From: Stefan Lippers-Hollmann Date: Thu, 6 May 2021 23:00:58 +0000 (+0200) Subject: ipq806x: g10: case-insensitive qcom-smem partitions X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f70e11cd974e;p=openwrt%2Fstaging%2Fblocktrron.git ipq806x: g10: case-insensitive qcom-smem partitions The out-of-tree qcom-smem patches traditionally displayed mtd partition names in upper case, starting with the new mainline qcom-smem support in kernel v5.10, it switches to normalizing the partition names to lower case. Signed-off-by: Stefan Lippers-Hollmann --- diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a05bd99bc7..3dd7a51d5d 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -10,7 +10,12 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in asrock,g10) - caldata_extract "0:ART" 0x1000 0x2f20 + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x1000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x1000 0x2f20 + fi ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x1000 0x2f20 @@ -59,7 +64,12 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in asrock,g10) - caldata_extract "0:ART" 0x5000 0x2f20 + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x5000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x5000 0x2f20 + fi ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x5000 0x2f20 diff --git a/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh b/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh index 9e1376a578..8be737d2da 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh @@ -1,7 +1,9 @@ . /lib/functions.sh asrock_bootconfig_mangle() { - local mtdnum="$( find_mtd_index 0:BOOTCONFIG )" + local mtdnum="$(find_mtd_index 0:bootconfig)" + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + [ -n "$mtdnum" ] || mtdnum="$(find_mtd_index 0:BOOTCONFIG)" if [ -z "$mtdnum" ]; then echo "cannot find bootconfig mtd partition"