From: Stefan Kalscheuer Date: Sun, 18 Dec 2022 11:32:42 +0000 (+0100) Subject: ath79: convert UBNT Aircube AC WiFis to nvmem-cells X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f193f2d1a007f215b0c5619f14dc4ca6b579bfb6;p=openwrt%2Fstaging%2Fblocktrron.git ath79: convert UBNT Aircube AC WiFis to nvmem-cells Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Stefan Kalscheuer --- diff --git a/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts index e93c1b8dab..49cf39062a 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts +++ b/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts @@ -58,10 +58,26 @@ read-only; }; - art: partition@ff0000 { + partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + calibration_art_1000: calibration@1000 { + reg = <0x1000 0x440>; + }; + + calibration_art_5000: calibration@5000 { + reg = <0x5000 0x844>; + }; }; }; }; @@ -73,6 +89,13 @@ &pcie { status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0x0 0 0 0 0>; + nvmem-cells = <&calibration_art_5000>; + nvmem-cell-names = "calibration"; + }; }; &mdio0 { @@ -109,15 +132,6 @@ &wmac { status = "okay"; - mtd-cal-data = <&art 0x1000>; -}; - -&art { - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; + nvmem-cells = <&calibration_art_1000>; + nvmem-cell-names = "calibration"; }; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index d03e88041a..74e6738162 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -35,7 +35,6 @@ case "$FIRMWARE" in sophos,ap55c|\ sophos,ap100|\ sophos,ap100c|\ - ubnt,aircube-ac|\ ubnt,bullet-ac|\ ubnt,unifiac-lite|\ ubnt,unifiac-lr|\