From: John Crispin Date: Thu, 4 Jun 2020 12:26:11 +0000 (+0200) Subject: mediatek: add bpi-r64 emmc support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f72a2b004c3541b1834fe7af2ae69dcfcde8d338;p=openwrt%2Fstaging%2Fjow.git mediatek: add bpi-r64 emmc support Signed-off-by: John Crispin --- diff --git a/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64-rootdisk.dts b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64-rootdisk.dts new file mode 100644 index 0000000000..9d80366a18 --- /dev/null +++ b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64-rootdisk.dts @@ -0,0 +1,582 @@ +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ryder Lee + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; +#include +#include + +#include "mt7622.dtsi" +#include "mt6380.dtsi" + +/ { + model = "Bananapi BPI-R64"; + compatible = "bananapi,bpi-r64-rootdisk", "mediatek,mt7622"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512 root=/dev/mmcblk0p7 rootfstype=squashfs,f2fs"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + + cpu@1 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + factory { + label = "factory"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + }; + }; + + gsw: gsw@0 { + compatible = "mediatek,mt753x"; + mediatek,ethsys = <ðsys>; + #address-cells = <1>; + #size-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + green { + label = "bpi-r64:pio:green"; + gpios = <&pio 89 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red { + label = "bpi-r64:pio:red"; + gpios = <&pio 88 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&gsw { + mediatek,mdio = <&mdio>; + mediatek,portmap = "wllll"; + mediatek,mdio_master_pinmux = <0>; + reset-gpios = <&pio 54 0>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + + port5: port@5 { + compatible = "mediatek,mt753x-port"; + reg = <5>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port6: port@6 { + compatible = "mediatek,mt753x-port"; + reg = <6>; + phy-mode = "sgmii"; + fixed-link { + speed = <2500>; + full-duplex; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pio { + /* Attention: GPIO 90 is used to switch between PCIe@1,0 and + * SATA functions. i.e. output-high: PCIe, output-low: SATA + */ + asm_sel { + gpio-hog; + gpios = <90 GPIO_ACTIVE_HIGH>; + output-high; + }; + + /* eMMC is shared pin with parallel NAND */ + emmc_pins_default: emmc-pins-default { + mux { + function = "emmc", "emmc_rst"; + groups = "emmc"; + }; + + /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", + * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, + * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively + */ + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + bias-pull-down; + }; + }; + + emmc_pins_uhs: emmc-pins-uhs { + mux { + function = "emmc"; + groups = "emmc"; + }; + + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + drive-strength = <4>; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + drive-strength = <4>; + bias-pull-down; + }; + }; + + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio", "rgmii_via_gmac2"; + }; + }; + + i2c1_pins: i2c1-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_pins: i2c2-pins { + mux { + function = "i2c"; + groups = "i2c2_0"; + }; + }; + + i2s1_pins: i2s1-pins { + mux { + function = "i2s"; + groups = "i2s_out_mclk_bclk_ws", + "i2s1_in_data", + "i2s1_out_data"; + }; + + conf { + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", + "I2S_WS", "I2S_MCLK"; + drive-strength = <12>; + bias-pull-down; + }; + }; + + irrx_pins: irrx-pins { + mux { + function = "ir"; + groups = "ir_1_rx"; + }; + }; + + irtx_pins: irtx-pins { + mux { + function = "ir"; + groups = "ir_1_tx"; + }; + }; + + /* Parallel nand is shared pin with eMMC */ + parallel_nand_pins: parallel-nand-pins { + mux { + function = "flash"; + groups = "par_nand"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie0_pad_perst", + "pcie0_1_waken", + "pcie0_1_clkreq"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie1_pad_perst", + "pcie1_0_waken", + "pcie1_0_clkreq"; + }; + }; + + pmic_bus_pins: pmic-bus-pins { + mux { + function = "pmic"; + groups = "pmic_bus"; + }; + }; + + pwm7_pins: pwm1-2-pins { + mux { + function = "pwm"; + groups = "pwm_ch7_2"; + }; + }; + + wled_pins: wled-pins { + mux { + function = "led"; + groups = "wled"; + }; + }; + + sd0_pins_default: sd0-pins-default { + mux { + function = "sd"; + groups = "sd_0"; + }; + + /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", + * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, + * DAT2, DAT3, CMD, CLK for SD respectively. + */ + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + drive-strength = <8>; + bias-pull-up; + }; + conf-clk { + pins = "I2S3_OUT"; + drive-strength = <12>; + bias-pull-down; + }; + conf-cd { + pins = "TXD3"; + bias-pull-up; + }; + }; + + sd0_pins_uhs: sd0-pins-uhs { + mux { + function = "sd"; + groups = "sd_0"; + }; + + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "I2S3_OUT"; + bias-pull-down; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + spic0_pins: spic0-pins { + mux { + function = "spi"; + groups = "spic0_0"; + }; + }; + + spic1_pins: spic1-pins { + mux { + function = "spi"; + groups = "spic1_0"; + }; + }; + + /* SPI-NOR is shared pin with serial NAND */ + spi_nor_pins: spi-nor-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + /* serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_0_tx_rx" ; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_1_tx_rx" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pins>; + status = "okay"; +}; + +&pwrap { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_bus_pins>; + + status = "okay"; +}; + +&sata { + status = "disable"; +}; + +&sata_phy { + status = "disable"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spic0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spic1_pins>; + status = "okay"; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; + status = "okay"; +}; diff --git a/target/linux/mediatek/image/mt7622.mk b/target/linux/mediatek/image/mt7622.mk index bb7d89a826..d9ddb0755e 100644 --- a/target/linux/mediatek/image/mt7622.mk +++ b/target/linux/mediatek/image/mt7622.mk @@ -10,7 +10,19 @@ define Device/bpi_bananapi-r64 endef TARGET_DEVICES += bpi_bananapi-r64 -define Device/elecom_wrc-2533gent +define Device/bpi_bananapi-r64-rootdisk + DEVICE_VENDOR := Bpi + DEVICE_MODEL := Banana Pi R64 (rootdisk) + DEVICE_DTS := mt7622-bananapi-bpi-r64-rootdisk + DEVICE_DTS_DIR := $(DTS_DIR)/mediatek + SUPPORTED_DEVICES := bananapi,bpi-r64 + DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk + IMAGES := sysupgrade-emmc.bin.gz + IMAGE/sysupgrade-emmc.bin.gz := sysupgrade-emmc | gzip | append-metadata +endef +TARGET_DEVICES += bpi_bananapi-r64-rootdisk + +define Device/elecom-wrc-2533gent DEVICE_VENDOR := Elecom DEVICE_MODEL := WRC-2533GENT DEVICE_DTS := mt7622-elecom-wrc-2533gent diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network index 18ad24d046..b87a24fc2a 100755 --- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network @@ -9,7 +9,7 @@ mediatek_setup_interfaces() local board="$1" case $board in - 'elecom,wrc-2533gent') + *) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6u@eth0" "5u@eth1" ;; diff --git a/target/linux/mediatek/mt7622/base-files/lib/preinit/79_move_config b/target/linux/mediatek/mt7622/base-files/lib/preinit/79_move_config new file mode 100644 index 0000000000..865a5fb90c --- /dev/null +++ b/target/linux/mediatek/mt7622/base-files/lib/preinit/79_move_config @@ -0,0 +1,20 @@ +#!/bin/sh + +. /lib/upgrade/common.sh + +RECOVERY_PART=/dev/mmcblk0p6 + +move_config() { + if [ -b $RECOVERY_PART ]; then + insmod nls_cp437 + insmod nls_iso8859-1 + insmod fat + insmod vfat + mkdir -p /recovery + mount -o rw,noatime $RECOVERY_PART /recovery + [ -f "/recovery/$BACKUP_FILE" ] && mv -f "/recovery/$BACKUP_FILE" / + umount /recovery + fi +} + +boot_hook_add preinit_mount_root move_config diff --git a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh index 42903f75a2..24b71ece63 100755 --- a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh @@ -2,6 +2,11 @@ platform_do_upgrade() { local board=$(board_name) case "$board" in + bananapi,bpi-r64-rootdisk) + #2097152=0x200000 is the offset in bytes from the start + #of eMMC and to the location of the kernel + get_image "$1" | dd of=/dev/mmcblk0 bs=2097152 seek=1 conv=fsync + ;; *) default_do_upgrade "$1" ;; @@ -17,19 +22,30 @@ platform_check_image() { [ "$#" -gt 1 ] && return 1 case "$board" in - elecom,wrc-2533gent) + *) [ "$magic" != "d00dfeed" ] && { echo "Invalid image type." return 1 } return 0 ;; - - *) - echo "Sysupgrade is not supported on your board yet." - return 1 - ;; esac return 0 } + +platform_copy_config_emmc() { + mkdir -p /recovery + mount -o rw,noatime /dev/mmcblk0p6 /recovery + cp -af "$UPGRADE_BACKUP" "/recovery/$BACKUP_FILE" + sync + umount /recovery +} + +platform_copy_config() { + case "$(board_name)" in + bananapi,bpi-r64-rootdisk) + platform_copy_config_emmc + ;; + esac +}