From: Tim Bird Date: Thu, 16 Jul 2015 23:55:31 +0000 (-0700) Subject: ARM: dts: qcom: Add binding for the qcom coincell charger X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ee2b7f60a5c5e391fdde907ac61f135d87e74622;p=openwrt%2Fstaging%2Fblogic.git ARM: dts: qcom: Add binding for the qcom coincell charger This binding is used to configure the driver for the coincell charger found in Qualcomm PMICs. Signed-off-by: Tim Bird Reviewed-by: Andy Gross Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt new file mode 100644 index 000000000000..0e6d8754e7ec --- /dev/null +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt @@ -0,0 +1,48 @@ +Qualcomm Coincell Charger: + +The hardware block controls charging for a coincell or capacitor that is +used to provide power backup for certain features of the power management +IC (PMIC) + +- compatible: + Usage: required + Value type: + Definition: must be: "qcom,pm8941-coincell" + +- reg: + Usage: required + Value type: + Definition: base address of the coincell charger registers + +- qcom,rset-ohms: + Usage: required + Value type: + Definition: resistance (in ohms) for current-limiting resistor + must be one of: 800, 1200, 1700, 2100 + +- qcom,vset-millivolts: + Usage: required + Value type: + Definition: voltage (in millivolts) to apply for charging + must be one of: 2500, 3000, 3100, 3200 + +- qcom,charger-disable: + Usage: optional + Value type: + Definition: definining this property disables charging + +This charger is a sub-node of one of the 8941 PMIC blocks, and is specified +as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and +../mfd/qcom-pm8xxx.txt + +Example: + + pm8941@0 { + coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + };