From: Andrea Merello Date: Fri, 4 Oct 2019 13:53:32 +0000 (+0200) Subject: net: phy: allow for reset line to be tied to a sleepy GPIO controller X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ea977d19d918324ad5b66953f051a6ed07d0a3c5;p=openwrt%2Fstaging%2Fblogic.git net: phy: allow for reset line to be tied to a sleepy GPIO controller mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c index e282600bd83e..c1d345c3cab3 100644 --- a/drivers/net/phy/mdio_device.c +++ b/drivers/net/phy/mdio_device.c @@ -121,7 +121,7 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value) return; if (mdiodev->reset_gpio) - gpiod_set_value(mdiodev->reset_gpio, value); + gpiod_set_value_cansleep(mdiodev->reset_gpio, value); if (mdiodev->reset_ctrl) { if (value)