From: Hauke Mehrtens Date: Tue, 28 May 2019 17:21:16 +0000 (-0700) Subject: at91: Update kernel to version 4.14 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ed224b1880c6609a5c2a837ba23bb96081a433df;p=openwrt%2Fstaging%2Fthess.git at91: Update kernel to version 4.14 This adds support for kernel 4.14 to the target and directly make it the default kernel version to use. Signed-off-by: Hauke Mehrtens Tested-by: Sandeep Sheriker --- diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile index cae3c6278b..4dc70ebac1 100644 --- a/target/linux/at91/Makefile +++ b/target/linux/at91/Makefile @@ -13,7 +13,7 @@ BOARDNAME:=Microchip (Atmel AT91) FEATURES:=ext4 squashfs targz usb usbgadget ubifs SUBTARGETS:=sama5 legacy -KERNEL_PATCHVER:=4.9 +KERNEL_PATCHVER:=4.14 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/at91/config-4.14 b/target/linux/at91/config-4.14 new file mode 100644 index 0000000000..ca526b9d74 --- /dev/null +++ b/target/linux/at91/config-4.14 @@ -0,0 +1,568 @@ +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_AT91=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +CONFIG_ARM_AT91_CPUIDLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_HEAVY_MB=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_AT91_ADC=y +CONFIG_AT91_SAMA5D2_ADC=y +CONFIG_AT91_SOC_ID=y +CONFIG_ATMEL_AIC5_IRQ=y +CONFIG_ATMEL_EBI=y +CONFIG_ATMEL_PIT=y +CONFIG_ATMEL_PM=y +CONFIG_ATMEL_SDRAMC=y +CONFIG_ATMEL_SSC=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +CONFIG_ATMEL_TCLIB=y +CONFIG_AT_HDMAC=y +CONFIG_AT_XDMAC=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_BATTERY_ACT8945A=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_CACHE_L2X0=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMA=y +CONFIG_CMA_ALIGNMENT=8 +CONFIG_CMA_AREAS=7 +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_SIZE_MBYTES=16 +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_AT91=y +CONFIG_CONFIGFS_FS=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_COREDUMP=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y +CONFIG_CPU_SPECTRE=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRASH_CORE=y +CONFIG_CRASH_DUMP=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_CCM=y +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_GHASH=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_UART_8250 is not set +CONFIG_DEBUG_USER=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_DEFAULT_NOOP=y +CONFIG_DMADEVICES=y +CONFIG_DMA_CMA=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_SHARED_BUFFER=y +CONFIG_DNOTIFY=y +CONFIG_DRM=y +CONFIG_DRM_ATMEL_HLCDC=y +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_FBDEV_OVERALLOC=100 +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_PANEL=y +CONFIG_DRM_PANEL_BRIDGE=y +CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DTC=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EEPROM_AT24=y +CONFIG_ELF_CORE=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_EXT4_FS=y +CONFIG_FAT_FS=y +CONFIG_FB=y +# CONFIG_FB_ATMEL is not set +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_CMDLINE=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_SYS_IMAGEBLIT=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FORCE_MAX_ZONEORDER=15 +CONFIG_FREEZER=y +CONFIG_FS_MBCACHE=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GLOB=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_SYSFS=y +# CONFIG_GRO_CELLS is not set +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SMCCC=y +CONFIG_HAVE_AT91_AUDIO_PLL=y +CONFIG_HAVE_AT91_GENERATED_CLK=y +CONFIG_HAVE_AT91_H32MX=y +CONFIG_HAVE_AT91_SMD=y +CONFIG_HAVE_AT91_USB_CLK=y +CONFIG_HAVE_AT91_UTMI=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FB_ATMEL=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HDMI=y +CONFIG_HID=y +CONFIG_HID_GENERIC=y +CONFIG_HW_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_ATMEL=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_AT91=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_GPIO=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_IIO=y +CONFIG_IIO_BUFFER=y +CONFIG_IIO_KFIFO_BUF=y +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_TRIGGERED_BUFFER=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_IOMMU_HELPER=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_JBD2=y +# CONFIG_JFFS2_FS is not set +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_XZ is not set +CONFIG_KEXEC=y +CONFIG_KEXEC_CORE=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_QT1070=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y +CONFIG_LEDS_TRIGGER_CPU=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_LIBFDT=y +CONFIG_LOCALVERSION_AUTO=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACB=y +CONFIG_MACB_USE_HWSTAMP=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MANDATORY_FILE_LOCKING=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_MEMORY=y +CONFIG_MEMORY_ISOLATION=y +CONFIG_MFD_ACT8945A=y +CONFIG_MFD_ATMEL_FLEXCOM=y +CONFIG_MFD_ATMEL_HLCDC=y +CONFIG_MFD_ATMEL_SMC=y +CONFIG_MFD_CORE=y +CONFIG_MFD_SYSCON=y +CONFIG_MICREL_PHY=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_OF_AT91=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_BLOCK is not set +CONFIG_MTD_UBI_FASTMAP=y +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NEON=y +CONFIG_NLS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_NO_BOOTMEM=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PARTITION_ADVANCED is not set +# CONFIG_PCI_DOMAINS_GENERIC is not set +# CONFIG_PCI_SYSCALL is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_PINCTRL_AT91PIO4=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_PM=y +CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_PM_CLK=y +CONFIG_PM_DEBUG=y +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_AT91_POWEROFF=y +CONFIG_POWER_RESET_AT91_RESET=y +CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y +CONFIG_POWER_SUPPLY=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PRINTK_TIME=y +CONFIG_PROC_VMCORE=y +CONFIG_PWM=y +CONFIG_PWM_ATMEL=y +CONFIG_PWM_ATMEL_HLCDC_PWM=y +CONFIG_PWM_ATMEL_TCB=y +CONFIG_PWM_SYSFS=y +CONFIG_RATIONAL=y +# CONFIG_RCU_NEED_SEGCBLIST is not set +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_ACT8865=y +CONFIG_REGULATOR_ACT8945A=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_RTC_DRV_AT91SAM9 is not set +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SAMA5D4_WATCHDOG=y +# CONFIG_SCHED_INFO is not set +CONFIG_SCSI=y +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SG_POOL=y +CONFIG_SND=y +CONFIG_SND_ARM=y +# CONFIG_SND_AT73C213 is not set +# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set +# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set +CONFIG_SND_ATMEL_SOC=y +CONFIG_SND_ATMEL_SOC_CLASSD=y +CONFIG_SND_ATMEL_SOC_DMA=y +# CONFIG_SND_ATMEL_SOC_PDMIC is not set +CONFIG_SND_ATMEL_SOC_SSC=y +CONFIG_SND_ATMEL_SOC_SSC_DMA=y +# CONFIG_SND_ATMEL_SOC_TSE850_PCM5142 is not set +CONFIG_SND_ATMEL_SOC_WM8904=y +# CONFIG_SND_COMPRESS_OFFLOAD is not set +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +CONFIG_SND_PCM=y +CONFIG_SND_PCM_TIMER=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_WM8904=y +CONFIG_SND_SPI=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_TIMER=y +CONFIG_SOC_BUS=y +CONFIG_SOC_SAMA5=y +CONFIG_SOC_SAMA5D2=y +CONFIG_SOC_SAMA5D3=y +CONFIG_SOC_SAMA5D4=y +CONFIG_SOC_SAM_V7=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_ATMEL_QUADSPI=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +# CONFIG_SQUASHFS is not set +CONFIG_SRAM=y +CONFIG_SRAM_EXEC=y +CONFIG_SRCU=y +# CONFIG_STANDALONE is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_SWIOTLB=y +CONFIG_SWPHY=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SYNC_FILE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TINY_SRCU=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB=y +CONFIG_USB_ACM=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +# CONFIG_USB_AT91 is not set +# CONFIG_USB_ATMEL_USBA is not set +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_AT91=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_GADGET=y +CONFIG_USB_HID=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_AT91=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +# CONFIG_USB_PWC is not set +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_VFAT_FS=y +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_VIDEOMODE_HELPERS=y +# CONFIG_VIDEO_ATMEL_ISI is not set +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_WATCHDOG_CORE=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/at91/config-4.9 b/target/linux/at91/config-4.9 deleted file mode 100644 index ad18d6b826..0000000000 --- a/target/linux/at91/config-4.9 +++ /dev/null @@ -1,543 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_AT91=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_AT91_CPUIDLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_AT91_ADC=y -CONFIG_AT91_SAMA5D2_ADC=y -CONFIG_ATMEL_AIC5_IRQ=y -CONFIG_ATMEL_EBI=y -CONFIG_ATMEL_PIT=y -CONFIG_ATMEL_SDRAMC=y -CONFIG_ATMEL_SSC=y -CONFIG_ATMEL_TCB_CLKSRC=y -CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 -CONFIG_ATMEL_TCLIB=y -CONFIG_AT_HDMAC=y -CONFIG_AT_XDMAC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_BATTERY_ACT8945A=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_SD=y -CONFIG_CACHE_L2X0=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_OF=y -CONFIG_CLKSRC_PROBE=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMA=y -CONFIG_CMA_ALIGNMENT=8 -CONFIG_CMA_AREAS=7 -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_SIZE_MBYTES=16 -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_AT91=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRASH_DUMP=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_CCM=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_UART_8250 is not set -CONFIG_DEBUG_USER=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_DEFAULT_NOOP=y -CONFIG_DMADEVICES=y -CONFIG_DMA_CMA=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DNOTIFY=y -CONFIG_DRM=y -CONFIG_DRM_ATMEL_HLCDC=y -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_KMS_HELPER=y -CONFIG_DRM_PANEL=y -CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_ELF_CORE=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_EXT4_FS=y -CONFIG_FAT_FS=y -CONFIG_FB=y -# CONFIG_FB_ATMEL is not set -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_SYS_IMAGEBLIT=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FORCE_MAX_ZONEORDER=15 -CONFIG_FREEZER=y -CONFIG_FS_MBCACHE=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_HAVE_AT91_GENERATED_CLK=y -CONFIG_HAVE_AT91_H32MX=y -CONFIG_HAVE_AT91_SMD=y -CONFIG_HAVE_AT91_USB_CLK=y -CONFIG_HAVE_AT91_UTMI=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FB_ATMEL=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HDMI=y -CONFIG_HID=y -CONFIG_HID_GENERIC=y -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_ATMEL=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_AT91=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_GPIO=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_IIO=y -CONFIG_IIO_BUFFER=y -CONFIG_IIO_KFIFO_BUF=y -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_TRIGGERED_BUFFER=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IOMMU_HELPER=y -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -# CONFIG_JFFS2_FS is not set -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_XZ is not set -CONFIG_KEXEC=y -CONFIG_KEXEC_CORE=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_QT1070=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_PWM=y -CONFIG_LEDS_TRIGGER_CPU=y -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=4 -CONFIG_LIBFDT=y -CONFIG_LOCALVERSION_AUTO=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACB=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MANDATORY_FILE_LOCKING=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_USB_SUPPORT=y -CONFIG_MEMORY=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_MFD_ACT8945A=y -CONFIG_MFD_ATMEL_FLEXCOM=y -CONFIG_MFD_ATMEL_HLCDC=y -CONFIG_MFD_CORE=y -CONFIG_MFD_SYSCON=y -CONFIG_MICREL_PHY=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_OF_AT91=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_PHYSMAP_OF is not set -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_BLOCK is not set -CONFIG_MTD_UBI_FASTMAP=y -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NEON=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCI_DOMAINS_GENERIC is not set -# CONFIG_PCI_SYSCALL is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_AT91=y -CONFIG_PINCTRL_AT91PIO4=y -# CONFIG_PINCTRL_SINGLE is not set -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PM=y -CONFIG_PM_ADVANCED_DEBUG=y -CONFIG_PM_CLK=y -CONFIG_PM_DEBUG=y -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_AT91_POWEROFF=y -CONFIG_POWER_RESET_AT91_RESET=y -CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y -CONFIG_POWER_SUPPLY=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_PRINTK_TIME=y -CONFIG_PROC_VMCORE=y -CONFIG_PWM=y -CONFIG_PWM_ATMEL=y -CONFIG_PWM_ATMEL_HLCDC_PWM=y -CONFIG_PWM_ATMEL_TCB=y -CONFIG_PWM_SYSFS=y -CONFIG_RATIONAL=y -# CONFIG_RCU_STALL_COMMON is not set -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_ACT8865=y -CONFIG_REGULATOR_ACT8945A=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RFKILL_REGULATOR=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -# CONFIG_RTC_DRV_AT91SAM9 is not set -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SAMA5D4_WATCHDOG=y -# CONFIG_SCHED_INFO is not set -CONFIG_SCSI=y -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_SERIAL_ATMEL_PDC=y -# CONFIG_SERIAL_ATMEL_TTYAT is not set -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SG_POOL=y -CONFIG_SND=y -CONFIG_SND_ARM=y -# CONFIG_SND_AT73C213 is not set -# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set -# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set -CONFIG_SND_ATMEL_SOC=y -CONFIG_SND_ATMEL_SOC_CLASSD=y -CONFIG_SND_ATMEL_SOC_DMA=y -# CONFIG_SND_ATMEL_SOC_PDMIC is not set -CONFIG_SND_ATMEL_SOC_SSC=y -CONFIG_SND_ATMEL_SOC_SSC_DMA=y -CONFIG_SND_ATMEL_SOC_WM8904=y -# CONFIG_SND_COMPRESS_OFFLOAD is not set -CONFIG_SND_DMAENGINE_PCM=y -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_PCM=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_I2C_AND_SPI=y -CONFIG_SND_SOC_WM8904=y -CONFIG_SND_SPI=y -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_TIMER=y -CONFIG_SOC_BUS=y -CONFIG_SOC_SAMA5=y -CONFIG_SOC_SAMA5D2=y -CONFIG_SOC_SAMA5D3=y -CONFIG_SOC_SAMA5D4=y -CONFIG_SOC_SAM_V7=y -CONFIG_SOUND=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_ATMEL_QUADSPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -# CONFIG_SQUASHFS is not set -CONFIG_SRAM=y -CONFIG_SRCU=y -# CONFIG_STANDALONE is not set -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -# CONFIG_SWP_EMULATE is not set -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TOUCHSCREEN_ATMEL_MXT=y -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_UACCESS_WITH_MEMCPY=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_ACM=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_AT91 is not set -# CONFIG_USB_ATMEL_USBA is not set -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_AT91=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_GADGET=y -CONFIG_USB_HID=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_AT91=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -# CONFIG_USB_PWC is not set -CONFIG_USB_SERIAL=y -# CONFIG_USB_SERIAL_CONSOLE is not set -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_PL2303=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFAT_FS=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VIDEOMODE_HELPERS=y -# CONFIG_VIDEO_CPIA2 is not set -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_WATCHDOG_CORE=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/at91/legacy/config-default b/target/linux/at91/legacy/config-default index 4f73051f1c..a8923a6efe 100644 --- a/target/linux/at91/legacy/config-default +++ b/target/linux/at91/legacy/config-default @@ -3,6 +3,7 @@ CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V4_V5=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set +# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set # CONFIG_ARM_AT91_CPUIDLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_AT91RM9200_WATCHDOG is not set diff --git a/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch new file mode 100644 index 0000000000..c0eb6dafb2 --- /dev/null +++ b/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -33,6 +33,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ + usb_a9g20.dtb \ + usb_a9g20_lpw.dtb \ + at91sam9m10g45ek.dtb \ ++ lmu5000.dtb \ + pm9g45.dtb \ + at91sam9n12ek.dtb \ + at91sam9rlek.dtb \ diff --git a/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch new file mode 100644 index 0000000000..6c84c9401b --- /dev/null +++ b/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ + at91-ariettag25.dtb \ + at91-cosino_mega2560.dtb \ + at91-kizboxmini.dtb \ ++ at91-q5xr5.dtb \ + at91sam9g15ek.dtb \ + at91sam9g25ek.dtb \ + at91sam9g35ek.dtb \ diff --git a/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch b/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch new file mode 100644 index 0000000000..f6190c4959 --- /dev/null +++ b/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch @@ -0,0 +1,12 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -46,7 +46,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ + at91sam9g25ek.dtb \ + at91sam9g35ek.dtb \ + at91sam9x25ek.dtb \ +- at91sam9x35ek.dtb ++ at91sam9x35ek.dtb \ ++ wb45n.dtb + dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-kizbox2.dtb \ + at91-sama5d27_som1_ek.dtb \ diff --git a/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch b/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch new file mode 100644 index 0000000000..324017c517 --- /dev/null +++ b/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch @@ -0,0 +1,12 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -63,7 +63,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-sama5d4_ma5d4evk.dtb \ + at91-sama5d4_xplained.dtb \ + at91-sama5d4ek.dtb \ +- at91-vinco.dtb ++ at91-vinco.dtb \ ++ wb50n.dtb + dtb-$(CONFIG_ARCH_ATLAS6) += \ + atlas6-evb.dtb + dtb-$(CONFIG_ARCH_ATLAS7) += \ diff --git a/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch b/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch new file mode 100644 index 0000000000..b3bede41dc --- /dev/null +++ b/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch @@ -0,0 +1,434 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -50,6 +50,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ + wb45n.dtb + dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-kizbox2.dtb \ ++ at91-sama5d2_ptc_ek.dtb \ + at91-sama5d27_som1_ek.dtb \ + at91-sama5d2_xplained.dtb \ + at91-sama5d3_xplained.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +@@ -0,0 +1,421 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR X11) ++/* ++ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board ++ * ++ * Copyright (C) 2017 Microchip/Atmel, ++ * 2017 Wenyou Yang ++ * 2017 Ludovic Desroches ++ */ ++/dts-v1/; ++#include "sama5d2.dtsi" ++#include "sama5d2-pinfunc.h" ++#include ++#include ++#include ++ ++/ { ++ model = "Atmel SAMA5D2 PTC EK"; ++ compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; ++ ++ aliases { ++ serial0 = &uart0; ++ i2c0 = &i2c0; ++ i2c1 = &i2c1; ++ i2c2 = &i2c2; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory { ++ reg = <0x20000000 0x80000>; ++ }; ++ ++ clocks { ++ slow_xtal { ++ clock-frequency = <32768>; ++ }; ++ ++ main_xtal { ++ clock-frequency = <24000000>; ++ }; ++ }; ++ ++ ahb { ++ usb0: gadget@00300000 { ++ atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usba_vbus>; ++ status = "okay"; ++ }; ++ ++ usb1: ohci@00400000 { ++ num-ports = <3>; ++ atmel,vbus-gpio = <0 ++ &pioA PIN_PB12 GPIO_ACTIVE_HIGH ++ 0 ++ >; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usb_default>; ++ status = "okay"; ++ }; ++ ++ usb2: ehci@00500000 { ++ status = "okay"; ++ }; ++ ++ nand0: nand@80000000 { ++ nand-bus-width = <8>; ++ nand-ecc-mode = "hw"; ++ nand-on-flash-bbt; ++ atmel,has-pmecc; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_nand_default>; ++ status = "okay"; /* conflicts with sdmmc1 and qspi0 */ ++ ++ at91bootstrap@0 { ++ label = "bootstrap"; ++ reg = <0x0 0x40000>; ++ }; ++ ++ bootloader@40000 { ++ label = "bootloader"; ++ reg = <0x40000 0xc0000>; ++ }; ++ ++ bootloaderenv@0x100000 { ++ label = "bootloader env"; ++ reg = <0x100000 0x40000>; ++ }; ++ ++ bootloaderenvred@0x140000 { ++ label = "bootloader env redundant"; ++ reg = <0x140000 0x40000>; ++ }; ++ ++ dtb@180000 { ++ label = "device tree"; ++ reg = <0x180000 0x80000>; ++ }; ++ ++ kernel@200000 { ++ label = "kernel"; ++ reg = <0x200000 0x600000>; ++ }; ++ ++ rootfs@800000 { ++ label = "rootfs"; ++ reg = <0x800000 0x1f800000>; ++ }; ++ }; ++ ++ sdmmc0: sdio-host@a0000000 { ++ bus-width = <8>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_sdmmc0_default>; ++ status = "okay"; ++ }; ++ ++ apb { ++ pmc: pmc@f0014000 { ++ pmc_fast_restart { ++ compatible = "atmel,sama5d2-pmc-fast-startup"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ atmel,wakeup-rtc-timer; ++ ++ wkpin: input@0 { ++ reg = <0>; ++ }; ++ ++ gmac_wol: input@10 { ++ reg = <10>; ++ atmel,wakeup-active-high; ++ }; ++ }; ++ }; ++ ++ spi0: spi@f8000000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_spi0_default>; ++ status = "okay"; ++ ++ /* ++ m25p80@0 { ++ compatible = "atmel,at25df321a"; ++ reg = <0>; ++ spi-max-frequency = <50000000>; ++ }; ++ */ ++ }; ++ ++ macb0: ethernet@f8008000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; ++ phy-mode = "rmii"; ++ status = "okay"; ++ ++ ethernet-phy@1 { ++ reg = <0x1>; ++ interrupt-parent = <&pioA>; ++ interrupts = <56 IRQ_TYPE_LEVEL_LOW>; ++ }; ++ }; ++ ++ uart0: serial@f801c000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart0_default>; ++ atmel,use-dma-rx; ++ atmel,use-dma-tx; ++ status = "okay"; ++ }; ++ ++ uart2: serial@f8024000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2_default>; ++ atmel,use-dma-rx; ++ atmel,use-dma-tx; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@f8028000 { ++ dmas = <0>, <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c0_default>; ++ i2c-sda-hold-time-ns = <350>; ++ status = "okay"; ++ }; ++ ++ flx0: flexcom@f8034000 { ++ atmel,flexcom-mode = ; ++ status = "okay"; ++ ++ i2c2: i2c@600 { ++ compatible = "atmel,sama5d2-i2c"; ++ reg = <0x600 0x200>; ++ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; ++ dmas = <0>, <0>; ++ dma-names = "tx", "rx"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ clocks = <&flx0_clk>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_flx0_default>; ++ atmel,fifo-size = <16>; ++ status = "okay"; ++ }; ++ }; ++ ++ shdwc@f8048010 { ++ atmel,shdwc-debouncer = <976>; ++ ++ input@0 { ++ reg = <0>; ++ atmel,wakeup-type = "low"; ++ }; ++ }; ++ ++ watchdog@f8048040 { ++ status = "okay"; ++ }; ++ ++ spi1: spi@fc000000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_spi1_default>; ++ status = "okay"; ++ }; ++ ++ i2c1: i2c@fc028000 { ++ dmas = <0>, <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1_default>; ++ status = "okay"; ++ ++ at24@50 { ++ compatible = "24c02"; ++ reg = <0x50>; ++ pagesize = <8>; ++ }; ++ }; ++ ++ pinctrl@fc038000 { ++ pinctrl_flx0_default: flx0_default { ++ pinmux = , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_i2c0_default: i2c0_default { ++ pinmux = , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_i2c1_default: i2c1_default { ++ pinmux = , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_key_gpio_default: key_gpio_default { ++ pinmux = ; ++ bias-pull-up; ++ }; ++ ++ pinctrl_led_gpio_default: led_gpio_default { ++ pinmux = , ++ , ++ ; ++ bias-pull-up; ++ }; ++ ++ pinctrl_macb0_default: macb0_default { ++ pinmux = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_macb0_phy_irq: macb0_phy_irq { ++ pinmux = ; ++ bias-disable; ++ }; ++ ++ pinctrl_nand_default: nand_default { ++ re_we_data { ++ pinmux = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ bias-pull-up; ++ }; ++ ++ ale_cle_rdy_cs { ++ pinmux = , ++ , ++ , ++ ; ++ bias-pull-up; ++ }; ++ }; ++ ++ pinctrl_sdmmc0_default: sdmmc0_default { ++ cmd_data { ++ pinmux = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ bias-pull-up; ++ }; ++ ++ ck_cd_vddsel { ++ pinmux = , ++ , ++ ; ++ bias-disable; ++ }; ++ }; ++ ++ pinctrl_spi0_default: spi0_default { ++ pinmux = , ++ , ++ , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_spi1_default: spi1_default { ++ pinmux = , ++ , ++ , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_uart0_default: uart0_default { ++ pinmux = , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_uart2_default: uart2_default { ++ pinmux = , ++ ; ++ bias-disable; ++ }; ++ ++ pinctrl_usb_default: usb_default { ++ pinmux = ; ++ bias-disable; ++ }; ++ ++ pinctrl_usba_vbus: usba_vbus { ++ pinmux = ; ++ bias-disable; ++ }; ++ ++ }; ++ ++ ptc@fc060000 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_key_gpio_default>; ++ ++ bp1 { ++ label = "PB_USER"; ++ gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; ++ linux,code = <0x104>; ++ wakeup-source; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_led_gpio_default>; ++ status = "okay"; ++ ++ red { ++ label = "red"; ++ gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ green { ++ label = "green"; ++ gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ blue { ++ label = "blue"; ++ gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++}; diff --git a/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch deleted file mode 100644 index 2a64fb8a5c..0000000000 --- a/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -32,6 +32,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - usb_a9g20.dtb \ - usb_a9g20_lpw.dtb \ - at91sam9m10g45ek.dtb \ -+ lmu5000.dtb \ - pm9g45.dtb \ - at91sam9n12ek.dtb \ - at91sam9rlek.dtb \ diff --git a/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch deleted file mode 100644 index 1cee5588a0..0000000000 --- a/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - at91-ariettag25.dtb \ - at91-cosino_mega2560.dtb \ - at91-kizboxmini.dtb \ -+ at91-q5xr5.dtb \ - at91sam9g15ek.dtb \ - at91sam9g25ek.dtb \ - at91sam9g35ek.dtb \ diff --git a/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch b/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch deleted file mode 100644 index aeb523a5b9..0000000000 --- a/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -45,7 +45,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - at91sam9g25ek.dtb \ - at91sam9g35ek.dtb \ - at91sam9x25ek.dtb \ -- at91sam9x35ek.dtb -+ at91sam9x35ek.dtb \ -+ wb45n.dtb - dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-kizbox2.dtb \ - at91-sama5d2_xplained.dtb \ diff --git a/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch b/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch deleted file mode 100644 index a30a803c98..0000000000 --- a/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -59,7 +59,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-sama5d4_ma5d4evk.dtb \ - at91-sama5d4_xplained.dtb \ - at91-sama5d4ek.dtb \ -- at91-vinco.dtb -+ at91-vinco.dtb \ -+ wb50n.dtb - dtb-$(CONFIG_ARCH_ATLAS6) += \ - atlas6-evb.dtb - dtb-$(CONFIG_ARCH_ATLAS7) += \ diff --git a/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch b/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch deleted file mode 100644 index 20c69f39ed..0000000000 --- a/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch +++ /dev/null @@ -1,893 +0,0 @@ ---- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt -+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt -@@ -35,7 +35,12 @@ right representation of the pin. - Optional properties: - - GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable, - bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable, --input-debounce, output-low, output-high. -+input-debounce, output-low, output-high, drive-strength. -+ -+Concerning the drive-strength property, the values accepted are -+ATMEL_PIO_DRVSTR_LO, ATMEL_PIO_DRVSTR_ME, ATMEL_PIO_DRVSTR_HI. The current -+depends on VDDIOP. You can find the details in the DC Characteristics table -+from the datasheet. - - Example: - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - wb45n.dtb - dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-kizbox2.dtb \ -+ at91-sama5d27_som1_ek.dtb \ - at91-sama5d2_xplained.dtb \ - at91-sama5d3_xplained.dtb \ - sama5d31ek.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi -@@ -0,0 +1,175 @@ -+/* -+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board -+ * -+ * Copyright (c) 2017, Microchip Technology Inc. -+ * 2017 Cristian Birsan -+ * 2017 Claudiu Beznea -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+#include "sama5d2.dtsi" -+#include "sama5d2-pinfunc.h" -+ -+/ { -+ model = "Atmel SAMA5D27 SoM1"; -+ compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; -+ -+ clocks { -+ slow_xtal { -+ clock-frequency = <32768>; -+ }; -+ -+ main_xtal { -+ clock-frequency = <24000000>; -+ }; -+ }; -+ -+ ahb { -+ apb { -+ qspi1: spi@f0024000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_qspi1_default>; -+ -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <80000000>; -+ m25p,fast-read; -+ -+ at91bootstrap@00000000 { -+ label = "at91bootstrap"; -+ reg = <0x00000000 0x00010000>; -+ }; -+ -+ bootloader@00010000 { -+ label = "bootloader"; -+ reg = <0x00010000 0x000a0000>; -+ }; -+ -+ bootloaderenv@000b0000 { -+ label = "bootloader env"; -+ reg = <0x000b0000 0x00010000>; -+ }; -+ -+ dtb@000c0000 { -+ label = "device tree"; -+ reg = <0x000c0000 0x0020000>; -+ }; -+ -+ kernel@000e0000 { -+ label = "kernel"; -+ reg = <0x000e0000 0x0400000>; -+ }; -+ }; -+ }; -+ -+ macb0: ethernet@f8008000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_macb0_default>; -+ phy-mode = "rmii"; -+ -+ ethernet-phy@0 { -+ reg = <0x0>; -+ interrupt-parent = <&pioA>; -+ interrupts = ; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_macb0_phy_irq>; -+ }; -+ }; -+ -+ i2c0: i2c@f8028000 { -+ dmas = <0>, <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c0_default>; -+ status = "okay"; -+ -+ at24@50 { -+ compatible = "24c02"; -+ reg = <0x50>; -+ pagesize = <8>; -+ }; -+ }; -+ -+ pinctrl@fc038000 { -+ pinctrl_i2c0_default: i2c0_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_qspi1_default: qspi1_default { -+ sck_cs { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ data { -+ pinmux = , -+ , -+ , -+ ; -+ bias-pull-up; -+ }; -+ }; -+ -+ pinctrl_macb0_default: macb0_default { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_macb0_phy_irq: macb0_phy_irq { -+ pinmux = ; -+ bias-disable; -+ }; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts -@@ -0,0 +1,53 @@ -+/* -+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board -+ * -+ * Copyright (c) 2017, Microchip Technology Inc. -+ * 2016 Nicolas Ferre -+ * 2017 Cristian Birsan -+ * 2017 Claudiu Beznea -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+/dts-v1/; -+#include "at91-sama5d27_som1_ek_common.dtsi" -+ -+/ { -+ model = "Atmel SAMA5D27 SOM1 EK"; -+ compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek_common.dtsi -@@ -0,0 +1,619 @@ -+/* -+ * at91-sama5d27_som1_ek_common.dtsi - Device Tree file for SAMA5D27-SOM1-EK board -+ * -+ * Copyright (c) 2017, Microchip Technology Inc. -+ * 2016 Nicolas Ferre -+ * 2017 Cristian Birsan -+ * 2017 Claudiu Beznea -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+#include "at91-sama5d27_som1.dtsi" -+#include -+#include -+#include -+ -+/ { -+ model = "Atmel SAMA5D27 SOM1 EK"; -+ compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; -+ -+ aliases { -+ serial0 = &uart1; /* DBGU */ -+ serial1 = &uart4; /* mikro BUS 1 */ -+ serial2 = &uart2; /* mikro BUS 2 */ -+ i2c1 = &i2c1; -+ i2c2 = &i2c2; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ ahb { -+ usb0: gadget@00300000 { -+ atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usba_vbus>; -+ status = "okay"; -+ }; -+ -+ usb1: ohci@00400000 { -+ num-ports = <3>; -+ atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ -+ &pioA PIN_PA27 GPIO_ACTIVE_HIGH -+ 0 -+ >; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usb_default>; -+ status = "okay"; -+ }; -+ -+ usb2: ehci@00500000 { -+ status = "okay"; -+ }; -+ -+ sdmmc0: sdio-host@a0000000 { -+ bus-width = <8>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_sdmmc0_default>; -+ status = "okay"; -+ }; -+ -+ sdmmc1: sdio-host@b0000000 { -+ bus-width = <4>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_sdmmc1_default>; -+ status = "okay"; -+ }; -+ -+ apb { -+ hlcdc: hlcdc@f0000000 { -+ status = "disabled"; -+ -+ hlcdc-display-controller { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb>; -+ }; -+ -+ hlcdc_pwm: hlcdc-pwm { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_lcd_pwm>; -+ }; -+ }; -+ -+ pmc: pmc@f0014000 { -+ pmc_fast_restart { -+ compatible = "atmel,sama5d2-pmc-fast-startup"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ atmel,wakeup-rtc-timer; -+ -+ wkpin: input@0 { -+ reg = <0>; -+ }; -+ -+ gmac_wol: input@10 { -+ reg = <10>; -+ atmel,wakeup-active-high; -+ }; -+ }; -+ }; -+ -+ isc: isc@f0008000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>; -+ status = "okay"; -+ }; -+ -+ qspi1: spi@f0024000 { -+ status = "okay"; -+ }; -+ -+ spi0: spi@f8000000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_spi0_default>; -+ status = "okay"; -+ }; -+ -+ macb0: ethernet@f8008000 { -+ status = "okay"; -+ }; -+ -+ uart1: serial@f8020000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1_default>; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "okay"; -+ }; -+ -+ uart2: serial@f8024000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mikrobus2_uart>; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "okay"; -+ }; -+ -+ pwm0: pwm@f802c000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>; -+ status = "disabled"; /* Conflict with leds. */ -+ }; -+ -+ flx1: flexcom@f8038000 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ i2c2: i2c@600 { -+ compatible = "atmel,sama5d2-i2c"; -+ reg = <0x600 0x200>; -+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; -+ dmas = <0>, <0>; -+ dma-names = "tx", "rx"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&flx1_clk>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mikrobus_i2c>; -+ atmel,fifo-size = <16>; -+ status = "okay"; -+ }; -+ }; -+ -+ shdwc@f8048010 { -+ atmel,shdwc-debouncer = <976>; -+ atmel,wakeup-rtc-timer; -+ -+ input@0 { -+ reg = <0>; -+ atmel,wakeup-type = "low"; -+ }; -+ }; -+ -+ watchdog@f8048040 { -+ status = "okay"; -+ }; -+ -+ uart3: serial@fc008000 { -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart3_default>; -+ status = "disabled"; /* Conflict with isc. */ -+ }; -+ -+ uart4: serial@fc00c000 { -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mikrobus1_uart>; -+ status = "okay"; -+ }; -+ -+ flx3: flexcom@fc014000 { -+ atmel,flexcom-mode = ; -+ status = "disabled"; -+ -+ uart7: serial@200 { -+ compatible = "atmel,at91sam9260-usart"; -+ reg = <0x200 0x200>; -+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; -+ clocks = <&flx3_clk>; -+ clock-names = "usart"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx3_default>; -+ atmel,fifo-size = <32>; -+ status = "disabled"; /* Conflict with isc. */ -+ }; -+ -+ spi2: spi@400 { -+ compatible = "atmel,at91rm9200-spi"; -+ reg = <0x400 0x200>; -+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; -+ clocks = <&flx3_clk>; -+ clock-names = "spi_clk"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx3_default>; -+ atmel,fifo-size = <16>; -+ status = "disabled"; /* Conflict with isc. */ -+ }; -+ }; -+ -+ flx4: flexcom@fc018000 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ uart6: serial@200 { -+ compatible = "atmel,at91sam9260-usart"; -+ reg = <0x200 0x200>; -+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; -+ clocks = <&flx4_clk>; -+ clock-names = "usart"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx4_default>; -+ atmel,fifo-size = <32>; -+ status = "disabled"; /* Conflict with spi3 and i2c3. */ -+ }; -+ -+ spi3: spi@400 { -+ compatible = "atmel,at91rm9200-spi"; -+ reg = <0x400 0x200>; -+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; -+ clocks = <&flx4_clk>; -+ clock-names = "spi_clk"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; -+ atmel,fifo-size = <16>; -+ status = "okay"; -+ }; -+ -+ i2c3: i2c@600 { -+ compatible = "atmel,sama5d2-i2c"; -+ reg = <0x600 0x200>; -+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; -+ dmas = <0>, <0>; -+ dma-names = "tx", "rx"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&flx4_clk>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx4_default>; -+ atmel,fifo-size = <16>; -+ status = "disabled"; /* Conflict with uart6 and spi3. */ -+ }; -+ }; -+ -+ i2c1: i2c@fc028000 { -+ dmas = <0>, <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1_default>; -+ status = "okay"; -+ }; -+ -+ pinctrl@fc038000 { -+ -+ pinctrl_lcd_base: pinctrl_lcd_base { -+ pinmux = , -+ , -+ , -+ ; -+ bias-disable; -+ drive-strength = ; -+ }; -+ -+ pinctrl_lcd_rgb: pinctrl_lcd_rgb { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_lcd_pwm: pinctrl_lcd_pwm { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_can1_default: can1_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_flx3_default: flx3_default { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_i2c1_default: i2c1_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_isc_base: isc_base { -+ pinmux = , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_isc_data_8bit: isc_data_8bit { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_isc_data_9_10: isc_data_9_10 { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_isc_data_11_12: isc_data_11_12 { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_key_gpio_default: key_gpio_default { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ -+ pinctrl_led_gpio_default: led_gpio_default { -+ pinmux = , -+ , -+ ; -+ bias-pull-up; -+ }; -+ -+ pinctrl_sdmmc0_default: sdmmc0_default { -+ cmd_data { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ ck_cd_vddsel { -+ pinmux = , -+ , -+ ; -+ bias-disable; -+ }; -+ }; -+ -+ pinctrl_sdmmc1_default: sdmmc1_default { -+ cmd_data { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ conf-ck_cd { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ }; -+ -+ pinctrl_spi0_default: spi0_default { -+ pinmux = , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_uart1_default: uart1_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_uart3_default: uart3_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_usb_default: usb_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_usba_vbus: usba_vbus { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_an: mikrobus1_an { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_an: mikrobus2_an { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_rst: mikrobus1_rst { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_rst: mikrobus2_rst { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus_spi: mikrobus_spi { -+ pinmux = , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_pwm: mikrobus1_pwm { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_pwm: mikrobus2_pwm { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_int: mikrobus1_int { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_int: mikrobus2_int { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_uart: mikrobus1_uart { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_uart: mikrobus2_uart { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus_i2c: mikrobus1_i2c { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_flx4_default: flx4_uart_default { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ }; -+ -+ can1: can@fc050000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_can1_default>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_key_gpio_default>; -+ -+ pb4 { -+ label = "USER"; -+ gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; -+ linux,code = <0x104>; -+ wakeup-source; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_led_gpio_default>; -+ status = "okay"; /* Conflict with pwm0. */ -+ -+ red { -+ label = "red"; -+ gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ green { -+ label = "green"; -+ gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ blue { -+ label = "blue"; -+ gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ }; -+}; ---- a/include/dt-bindings/pinctrl/at91.h -+++ b/include/dt-bindings/pinctrl/at91.h -@@ -37,4 +37,8 @@ - #define AT91_PERIPH_C 3 - #define AT91_PERIPH_D 4 - -+#define ATMEL_PIO_DRVSTR_LO 1 -+#define ATMEL_PIO_DRVSTR_ME 2 -+#define ATMEL_PIO_DRVSTR_HI 3 -+ - #endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */ diff --git a/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch b/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch deleted file mode 100644 index e33840cfd8..0000000000 --- a/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch +++ /dev/null @@ -1,435 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - wb45n.dtb - dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-kizbox2.dtb \ -+ at91-sama5d2_ptc_ek.dtb \ - at91-sama5d27_som1_ek.dtb \ - at91-sama5d2_xplained.dtb \ - at91-sama5d3_xplained.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts -@@ -0,0 +1,422 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR X11) -+/* -+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board -+ * -+ * Copyright (C) 2017 Microchip/Atmel, -+ * 2017 Wenyou Yang -+ * 2017 Ludovic Desroches -+ */ -+/dts-v1/; -+#include "sama5d2.dtsi" -+#include "sama5d2-pinfunc.h" -+#include -+#include -+#include -+ -+/ { -+ model = "Atmel SAMA5D2 PTC EK"; -+ compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; -+ -+ aliases { -+ serial0 = &uart0; -+ i2c0 = &i2c0; -+ i2c1 = &i2c1; -+ i2c2 = &i2c2; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ memory { -+ reg = <0x20000000 0x80000>; -+ }; -+ -+ clocks { -+ slow_xtal { -+ clock-frequency = <32768>; -+ }; -+ -+ main_xtal { -+ clock-frequency = <24000000>; -+ }; -+ }; -+ -+ ahb { -+ usb0: gadget@00300000 { -+ atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usba_vbus>; -+ status = "okay"; -+ }; -+ -+ usb1: ohci@00400000 { -+ num-ports = <3>; -+ atmel,vbus-gpio = <0 -+ &pioA PIN_PB12 GPIO_ACTIVE_HIGH -+ 0 -+ >; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usb_default>; -+ status = "okay"; -+ }; -+ -+ usb2: ehci@00500000 { -+ status = "okay"; -+ }; -+ -+ nand0: nand@80000000 { -+ nand-bus-width = <8>; -+ nand-ecc-mode = "hw"; -+ nand-on-flash-bbt; -+ atmel,has-pmecc; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_nand_default>; -+ status = "okay"; /* conflicts with sdmmc1 and qspi0 */ -+ -+ at91bootstrap@0 { -+ label = "bootstrap"; -+ reg = <0x0 0x40000>; -+ }; -+ -+ bootloader@40000 { -+ label = "bootloader"; -+ reg = <0x40000 0xc0000>; -+ }; -+ -+ bootloaderenv@0x100000 { -+ label = "bootloader env"; -+ reg = <0x100000 0x40000>; -+ }; -+ -+ bootloaderenvred@0x140000 { -+ label = "bootloader env redundant"; -+ reg = <0x140000 0x40000>; -+ }; -+ -+ dtb@180000 { -+ label = "device tree"; -+ reg = <0x180000 0x80000>; -+ }; -+ -+ kernel@200000 { -+ label = "kernel"; -+ reg = <0x200000 0x600000>; -+ }; -+ -+ rootfs@800000 { -+ label = "rootfs"; -+ reg = <0x800000 0x1f800000>; -+ }; -+ }; -+ -+ sdmmc0: sdio-host@a0000000 { -+ bus-width = <8>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_sdmmc0_default>; -+ status = "okay"; -+ }; -+ -+ apb { -+ pmc: pmc@f0014000 { -+ pmc_fast_restart { -+ compatible = "atmel,sama5d2-pmc-fast-startup"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ atmel,wakeup-rtc-timer; -+ -+ wkpin: input@0 { -+ reg = <0>; -+ }; -+ -+ gmac_wol: input@10 { -+ reg = <10>; -+ atmel,wakeup-active-high; -+ }; -+ }; -+ }; -+ -+ spi0: spi@f8000000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_spi0_default>; -+ status = "okay"; -+ -+ /* -+ m25p80@0 { -+ compatible = "atmel,at25df321a"; -+ reg = <0>; -+ spi-max-frequency = <50000000>; -+ }; -+ */ -+ }; -+ -+ macb0: ethernet@f8008000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; -+ phy-mode = "rmii"; -+ status = "okay"; -+ -+ ethernet-phy@1 { -+ reg = <0x1>; -+ interrupt-parent = <&pioA>; -+ interrupts = <56 IRQ_TYPE_LEVEL_LOW>; -+ }; -+ }; -+ -+ uart0: serial@f801c000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart0_default>; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "okay"; -+ }; -+ -+ uart2: serial@f8024000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2_default>; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@f8028000 { -+ dmas = <0>, <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c0_default>; -+ i2c-sda-hold-time-ns = <350>; -+ status = "okay"; -+ }; -+ -+ flx0: flexcom@f8034000 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ i2c2: i2c@600 { -+ compatible = "atmel,sama5d2-i2c"; -+ reg = <0x600 0x200>; -+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; -+ dmas = <0>, <0>; -+ dma-names = "tx", "rx"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&flx0_clk>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx0_default>; -+ atmel,fifo-size = <16>; -+ status = "okay"; -+ }; -+ }; -+ -+ shdwc@f8048010 { -+ atmel,shdwc-debouncer = <976>; -+ -+ input@0 { -+ reg = <0>; -+ atmel,wakeup-type = "low"; -+ }; -+ }; -+ -+ watchdog@f8048040 { -+ status = "okay"; -+ }; -+ -+ spi1: spi@fc000000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_spi1_default>; -+ status = "okay"; -+ }; -+ -+ i2c1: i2c@fc028000 { -+ dmas = <0>, <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1_default>; -+ status = "okay"; -+ -+ at24@50 { -+ compatible = "24c02"; -+ reg = <0x50>; -+ pagesize = <8>; -+ }; -+ }; -+ -+ pinctrl@fc038000 { -+ pinctrl_flx0_default: flx0_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_i2c0_default: i2c0_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_i2c1_default: i2c1_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_key_gpio_default: key_gpio_default { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ -+ pinctrl_led_gpio_default: led_gpio_default { -+ pinmux = , -+ , -+ ; -+ bias-pull-up; -+ }; -+ -+ pinctrl_macb0_default: macb0_default { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_macb0_phy_irq: macb0_phy_irq { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_nand_default: nand_default { -+ re_we_data { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-pull-up; -+ drive-strength = ; -+ }; -+ -+ ale_cle_rdy_cs { -+ pinmux = , -+ , -+ , -+ ; -+ bias-pull-up; -+ }; -+ }; -+ -+ pinctrl_sdmmc0_default: sdmmc0_default { -+ cmd_data { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-pull-up; -+ }; -+ -+ ck_cd_vddsel { -+ pinmux = , -+ , -+ ; -+ bias-disable; -+ }; -+ }; -+ -+ pinctrl_spi0_default: spi0_default { -+ pinmux = , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_spi1_default: spi1_default { -+ pinmux = , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_uart0_default: uart0_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_uart2_default: uart2_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_usb_default: usb_default { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_usba_vbus: usba_vbus { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ }; -+ -+ ptc@fc060000 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_key_gpio_default>; -+ -+ bp1 { -+ label = "PB_USER"; -+ gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; -+ linux,code = <0x104>; -+ wakeup-source; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_led_gpio_default>; -+ status = "okay"; -+ -+ red { -+ label = "red"; -+ gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ green { -+ label = "green"; -+ gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ blue { -+ label = "blue"; -+ gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ }; -+}; diff --git a/target/linux/generic/config-4.14 b/target/linux/generic/config-4.14 index 9680c4c41e..f24630a554 100644 --- a/target/linux/generic/config-4.14 +++ b/target/linux/generic/config-4.14 @@ -902,6 +902,8 @@ CONFIG_CRYPTO_BLKCIPHER2=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_DEV_ATMEL_AES is not set +# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set +# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set # CONFIG_CRYPTO_DEV_ATMEL_SHA is not set # CONFIG_CRYPTO_DEV_ATMEL_TDES is not set # CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set diff --git a/target/linux/generic/config-4.19 b/target/linux/generic/config-4.19 index aa94466148..a2d7988c6e 100644 --- a/target/linux/generic/config-4.19 +++ b/target/linux/generic/config-4.19 @@ -946,6 +946,8 @@ CONFIG_CRYPTO_BLKCIPHER2=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_DEV_ATMEL_AES is not set +# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set +# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set # CONFIG_CRYPTO_DEV_ATMEL_SHA is not set # CONFIG_CRYPTO_DEV_ATMEL_TDES is not set # CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set