From: Rosen Penev Date: Mon, 16 Dec 2024 23:42:19 +0000 (-0800) Subject: lantiq: use nvmem for fritz 736x X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e85b1afe6e49b03fad13145a3fdd4cc7e45c27f7;p=openwrt%2Fopenwrt.git lantiq: use nvmem for fritz 736x Two use AR9287 and one AR9381. Both have different calibration sizes. Move differences out of wifi node to make it clearer what's what. qca,no-eeprom needs to stay for 7362sl as there's no nvmem equivalent for caldata_extract_reverse Signed-off-by: Rosen Penev Link: https://github.com/openwrt/openwrt/pull/17278 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts index cc15324b56..1b41405062 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts @@ -49,7 +49,7 @@ #size-cells = <1>; cal_urlader_985: cal@985 { - reg = <0x985 0x440>; + reg = <0x985 0x3d8>; }; macaddr_urlader_a91: macaddr@a91 { @@ -94,7 +94,7 @@ }; &wifi { - /delete-property/ qca,no-eeprom; + compatible = "pci168c,002e"; nvmem-cells = <&cal_urlader_985>; nvmem-cell-names = "calibration"; }; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts index cbe6c14c99..9301b049ca 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts @@ -49,6 +49,10 @@ #address-cells = <1>; #size-cells = <1>; + cal_urlader_985: cal@985 { + reg = <0x985 0x3d8>; + }; + macaddr_urlader_a91: macaddr@a91 { compatible = "mac-base"; reg = <0xa91 0x6>; @@ -89,3 +93,9 @@ &phy1 { reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; + +&wifi { + compatible = "pci168c,002e"; + nvmem-cells = <&cal_urlader_985>; + nvmem-cell-names = "calibration"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts index 7929bde6cf..e1334fa306 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts @@ -127,3 +127,8 @@ &phy1 { reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; + +&wifi { + compatible = "pci168c,0030"; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi index e7fc9a4f55..cc0c97da89 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi @@ -155,10 +155,8 @@ #address-cells = <2>; device_type = "pci"; - wifi: wifi@168c,002e { - compatible = "pci168c,002e"; + wifi: wifi@0,0 { reg = <0 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ }; }; }; diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 164e2d39ca..936181c693 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -19,9 +19,6 @@ case "$FIRMWARE" in avm,fritz3390) caldata_extract_reverse "urlader" 0x2546 0x440 ;; - avm,fritz7360sl) - caldata_extract "urlader" 0x985 0x1000 - ;; avm,fritz7412|\ avm,fritz7430) /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 5120 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") || \