From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Wed, 12 Aug 2020 12:40:00 +0000 (+0200)
Subject: ath79/mikrotik: add function for loading ath9k caldata
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ef765ceb0924134658876512132af5184c4dd947;p=openwrt%2Fstaging%2Fynezz.git

ath79/mikrotik: add function for loading ath9k caldata

The commands to read ath9k caldata on mikrotik subtarget are
mostly repetitive, so let's put them into a function to make
writing and reading them easier.

This function will only be required when patching the MAC address.
For cases where it is put correctly into the calibration data by
the vendor, caldata_sysfsload_from_file can be used directly as
done for ath10k at the moment.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---

diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 30a7759ef2..f2cb1f774f 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -4,6 +4,17 @@
 
 . /lib/functions/caldata.sh
 
+caldata_mikrotik_ath9k() {
+	local offset=$(($1))
+	local count=$(($2))
+	local macaddr=$3
+
+	caldata_from_file $wlan_data $offset $count /tmp/$FIRMWARE
+	ath9k_patch_mac "$macaddr" /tmp/$FIRMWARE
+	caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 $count
+	rm -f /tmp/$FIRMWARE
+}
+
 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)"
 
@@ -14,16 +25,10 @@ case "$FIRMWARE" in
 	case $board in
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2)
-		caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE
-		ath9k_patch_mac $(macaddr_add "$mac_base" +1) /tmp/$FIRMWARE
-		caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 0x440
-		rm -f /tmp/$FIRMWARE
+		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +1)
 		;;
 	mikrotik,routerboard-wap-g-5hact2hnd)
-		caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE
-		ath9k_patch_mac $(macaddr_add "$mac_base" +2) /tmp/$FIRMWARE
-		caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 0x440
-		rm -f /tmp/$FIRMWARE
+		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +2)
 		;;
 	*)
 		caldata_die "board $board is not supported yet"