /* clocks with per parent mux */