From: Fabio Estevam Date: Wed, 26 Sep 2012 23:27:35 +0000 (-0300) Subject: ARM: dts: imx53-qsb: Use pinctrl for gpio-led X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=e9dc615c50fc6436741889b82380b4bde3765a87;p=openwrt%2Fstaging%2Fblogic.git ARM: dts: imx53-qsb: Use pinctrl for gpio-led Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.2: pins are not configured from the driver Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 08948af86d1a..5bae4c76979a 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -60,10 +60,16 @@ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + >; + }; + + led_pin_gpio7_7: led_gpio7_7@0 { + fsl,pins = < 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ >; }; }; + }; uart1: serial@53fbc000 { @@ -216,6 +222,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio7_7>; user { label = "Heartbeat";