From: Pavel Kubelun Date: Sun, 19 Mar 2017 11:59:26 +0000 (-0400) Subject: ipq806x: route gpio interrupts to APPS processor through scm firmware X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ef4ca01d6fa762d9cfc17138bc7dc3a4eb5b83cb;p=openwrt%2Fstaging%2Faparcar.git ipq806x: route gpio interrupts to APPS processor through scm firmware For IPQ806x targets, TZ protects the registers that are used to configure the routing of interrupts to a target processor. To resolve this, this patch uses scm call to route GPIO interrupts to application processor. Also the scm call interface is changed. Signed-off-by: Pavel Kubelun --- diff --git a/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch new file mode 100644 index 0000000000..2eac44d1e4 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch @@ -0,0 +1,166 @@ +From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001 +From: Ajay Kishore +Date: Tue, 24 Jan 2017 14:14:16 +0530 +Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps + +For IPQ806x targets, TZ protects the registers that are used to +configure the routing of interrupts to a target processor. +To resolve this, this patch uses scm call to route GPIO interrupts +to application processor. Also the scm call interface is changed. + +Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce +Signed-off-by: Ajay Kishore +--- + drivers/firmware/qcom_scm-32.c | 17 +++++++++++++++++ + drivers/firmware/qcom_scm-64.c | 9 +++++++++ + drivers/firmware/qcom_scm.c | 13 +++++++++++++ + drivers/firmware/qcom_scm.h | 8 ++++++++ + drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------ + include/linux/qcom_scm.h | 3 ++- + 6 files changed, 77 insertions(+), 7 deletions(-) + +--- a/drivers/firmware/qcom_scm-32.c ++++ b/drivers/firmware/qcom_scm-32.c +@@ -560,3 +560,21 @@ int __qcom_scm_pas_mss_reset(struct devi + + return ret ? : le32_to_cpu(out); + } ++ ++int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1) ++{ ++ s32 ret; ++ ++ ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1); ++ ++ return ret; ++} ++ ++int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2) ++{ ++ s32 ret; ++ ++ ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2); ++ ++ return ret; ++ } +--- a/drivers/firmware/qcom_scm-64.c ++++ b/drivers/firmware/qcom_scm-64.c +@@ -358,3 +358,12 @@ int __qcom_scm_pas_mss_reset(struct devi + + return ret ? : res.a1; + } ++int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1) ++{ ++ return -ENOTSUPP; ++} ++ ++int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2) ++{ ++ return -ENOTSUPP; ++} +--- a/drivers/firmware/qcom_scm.c ++++ b/drivers/firmware/qcom_scm.c +@@ -443,3 +443,16 @@ static int __init qcom_scm_init(void) + return platform_driver_register(&qcom_scm_driver); + } + subsys_initcall(qcom_scm_init); ++ ++int qcom_scm_pinmux_read(u32 arg1) ++{ ++ return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1); ++} ++EXPORT_SYMBOL(qcom_scm_pinmux_read); ++ ++int qcom_scm_pinmux_write(u32 arg1, u32 arg2) ++{ ++ return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE, ++ arg1, arg2); ++} ++EXPORT_SYMBOL(qcom_scm_pinmux_write); +--- a/drivers/firmware/qcom_scm.h ++++ b/drivers/firmware/qcom_scm.h +@@ -56,6 +56,13 @@ extern int __qcom_scm_pas_auth_and_rese + extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral); + extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset); + ++#define SCM_IO_READ 1 ++#define SCM_IO_WRITE 2 ++#define SCM_SVC_IO_ACCESS 0x5 ++ ++s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1); ++s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2); ++ + /* common error codes */ + #define QCOM_SCM_V2_EBUSY -12 + #define QCOM_SCM_ENOMEM -5 +--- a/drivers/pinctrl/qcom/pinctrl-msm.c ++++ b/drivers/pinctrl/qcom/pinctrl-msm.c +@@ -30,7 +30,8 @@ + #include + #include + #include +- ++#include ++#include + #include "../core.h" + #include "../pinconf.h" + #include "pinctrl-msm.h" +@@ -639,6 +640,9 @@ static int msm_gpio_irq_set_type(struct + const struct msm_pingroup *g; + unsigned long flags; + u32 val; ++ u32 addr; ++ int ret; ++ const __be32 *reg; + + g = &pctrl->soc->groups[d->hwirq]; + +@@ -652,11 +656,30 @@ static int msm_gpio_irq_set_type(struct + else + clear_bit(d->hwirq, pctrl->dual_edge_irqs); + ++ ret = of_device_is_compatible(pctrl->dev->of_node, ++ "qcom,ipq8064-pinctrl"); + /* Route interrupts to application cpu */ +- val = readl(pctrl->regs + g->intr_target_reg); +- val &= ~(7 << g->intr_target_bit); +- val |= g->intr_target_kpss_val << g->intr_target_bit; +- writel(val, pctrl->regs + g->intr_target_reg); ++ if (!ret) { ++ val = readl(pctrl->regs + g->intr_target_reg); ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ writel(val, pctrl->regs + g->intr_target_reg); ++ } else { ++ reg = of_get_property(pctrl->dev->of_node, "reg", NULL); ++ if (reg) { ++ addr = be32_to_cpup(reg) + g->intr_target_reg; ++ val = qcom_scm_pinmux_read(addr); ++ __iormb(); ++ ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ ++ __iowmb(); ++ ret = qcom_scm_pinmux_write(addr, val); ++ if (ret) ++ pr_err("\n Routing interrupts to Apps proc failed"); ++ } ++ } + + /* Update configuration for gpio. + * RAW_STATUS_EN is left on for all gpio irqs. Due to the +@@ -930,4 +953,3 @@ int msm_pinctrl_remove(struct platform_d + return 0; + } + EXPORT_SYMBOL(msm_pinctrl_remove); +- +--- a/include/linux/qcom_scm.h ++++ b/include/linux/qcom_scm.h +@@ -46,4 +46,6 @@ extern void qcom_scm_cpu_power_down(u32 + + extern u32 qcom_scm_get_version(void); + ++extern s32 qcom_scm_pinmux_read(u32 arg1); ++extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2); + #endif