From: Tolga Cakir <tolga@cevel.net>
Date: Tue, 24 Oct 2017 20:03:33 +0000 (+0200)
Subject: ipq806x: fix Zyxel NBG6817 WiFi button
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f4d4a3c0ef5839e3a8e15027870520fe0b48312c;p=openwrt%2Fstaging%2Fzorun.git

ipq806x: fix Zyxel NBG6817 WiFi button

Zyxel NBG6817 features a WiFi button, which becomes functional by setting
correct GPIO. It is a switch-type button, so it emits KEY_RFKILL on each ON
and OFF state. This is achieved by setting input-type to EV_SW.

Signed-off-by: Tolga Cakir <tolga@cevel.net>
---

diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
index 5fe14da268..930f2ad075 100644
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -41,7 +41,7 @@
 		pinmux@800000 {
 			button_pins: button_pins {
 				mux {
-					pins = "gpio6", "gpio54", "gpio65";
+					pins = "gpio53", "gpio54", "gpio65";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-up;
@@ -334,8 +334,9 @@
 
 		wifi {
 			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RFKILL>;
+			linux,input-type = <EV_SW>;
 		};
 
 		reset {