From: Adam Jackson Date: Tue, 18 Sep 2012 14:58:48 +0000 (-0400) Subject: drm/dp: Update DPCD defines X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e89861dfa3ed0d8e9d184becf25aebea14e98372;p=openwrt%2Fstaging%2Fblogic.git drm/dp: Update DPCD defines Sources: DP, eDP, and DP interop specs, and a VESA slideshow about DP 1.2 for the MST bits. Tested-by: Takashi Iwai Signed-off-by: Adam Jackson Acked-by: Dave Airlie Reviewed-by: Paulo Zanoni Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 1744b18c06b3..f9888c3cb955 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -69,16 +69,30 @@ /* 10b = TMDS or HDMI */ /* 11b = Other */ # define DP_FORMAT_CONVERSION (1 << 3) +# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) #define DP_MAIN_LINK_CHANNEL_CODING 0x006 #define DP_DOWN_STREAM_PORT_COUNT 0x007 -#define DP_PORT_COUNT_MASK 0x0f -#define DP_OUI_SUPPORT (1 << 7) +# define DP_PORT_COUNT_MASK 0x0f +# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) +# define DP_OUI_SUPPORT (1 << 7) + +#define DP_I2C_SPEED_CAP 0x00c +# define DP_I2C_SPEED_1K 0x01 +# define DP_I2C_SPEED_5K 0x02 +# define DP_I2C_SPEED_10K 0x04 +# define DP_I2C_SPEED_100K 0x08 +# define DP_I2C_SPEED_400K 0x10 +# define DP_I2C_SPEED_1M 0x20 #define DP_EDP_CONFIGURATION_CAP 0x00d #define DP_TRAINING_AUX_RD_INTERVAL 0x00e +/* Multiple stream transport */ +#define DP_MSTM_CAP 0x021 +# define DP_MST_CAP (1 << 0) + #define DP_PSR_SUPPORT 0x070 # define DP_PSR_IS_SUPPORTED 1 #define DP_PSR_CAPS 0x071 @@ -93,6 +107,31 @@ # define DP_PSR_SETUP_TIME_MASK (7 << 1) # define DP_PSR_SETUP_TIME_SHIFT 1 +/* + * 0x80-0x8f describe downstream port capabilities, but there are two layouts + * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, + * each port's descriptor is one byte wide. If it was set, each port's is + * four bytes wide, starting with the one byte from the base info. As of + * DP interop v1.1a only VGA defines additional detail. + */ + +/* offset 0 */ +#define DP_DOWNSTREAM_PORT_0 0x80 +# define DP_DS_PORT_TYPE_MASK (7 << 0) +# define DP_DS_PORT_TYPE_DP 0 +# define DP_DS_PORT_TYPE_VGA 1 +# define DP_DS_PORT_TYPE_DVI 2 +# define DP_DS_PORT_TYPE_HDMI 3 +# define DP_DS_PORT_TYPE_NON_EDID 4 +# define DP_DS_PORT_HPD (1 << 3) +/* offset 1 for VGA is maximum megapixels per second / 8 */ +/* offset 2 */ +# define DP_DS_VGA_MAX_BPC_MASK (3 << 0) +# define DP_DS_VGA_8BPC 0 +# define DP_DS_VGA_10BPC 1 +# define DP_DS_VGA_12BPC 2 +# define DP_DS_VGA_16BPC 3 + /* link configuration */ #define DP_LINK_BW_SET 0x100 # define DP_LINK_BW_1_62 0x06 @@ -148,24 +187,37 @@ #define DP_DOWNSPREAD_CTRL 0x107 # define DP_SPREAD_AMP_0_5 (1 << 4) +# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) #define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 # define DP_SET_ANSI_8B10B (1 << 0) +#define DP_I2C_SPEED_CONTROL_STATUS 0x109 +/* bitmask as for DP_I2C_SPEED_CAP */ + +#define DP_EDP_CONFIGURATION_SET 0x10a + +#define DP_MSTM_CTRL 0x111 +# define DP_MST_EN (1 << 0) +# define DP_UP_REQ_EN (1 << 1) +# define DP_UPSTREAM_IS_SRC (1 << 2) + #define DP_PSR_EN_CFG 0x170 # define DP_PSR_ENABLE (1 << 0) # define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) # define DP_PSR_CRC_VERIFICATION (1 << 2) # define DP_PSR_FRAME_CAPTURE (1 << 3) +#define DP_SINK_COUNT 0x200 +# define DP_SINK_COUNT_MASK (31 << 0) +# define DP_SINK_CP_READY (1 << 6) + #define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201 # define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0) # define DP_AUTOMATED_TEST_REQUEST (1 << 1) # define DP_CP_IRQ (1 << 2) # define DP_SINK_SPECIFIC_IRQ (1 << 6) -#define DP_EDP_CONFIGURATION_SET 0x10a - #define DP_LANE0_1_STATUS 0x202 #define DP_LANE2_3_STATUS 0x203 # define DP_LANE_CR_DONE (1 << 0)