From: Eric Huang Date: Tue, 2 Feb 2016 21:09:24 +0000 (-0500) Subject: drm/amd/powerplay: add thermal control for elm/baf X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=eede52627ba1e029f6542fcdf176d7983264d127;p=openwrt%2Fstaging%2Fblogic.git drm/amd/powerplay: add thermal control for elm/baf Signed-off-by: Eric Huang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile index 2982d5c9a059..f13327d3f24c 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile @@ -9,7 +9,7 @@ HARDWARE_MGR = hwmgr.o processpptables.o functiontables.o \ tonga_hwmgr.o pppcielanes.o tonga_thermal.o\ fiji_powertune.o fiji_hwmgr.o tonga_clockpowergating.o \ fiji_clockpowergating.o fiji_thermal.o \ - ellesmere_hwmgr.o ellesmere_powertune.o + ellesmere_hwmgr.o ellesmere_powertune.o ellesmere_thermal.o AMD_PP_HWMGR = $(addprefix $(AMD_PP_PATH)/hwmgr/,$(HARDWARE_MGR)) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c index 10e8e87d8384..3ef8d3c1c1ef 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_hwmgr.c @@ -57,6 +57,8 @@ #include "dce/dce_10_0_d.h" #include "dce/dce_10_0_sh_mask.h" +#include "ellesmere_thermal.h" + #define MC_CG_ARB_FREQ_F0 0x0a #define MC_CG_ARB_FREQ_F1 0x0b #define MC_CG_ARB_FREQ_F2 0x0c @@ -4198,8 +4200,14 @@ static int ellesmere_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *i static int ellesmere_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm) { + hwmgr->thermal_controller. + advanceFanControlParameters.usMaxFanPWM = us_max_fan_pwm; + if (phm_is_hw_access_blocked(hwmgr)) return 0; + + return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm); } int ellesmere_notify_smc_display_change(struct pp_hwmgr *hwmgr, bool has_display) @@ -4290,9 +4298,16 @@ int ellesmere_display_configuration_changed_task(struct pp_hwmgr *hwmgr) * @param usMaxFanRpm: max operating fan RPM value. * @return The response that came from the SMC. */ -static int ellesmere_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm) +static int ellesmere_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_rpm) { - return 0; + hwmgr->thermal_controller. + advanceFanControlParameters.usMaxFanRPM = us_max_fan_rpm; + + if (phm_is_hw_access_blocked(hwmgr)) + return 0; + + return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetFanRpmMax, us_max_fan_rpm); } int ellesmere_register_internal_thermal_interrupt(struct pp_hwmgr *hwmgr, @@ -4529,15 +4544,15 @@ static const struct pp_hwmgr_func ellesmere_hwmgr_funcs = { .display_config_changed = ellesmere_display_configuration_changed_task, .set_max_fan_pwm_output = ellesmere_set_max_fan_pwm_output, .set_max_fan_rpm_output = ellesmere_set_max_fan_rpm_output, - .get_temperature = NULL, - .stop_thermal_controller = NULL, - .get_fan_speed_info = NULL, - .get_fan_speed_percent = NULL, - .set_fan_speed_percent = NULL, - .reset_fan_speed_to_default = NULL, - .get_fan_speed_rpm = NULL, - .set_fan_speed_rpm = NULL, - .uninitialize_thermal_controller = NULL, + .get_temperature = ellesmere_thermal_get_temperature, + .stop_thermal_controller = ellesmere_thermal_stop_thermal_controller, + .get_fan_speed_info = ellesmere_fan_ctrl_get_fan_speed_info, + .get_fan_speed_percent = ellesmere_fan_ctrl_get_fan_speed_percent, + .set_fan_speed_percent = ellesmere_fan_ctrl_set_fan_speed_percent, + .reset_fan_speed_to_default = ellesmere_fan_ctrl_reset_fan_speed_to_default, + .get_fan_speed_rpm = ellesmere_fan_ctrl_get_fan_speed_rpm, + .set_fan_speed_rpm = ellesmere_fan_ctrl_set_fan_speed_rpm, + .uninitialize_thermal_controller = ellesmere_thermal_ctrl_uninitialize_thermal_controller, .register_internal_thermal_interrupt = ellesmere_register_internal_thermal_interrupt, .check_smc_update_required_for_display_configuration = ellesmere_check_smc_update_required_for_display_configuration, .check_states_equal = ellesmere_check_states_equal, @@ -4554,7 +4569,7 @@ int ellesemere_hwmgr_init(struct pp_hwmgr *hwmgr) hwmgr->backend = data; hwmgr->hwmgr_func = &ellesmere_hwmgr_funcs; hwmgr->pptable_func = &tonga_pptable_funcs; - + pp_ellesmere_thermal_initialize(hwmgr); return 0; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.c new file mode 100644 index 000000000000..08be40069ad9 --- /dev/null +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.c @@ -0,0 +1,711 @@ +/* + * Copyright 2016 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include "ellesmere_thermal.h" +#include "ellesmere_hwmgr.h" +#include "ellesmere_smumgr.h" +#include "ellesmere_ppsmc.h" +#include "smu/smu_7_1_3_d.h" +#include "smu/smu_7_1_3_sh_mask.h" + +int ellesmere_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, + struct phm_fan_speed_info *fan_speed_info) +{ + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return 0; + + fan_speed_info->supports_percent_read = true; + fan_speed_info->supports_percent_write = true; + fan_speed_info->min_percent = 0; + fan_speed_info->max_percent = 100; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_FanSpeedInTableIsRPM) && + hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) { + fan_speed_info->supports_rpm_read = true; + fan_speed_info->supports_rpm_write = true; + fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM; + fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM; + } else { + fan_speed_info->min_rpm = 0; + fan_speed_info->max_rpm = 0; + } + + return 0; +} + +int ellesmere_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, + uint32_t *speed) +{ + uint32_t duty100; + uint32_t duty; + uint64_t tmp64; + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return 0; + + duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL1, FMAX_DUTY100); + duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_STATUS, FDO_PWM_DUTY); + + if (duty100 == 0) + return -EINVAL; + + + tmp64 = (uint64_t)duty * 100; + do_div(tmp64, duty100); + *speed = (uint32_t)tmp64; + + if (*speed > 100) + *speed = 100; + + return 0; +} + +int ellesmere_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) +{ + uint32_t tach_period; + uint32_t crystal_clock_freq; + + if (hwmgr->thermal_controller.fanInfo.bNoFan || + (hwmgr->thermal_controller.fanInfo. + ucTachometerPulsesPerRevolution == 0)) + return 0; + + tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_TACH_STATUS, TACH_PERIOD); + + if (tach_period == 0) + return -EINVAL; + + crystal_clock_freq = tonga_get_xclk(hwmgr); + + *speed = 60 * crystal_clock_freq * 10000 / tach_period; + + return 0; +} + +/** +* Set Fan Speed Control to static mode, so that the user can decide what speed to use. +* @param hwmgr the address of the powerplay hardware manager. +* mode the fan control mode, 0 default, 1 by percent, 5, by RPM +* @exception Should always succeed. +*/ +int ellesmere_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode) +{ + + if (hwmgr->fan_ctrl_is_in_default_mode) { + hwmgr->fan_ctrl_default_mode = + PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL2, FDO_PWM_MODE); + hwmgr->tmin = + PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL2, TMIN); + hwmgr->fan_ctrl_is_in_default_mode = false; + } + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL2, TMIN, 0); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL2, FDO_PWM_MODE, mode); + + return 0; +} + +/** +* Reset Fan Speed Control to default mode. +* @param hwmgr the address of the powerplay hardware manager. +* @exception Should always succeed. +*/ +int ellesmere_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr) +{ + if (!hwmgr->fan_ctrl_is_in_default_mode) { + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL2, TMIN, hwmgr->tmin); + hwmgr->fan_ctrl_is_in_default_mode = true; + } + + return 0; +} + +int ellesmere_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr) +{ + int result; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_ODFuzzyFanControlSupport)) { + cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY); + result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl); + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_FanSpeedInTableIsRPM)) + hwmgr->hwmgr_func->set_max_fan_rpm_output(hwmgr, + hwmgr->thermal_controller. + advanceFanControlParameters.usMaxFanRPM); + else + hwmgr->hwmgr_func->set_max_fan_pwm_output(hwmgr, + hwmgr->thermal_controller. + advanceFanControlParameters.usMaxFanPWM); + + } else { + cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE); + result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl); + } + + if (!result && hwmgr->thermal_controller. + advanceFanControlParameters.ucTargetTemperature) + result = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetFanTemperatureTarget, + hwmgr->thermal_controller. + advanceFanControlParameters.ucTargetTemperature); + + return result; +} + + +int ellesmere_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr) +{ + return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StopFanControl); +} + +/** +* Set Fan Speed in percent. +* @param hwmgr the address of the powerplay hardware manager. +* @param speed is the percentage value (0% - 100%) to be set. +* @exception Fails is the 100% setting appears to be 0. +*/ +int ellesmere_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, + uint32_t speed) +{ + uint32_t duty100; + uint32_t duty; + uint64_t tmp64; + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return 0; + + if (speed > 100) + speed = 100; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_MicrocodeFanControl)) + ellesmere_fan_ctrl_stop_smc_fan_control(hwmgr); + + duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL1, FMAX_DUTY100); + + if (duty100 == 0) + return -EINVAL; + + tmp64 = (uint64_t)speed * 100; + do_div(tmp64, duty100); + duty = (uint32_t)tmp64; + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL0, FDO_STATIC_DUTY, duty); + + return ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC); +} + +/** +* Reset Fan Speed to default. +* @param hwmgr the address of the powerplay hardware manager. +* @exception Always succeeds. +*/ +int ellesmere_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr) +{ + int result; + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return 0; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_MicrocodeFanControl)) { + result = ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC); + if (!result) + result = ellesmere_fan_ctrl_start_smc_fan_control(hwmgr); + } else + result = ellesmere_fan_ctrl_set_default_mode(hwmgr); + + return result; +} + +/** +* Set Fan Speed in RPM. +* @param hwmgr the address of the powerplay hardware manager. +* @param speed is the percentage value (min - max) to be set. +* @exception Fails is the speed not lie between min and max. +*/ +int ellesmere_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed) +{ + uint32_t tach_period; + uint32_t crystal_clock_freq; + + if (hwmgr->thermal_controller.fanInfo.bNoFan || + (hwmgr->thermal_controller.fanInfo. + ucTachometerPulsesPerRevolution == 0) || + (speed < hwmgr->thermal_controller.fanInfo.ulMinRPM) || + (speed > hwmgr->thermal_controller.fanInfo.ulMaxRPM)) + return 0; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_MicrocodeFanControl)) + ellesmere_fan_ctrl_stop_smc_fan_control(hwmgr); + + crystal_clock_freq = tonga_get_xclk(hwmgr); + + tach_period = 60 * crystal_clock_freq * 10000 / (8 * speed); + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_TACH_STATUS, TACH_PERIOD, tach_period); + + return ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC); +} + +/** +* Reads the remote temperature from the SIslands thermal controller. +* +* @param hwmgr The address of the hardware manager. +*/ +int ellesmere_thermal_get_temperature(struct pp_hwmgr *hwmgr) +{ + int temp; + + temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_MULT_THERMAL_STATUS, CTF_TEMP); + + /* Bit 9 means the reading is lower than the lowest usable value. */ + if (temp & 0x200) + temp = ELLESMERE_THERMAL_MAXIMUM_TEMP_READING; + else + temp = temp & 0x1ff; + + temp *= PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + + return temp; +} + +/** +* Set the requested temperature range for high and low alert signals +* +* @param hwmgr The address of the hardware manager. +* @param range Temperature range to be programmed for high and low alert signals +* @exception PP_Result_BadInput if the input data is not valid. +*/ +static int ellesmere_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, + uint32_t low_temp, uint32_t high_temp) +{ + uint32_t low = ELLESMERE_THERMAL_MINIMUM_ALERT_TEMP * + PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + uint32_t high = ELLESMERE_THERMAL_MAXIMUM_ALERT_TEMP * + PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + + if (low < low_temp) + low = low_temp; + if (high > high_temp) + high = high_temp; + + if (low > high) + return -EINVAL; + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_INT, DIG_THERM_INTH, + (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_INT, DIG_THERM_INTL, + (low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_CTRL, DIG_THERM_DPM, + (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)); + + return 0; +} + +/** +* Programs thermal controller one-time setting registers +* +* @param hwmgr The address of the hardware manager. +*/ +static int ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr) +{ + if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_TACH_CTRL, EDGE_PER_REV, + hwmgr->thermal_controller.fanInfo. + ucTachometerPulsesPerRevolution - 1); + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28); + + return 0; +} + +/** +* Enable thermal alerts on the RV770 thermal controller. +* +* @param hwmgr The address of the hardware manager. +*/ +static int ellesmere_thermal_enable_alert(struct pp_hwmgr *hwmgr) +{ + uint32_t alert; + + alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_INT, THERM_INT_MASK); + alert &= ~(ELLESMERE_THERMAL_HIGH_ALERT_MASK | ELLESMERE_THERMAL_LOW_ALERT_MASK); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_INT, THERM_INT_MASK, alert); + + /* send message to SMU to enable internal thermal interrupts */ + return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Enable); +} + +/** +* Disable thermal alerts on the RV770 thermal controller. +* @param hwmgr The address of the hardware manager. +*/ +static int ellesmere_thermal_disable_alert(struct pp_hwmgr *hwmgr) +{ + uint32_t alert; + + alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_INT, THERM_INT_MASK); + alert |= (ELLESMERE_THERMAL_HIGH_ALERT_MASK | ELLESMERE_THERMAL_LOW_ALERT_MASK); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_THERMAL_INT, THERM_INT_MASK, alert); + + /* send message to SMU to disable internal thermal interrupts */ + return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Disable); +} + +/** +* Uninitialize the thermal controller. +* Currently just disables alerts. +* @param hwmgr The address of the hardware manager. +*/ +int ellesmere_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr) +{ + int result = ellesmere_thermal_disable_alert(hwmgr); + + if (!hwmgr->thermal_controller.fanInfo.bNoFan) + ellesmere_fan_ctrl_set_default_mode(hwmgr); + + return result; +} + +/** +* Set up the fan table to control the fan using the SMC. +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from set temperature range routine +*/ +int tf_ellesmere_thermal_setup_fan_table(struct pp_hwmgr *hwmgr, + void *input, void *output, void *storage, int result) +{ + struct ellesmere_hwmgr *data = (struct ellesmere_hwmgr *)(hwmgr->backend); + SMU74_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE }; + uint32_t duty100; + uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2; + uint16_t fdo_min, slope1, slope2; + uint32_t reference_clock; + int res; + uint64_t tmp64; + + if (data->fan_table_start == 0) { + phm_cap_unset(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_MicrocodeFanControl); + return 0; + } + + duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_FDO_CTRL1, FMAX_DUTY100); + + if (duty100 == 0) { + phm_cap_unset(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_MicrocodeFanControl); + return 0; + } + + tmp64 = hwmgr->thermal_controller.advanceFanControlParameters. + usPWMMin * duty100; + do_div(tmp64, 10000); + fdo_min = (uint16_t)tmp64; + + t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed - + hwmgr->thermal_controller.advanceFanControlParameters.usTMin; + t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh - + hwmgr->thermal_controller.advanceFanControlParameters.usTMed; + + pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed - + hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin; + pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh - + hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed; + + slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100); + slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100); + + fan_table.TempMin = cpu_to_be16((50 + hwmgr-> + thermal_controller.advanceFanControlParameters.usTMin) / 100); + fan_table.TempMed = cpu_to_be16((50 + hwmgr-> + thermal_controller.advanceFanControlParameters.usTMed) / 100); + fan_table.TempMax = cpu_to_be16((50 + hwmgr-> + thermal_controller.advanceFanControlParameters.usTMax) / 100); + + fan_table.Slope1 = cpu_to_be16(slope1); + fan_table.Slope2 = cpu_to_be16(slope2); + + fan_table.FdoMin = cpu_to_be16(fdo_min); + + fan_table.HystDown = cpu_to_be16(hwmgr-> + thermal_controller.advanceFanControlParameters.ucTHyst); + + fan_table.HystUp = cpu_to_be16(1); + + fan_table.HystSlope = cpu_to_be16(1); + + fan_table.TempRespLim = cpu_to_be16(5); + + reference_clock = tonga_get_xclk(hwmgr); + + fan_table.RefreshPeriod = cpu_to_be32((hwmgr-> + thermal_controller.advanceFanControlParameters.ulCycleDelay * + reference_clock) / 1600); + + fan_table.FdoMax = cpu_to_be16((uint16_t)duty100); + + fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD( + hwmgr->device, CGS_IND_REG__SMC, + CG_MULT_THERMAL_CTRL, TEMP_SEL); + + res = ellesmere_copy_bytes_to_smc(hwmgr->smumgr, data->fan_table_start, + (uint8_t *)&fan_table, (uint32_t)sizeof(fan_table), + data->sram_end); + + if (!res && hwmgr->thermal_controller. + advanceFanControlParameters.ucMinimumPWMLimit) + res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetFanMinPwm, + hwmgr->thermal_controller. + advanceFanControlParameters.ucMinimumPWMLimit); + + if (!res && hwmgr->thermal_controller. + advanceFanControlParameters.ulMinFanSCLKAcousticLimit) + res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetFanSclkTarget, + hwmgr->thermal_controller. + advanceFanControlParameters.ulMinFanSCLKAcousticLimit); + + if (res) + phm_cap_unset(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_MicrocodeFanControl); + + return 0; +} + +/** +* Start the fan control on the SMC. +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from set temperature range routine +*/ +int tf_ellesmere_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr, + void *input, void *output, void *storage, int result) +{ +/* If the fantable setup has failed we could have disabled + * PHM_PlatformCaps_MicrocodeFanControl even after + * this function was included in the table. + * Make sure that we still think controlling the fan is OK. +*/ + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_MicrocodeFanControl)) { + ellesmere_fan_ctrl_start_smc_fan_control(hwmgr); + ellesmere_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC); + } + + return 0; +} + +/** +* Set temperature range for high and low alerts +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from set temperature range routine +*/ +int tf_ellesmere_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, + void *input, void *output, void *storage, int result) +{ + struct PP_TemperatureRange *range = (struct PP_TemperatureRange *)input; + + if (range == NULL) + return -EINVAL; + + return ellesmere_thermal_set_temperature_range(hwmgr, range->min, range->max); +} + +/** +* Programs one-time setting registers +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from initialize thermal controller routine +*/ +int tf_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr, + void *input, void *output, void *storage, int result) +{ + return ellesmere_thermal_initialize(hwmgr); +} + +/** +* Enable high and low alerts +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from enable alert routine +*/ +int tf_ellesmere_thermal_enable_alert(struct pp_hwmgr *hwmgr, + void *input, void *output, void *storage, int result) +{ + return ellesmere_thermal_enable_alert(hwmgr); +} + +/** +* Disable high and low alerts +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from disable alert routine +*/ +static int tf_ellesmere_thermal_disable_alert(struct pp_hwmgr *hwmgr, + void *input, void *output, void *storage, int result) +{ + return ellesmere_thermal_disable_alert(hwmgr); +} + +static int tf_ellesmere_thermal_avfs_enable(struct pp_hwmgr *hwmgr, + void *input, void *output, void *storage, int result) +{ + int ret; + struct pp_smumgr *smumgr = (struct pp_smumgr *)(hwmgr->smumgr); + struct ellesmere_smumgr *smu_data = (struct ellesmere_smumgr *)(smumgr->backend); + + if (smu_data->avfs.avfs_btc_status != AVFS_BTC_ENABLEAVFS) + return 0; + + ret = (smum_send_msg_to_smc(smumgr, PPSMC_MSG_EnableAvfs) == 0) ? + 0 : -1; + + if (!ret) + /* If this param is not changed, this function could fire unnecessarily */ + smu_data->avfs.avfs_btc_status = AVFS_BTC_COMPLETED_PREVIOUSLY; + + return ret; +} + +static struct phm_master_table_item +ellesmere_thermal_start_thermal_controller_master_list[] = { + {NULL, tf_ellesmere_thermal_initialize}, + {NULL, tf_ellesmere_thermal_set_temperature_range}, + {NULL, tf_ellesmere_thermal_enable_alert}, + {NULL, tf_ellesmere_thermal_avfs_enable}, +/* We should restrict performance levels to low before we halt the SMC. + * On the other hand we are still in boot state when we do this + * so it would be pointless. + * If this assumption changes we have to revisit this table. + */ + {NULL, tf_ellesmere_thermal_setup_fan_table}, + {NULL, tf_ellesmere_thermal_start_smc_fan_control}, + {NULL, NULL} +}; + +static struct phm_master_table_header +ellesmere_thermal_start_thermal_controller_master = { + 0, + PHM_MasterTableFlag_None, + ellesmere_thermal_start_thermal_controller_master_list +}; + +static struct phm_master_table_item +ellesmere_thermal_set_temperature_range_master_list[] = { + {NULL, tf_ellesmere_thermal_disable_alert}, + {NULL, tf_ellesmere_thermal_set_temperature_range}, + {NULL, tf_ellesmere_thermal_enable_alert}, + {NULL, NULL} +}; + +struct phm_master_table_header +ellesmere_thermal_set_temperature_range_master = { + 0, + PHM_MasterTableFlag_None, + ellesmere_thermal_set_temperature_range_master_list +}; + +int ellesmere_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr) +{ + if (!hwmgr->thermal_controller.fanInfo.bNoFan) + ellesmere_fan_ctrl_set_default_mode(hwmgr); + return 0; +} + +/** +* Initializes the thermal controller related functions in the Hardware Manager structure. +* @param hwmgr The address of the hardware manager. +* @exception Any error code from the low-level communication. +*/ +int pp_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr) +{ + int result; + + result = phm_construct_table(hwmgr, + &ellesmere_thermal_set_temperature_range_master, + &(hwmgr->set_temperature_range)); + + if (!result) { + result = phm_construct_table(hwmgr, + &ellesmere_thermal_start_thermal_controller_master, + &(hwmgr->start_thermal_controller)); + if (result) + phm_destroy_table(hwmgr, &(hwmgr->set_temperature_range)); + } + + if (!result) + hwmgr->fan_ctrl_is_in_default_mode = true; + return result; +} + diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.h b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.h new file mode 100644 index 000000000000..4263e9bdf76d --- /dev/null +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ellesmere_thermal.h @@ -0,0 +1,62 @@ +/* + * Copyright 2016 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef _ELLESMERE_THERMAL_H_ +#define _ELLESMERE_THERMAL_H_ + +#include "hwmgr.h" + +#define ELLESMERE_THERMAL_HIGH_ALERT_MASK 0x1 +#define ELLESMERE_THERMAL_LOW_ALERT_MASK 0x2 + +#define ELLESMERE_THERMAL_MINIMUM_TEMP_READING -256 +#define ELLESMERE_THERMAL_MAXIMUM_TEMP_READING 255 + +#define ELLESMERE_THERMAL_MINIMUM_ALERT_TEMP 0 +#define ELLESMERE_THERMAL_MAXIMUM_ALERT_TEMP 255 + +#define FDO_PWM_MODE_STATIC 1 +#define FDO_PWM_MODE_STATIC_RPM 5 + + +extern int tf_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result); +extern int tf_ellesmere_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result); +extern int tf_ellesmere_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result); + +extern int ellesmere_thermal_get_temperature(struct pp_hwmgr *hwmgr); +extern int ellesmere_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr); +extern int ellesmere_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info); +extern int ellesmere_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed); +extern int ellesmere_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr); +extern int ellesmere_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode); +extern int ellesmere_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed); +extern int ellesmere_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr); +extern int pp_ellesmere_thermal_initialize(struct pp_hwmgr *hwmgr); +extern int ellesmere_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr); +extern int ellesmere_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed); +extern int ellesmere_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed); +extern int ellesmere_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr); +extern uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr); + +#endif +