From: Adrian Hunter Date: Tue, 12 Jan 2010 10:25:13 +0000 (+0200) Subject: regulator: Add 'start-up time' to fixed voltage regulators X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=eda79a3041a2cada0d4ee9491c99c3874b322356;p=openwrt%2Fstaging%2Fblogic.git regulator: Add 'start-up time' to fixed voltage regulators Add a field to specify a delay for the start-up time of a fixed voltage regulator. Signed-off-by: Adrian Hunter Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index f9f516a3028a..ee3e7eb97b1c 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -24,12 +24,14 @@ #include #include #include +#include struct fixed_voltage_data { struct regulator_desc desc; struct regulator_dev *dev; int microvolts; int gpio; + unsigned startup_delay; unsigned enable_high:1; unsigned is_enabled:1; }; @@ -48,6 +50,8 @@ static int fixed_voltage_enable(struct regulator_dev *dev) if (gpio_is_valid(data->gpio)) { gpio_set_value_cansleep(data->gpio, data->enable_high); data->is_enabled = 1; + if (data->startup_delay) + udelay(data->startup_delay); } return 0; @@ -117,6 +121,7 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev) drvdata->microvolts = config->microvolts; drvdata->gpio = config->gpio; + drvdata->startup_delay = config->startup_delay; if (gpio_is_valid(config->gpio)) { drvdata->enable_high = config->enable_high; diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index e94a4a1c7c8a..ffd7d508e726 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -25,6 +25,7 @@ struct regulator_init_data; * @microvolts: Output voltage of regulator * @gpio: GPIO to use for enable control * set to -EINVAL if not used + * @startup_delay: Start-up time in microseconds * @enable_high: Polarity of enable GPIO * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at @@ -41,6 +42,7 @@ struct fixed_voltage_config { const char *supply_name; int microvolts; int gpio; + unsigned startup_delay; unsigned enable_high:1; unsigned enabled_at_boot:1; struct regulator_init_data *init_data;