From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Tue, 9 Jun 2020 10:01:43 +0000 (+0200)
Subject: ramips: fix port display for D-Link DIR-810L
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=efde716d14a9f5f5abe3bd8d5a2974651ec02d88;p=openwrt%2Fstaging%2Flinusw.git

ramips: fix port display for D-Link DIR-810L

The port order displayed in LuCI is currently inverted for this
devices:

LuCI - Device
LAN1 - LAN4
LAN2 - LAN3
LAN3 - LAN2
LAN4 - LAN1

Fix it.

Strangely, the owner of a TRENDnet TEW-810DR reports that the
initial port order is correct, while both devices share the
same board and look similar from the outside. Since I cannot
investigate this without having any of the devices, this does
only touch the DIR-810L for now.

While at it, also merge in the case for zbtlink,zbt-we2026, as
the display port specified for WAN there won't have any effect
anyway.

Reported-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---

diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 46ed857cdc..c70e4ff8e4 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -12,7 +12,6 @@ ramips_setup_interfaces()
 	aigale,ai-br100|\
 	alfa-network,ac1200rm|\
 	asus,rt-n12p|\
-	dlink,dir-810l|\
 	dlink,dwr-116-a1|\
 	dlink,dwr-921-c1|\
 	dlink,dwr-922-e2|\
@@ -109,6 +108,11 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "6@eth0"
 		;;
+	dlink,dir-810l|\
+	zbtlink,zbt-we2026)
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+		;;
 	dlink,dwr-118-a1)
 		ucidef_add_switch "switch0" \
 			"1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
@@ -214,10 +218,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "6t@eth0"
 		;;
-	zbtlink,zbt-we2026)
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
-		;;
 	zyxel,keenetic-viva)
 		ucidef_add_switch "switch1" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"