From: Sander Vanheule Date: Fri, 26 Nov 2021 21:10:24 +0000 (+0100) Subject: realtek: add missing gpio0 pinctrl properties X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f4065485d3d9c6efa06c323fd5f61099a390c4c3;p=openwrt%2Fstaging%2Fsvanheule.git realtek: add missing gpio0 pinctrl properties Not all devices using the gpio0/sys-led pin as a GPIO, configure the pinmux. Add the necessary pinctrl properties to these devices to ensure the pin is set up for use as GPIO. Co-developed-by: INAGAKI Hiroshi Signed-off-by: INAGAKI Hiroshi Signed-off-by: Sander Vanheule Tested-by: Bjørn Mork --- diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi index 078f8ff228..5e587f278d 100644 --- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi @@ -14,6 +14,9 @@ }; keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-keys"; mode { diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210.dtsi b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210.dtsi index aaaa872162..09f5555307 100644 --- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210.dtsi +++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210.dtsi @@ -19,6 +19,9 @@ }; leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-leds"; led_power: power { diff --git a/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts b/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts index 30960afff4..4808141494 100644 --- a/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts +++ b/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts @@ -15,6 +15,9 @@ }; keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-keys"; reset {