From: David Bauer Date: Mon, 26 Oct 2020 20:59:47 +0000 (+0100) Subject: ipq40xx: enable RX hash / CTAG TX offloading for single-phy X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e73d866c6fc7dfad2fb7dd87345c90029bbda59d;p=openwrt%2Fstaging%2Fthess.git ipq40xx: enable RX hash / CTAG TX offloading for single-phy This re-enables offloading features disabled by commit 9da2b567605b ("ipq40xx: fix ethernet vlan double tagging"). Single-PHY devices use port-based VLANs on the switch, therefore no S-TAG magic is involved here. Re-enabling these features restores throughput back to 950 Mbit/s. Reported-by: Jannis Pinter Signed-off-by: David Bauer --- diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c index 50335b0d14..49ee31a1bd 100644 --- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c +++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c @@ -978,11 +978,20 @@ static int edma_axi_probe(struct platform_device *pdev) edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_TSO | NETIF_F_GRO; + if (of_property_read_bool(np, "qcom,single-phy") && edma_cinfo->num_gmac == 1) + edma_netdev[i]->features |= NETIF_F_HW_VLAN_CTAG_TX; + #ifdef CONFIG_RFS_ACCEL edma_netdev[i]->features |= NETIF_F_NTUPLE; edma_netdev[i]->hw_features |= NETIF_F_NTUPLE; edma_netdev[i]->vlan_features |= NETIF_F_NTUPLE; edma_netdev[i]->wanted_features |= NETIF_F_NTUPLE; + if (of_property_read_bool(np, "qcom,single-phy") && edma_cinfo->num_gmac == 1) { + edma_netdev[i]->features |= NETIF_F_RXHASH; + edma_netdev[i]->hw_features |= NETIF_F_RXHASH; + edma_netdev[i]->vlan_features |= NETIF_F_RXHASH; + edma_netdev[i]->wanted_features |= NETIF_F_RXHASH; + } #endif edma_set_ethtool_ops(edma_netdev[i]);