From: David S. Miller Date: Mon, 10 Aug 2015 05:48:10 +0000 (-0700) Subject: Merge branch 'mv88e6xxx-switchdev-fdb' X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f1d5ca434413b20cd3f8c18ff2b634b7782149a5;p=openwrt%2Fstaging%2Fblogic.git Merge branch 'mv88e6xxx-switchdev-fdb' Vivien Didelot says: ==================== net: dsa: mv88e6xxx: support switchdev FDB objects This patchset refactors the DSA and mv88e6xxx code to use the switchdev FDB objects. The first two patches add minor but necessary changes to switchdev, the third one implements the switchdev glue in DSA for FDB routines, and the remaining ones refactor the FDB access functions in the mv88e6xxx code. Below is an usage example (ports 0-2 belongs to br0, ports 3-4 belongs to br1): # bridge fdb add 3c:97:0e:11:30:6e dev swp2 # bridge fdb add 3c:97:0e:11:40:78 dev swp3 # bridge fdb add 3c:97:0e:11:50:86 dev swp4 # bridge fdb del 3c:97:0e:11:40:78 dev swp3 # bridge fdb 01:00:5e:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth1 self permanent 00:50:d2:10:78:15 dev swp0 master br0 permanent 3c:97:0e:11:30:6e dev swp2 self static 00:50:d2:10:78:15 dev swp3 master br1 permanent 3c:97:0e:11:50:86 dev swp4 self static # cat /sys/kernel/debug/dsa0/atu # DB T/P Vec State Addr # 001 Port 004 e 3c:97:0e:11:30:6e # 004 Port 010 e 3c:97:0e:11:50:86 For the 88E6xxx switches, FIDs 1 to num_ports will be reserved for non-bridged ports and bridge groups, and the remaining will be later used by VLANs. This change is necessary to welcome the support for hardware VLANs (which will follow soon). Changes in v2: - remove ndo_bridge_{get,set,del}link from switchdev/DSA glue code - use ether_addr_copy instead of memcpy for MAC addresses - constify MAC address in port_fdb_{add,del} - split the mv88e6xxx code refactoring into several patches ==================== Signed-off-by: David S. Miller --- f1d5ca434413b20cd3f8c18ff2b634b7782149a5