From: Jim Gill Date: Thu, 2 Aug 2018 21:13:30 +0000 (-0700) Subject: scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e95153b64d03c2b6e8d62e51bdcc33fcad6e0856;p=openwrt%2Fstaging%2Fblogic.git scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED Commands that are reset are returned with status SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK | SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte to DID_RESET to allow upper layers to retry. Tested by copying a large file between two pvscsi disks on same adapter while performing a bus reset at 1-second intervals. Before fix, commands sometimes fail with DID_OK. After fix, commands observed to fail with DID_RESET. Signed-off-by: Jim Gill Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 777e5f1e52d1..0cd947f78b5b 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -561,9 +561,14 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter, (btstat == BTSTAT_SUCCESS || btstat == BTSTAT_LINKED_COMMAND_COMPLETED || btstat == BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG)) { - cmd->result = (DID_OK << 16) | sdstat; - if (sdstat == SAM_STAT_CHECK_CONDITION && cmd->sense_buffer) - cmd->result |= (DRIVER_SENSE << 24); + if (sdstat == SAM_STAT_COMMAND_TERMINATED) { + cmd->result = (DID_RESET << 16); + } else { + cmd->result = (DID_OK << 16) | sdstat; + if (sdstat == SAM_STAT_CHECK_CONDITION && + cmd->sense_buffer) + cmd->result |= (DRIVER_SENSE << 24); + } } else switch (btstat) { case BTSTAT_SUCCESS: