From: Nir Dotan Date: Thu, 4 Oct 2018 15:48:02 +0000 (+0000) Subject: mlxsw: pci: Derive event type from event queue number X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f3c84a8e3e922afdcbc55f04df8fdf8a548f5a21;p=openwrt%2Fstaging%2Fblogic.git mlxsw: pci: Derive event type from event queue number Due to a hardware issue in Spectrum-2, the field event_type of the event queue element (EQE) has become reserved. It was used to distinguish between command interface completion events and completion events. Use queue number to determine event type, as command interface completion events are always received on EQ0 and mlxsw driver maps completion events to EQ1. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Nir Dotan Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index 4d271fb3de3d..5890fdfd62c3 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -718,14 +718,17 @@ static void mlxsw_pci_eq_tasklet(unsigned long data) memset(&active_cqns, 0, sizeof(active_cqns)); while ((eqe = mlxsw_pci_eq_sw_eqe_get(q))) { - u8 event_type = mlxsw_pci_eqe_event_type_get(eqe); - switch (event_type) { - case MLXSW_PCI_EQE_EVENT_TYPE_CMD: + /* Command interface completion events are always received on + * queue MLXSW_PCI_EQ_ASYNC_NUM (EQ0) and completion events + * are mapped to queue MLXSW_PCI_EQ_COMP_NUM (EQ1). + */ + switch (q->num) { + case MLXSW_PCI_EQ_ASYNC_NUM: mlxsw_pci_eq_cmd_event(mlxsw_pci, eqe); q->u.eq.ev_cmd_count++; break; - case MLXSW_PCI_EQE_EVENT_TYPE_COMP: + case MLXSW_PCI_EQ_COMP_NUM: cqn = mlxsw_pci_eqe_cqn_get(eqe); set_bit(cqn, active_cqns); cq_handle = true;