From: Philip Rakity Date: Fri, 7 Jan 2011 19:26:52 +0000 (-0800) Subject: ARM: mmp: MMP2 drive strength FAST using wrong value X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ee309d3d6e60e19e93cde22e49b87c434dc826ba;p=openwrt%2Fstaging%2Fblogic.git ARM: mmp: MMP2 drive strength FAST using wrong value Drive strength for MMP2 is a 2 bit value but because of the mapping in plat-pxa/mfp.h needs to be shifted up one bit to handle real location in mfp registers. (MMP2 and PXA910 drive strength start at bit 11 while PXA168 starts at bit 10). Values 0, 1, 2, and 3 effectively need to be 0, 2, 4, and 6 to fit into register. 8 does not work. Signed-off-by: Philip Rakity Tested-by: John Watlington Signed-off-by: Eric Miao --- diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h index 117e30366087..4ad38629c3f6 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h @@ -6,7 +6,7 @@ #define MFP_DRIVE_VERY_SLOW (0x0 << 13) #define MFP_DRIVE_SLOW (0x2 << 13) #define MFP_DRIVE_MEDIUM (0x4 << 13) -#define MFP_DRIVE_FAST (0x8 << 13) +#define MFP_DRIVE_FAST (0x6 << 13) /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF0)