From: Sergio Paracuellos Date: Wed, 5 May 2021 13:21:53 +0000 (+0200) Subject: ramips: mt7621-dts: remove ethsys node X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f1d154ec6c9a64744be0cdfcbb66d9ed1d9033e3;p=openwrt%2Fstaging%2Flinusw.git ramips: mt7621-dts: remove ethsys node DT 'ethsys' node is being configured as a syscon to get access to reset and other registers in the 'mediateķ,mt7621-eth' driver. Since the 'sysc' is also a syscon, provides the clock and also is virtually mapped from the same physical address 0x1e000000 we can just use 'sysc' as the phandle for the syscon in the ethernet node. Compatible string 'mediatek,mt7621-ethsys' of the node is not being used anywhere inside the kernel so, this node can be safely removed. Signed-off-by: Sergio Paracuellos Link: https://lore.kernel.org/r/20210505132154.8263-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index 779d8c4da0..4cb339bcae 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -438,13 +438,6 @@ clock-names = "nfi_clk"; }; - ethsys: syscon@1e000000 { - compatible = "mediatek,mt7621-ethsys", - "syscon"; - reg = <0x1e000000 0x1000>; - #clock-cells = <1>; - }; - ethernet: ethernet@1e100000 { compatible = "mediatek,mt7621-eth"; reg = <0x1e100000 0x10000>; @@ -461,7 +454,7 @@ interrupt-parent = <&gic>; interrupts = ; - mediatek,ethsys = <ðsys>; + mediatek,ethsys = <&sysc>; gmac0: mac@0 { compatible = "mediatek,eth-mac";