From: Adrian Schmutzler Date: Tue, 7 Apr 2020 08:34:33 +0000 (+0200) Subject: ramips: mt7621: harmonize naming scheme for Mikrotik X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f761f4052c411bababed2d2e9d8dc3f43380e4ee;p=openwrt%2Fstaging%2Fwigyori.git ramips: mt7621: harmonize naming scheme for Mikrotik So far, image/device/board names for Mikrotik devices in mt7621 have been used quite inconsistently. This patch harmonizes the naming scheme by applying the same style as used lately in ath79, i.e. using "RouterBOARD" as separate word in the model name (instead of RB prefix for the number) and deriving the board/device name from that (= make lower case and replace spaces by hyphens). This style has already been used for most the model/DEVICE_MODEL variables in mt7621, so this is essentially just adjusting the remaining variables to that. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/mt7621_mikrotik_rb750gr3.dts b/target/linux/ramips/dts/mt7621_mikrotik_rb750gr3.dts deleted file mode 100644 index e268b233d4..0000000000 --- a/target/linux/ramips/dts/mt7621_mikrotik_rb750gr3.dts +++ /dev/null @@ -1,178 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7621.dtsi" - -#include -#include - -/ { - compatible = "mikrotik,rb750gr3", "mediatek,mt7621-soc"; - model = "MikroTik RouterBOARD 750Gr3"; - - aliases { - led-boot = &led_usr; - led-failsafe = &led_usr; - led-running = &led_usr; - led-upgrade = &led_usr; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - pwr { - label = "rb750gr3:blue:pwr"; - gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_usr: usr { - label = "rb750gr3:green:usr"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - mode { - label = "mode"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - beeper { - compatible = "gpio-beeper"; - gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb_power { - gpio-export,name = "usb_power"; - gpio-export,output = <1>; - gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "RouterBoot"; - reg = <0x0 0x40000>; - read-only; - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bootloader1"; - reg = <0x0 0xf000>; - read-only; - }; - - hard_config: partition@f000 { - label = "hard_config"; - reg = <0xf000 0x1000>; - read-only; - }; - - partition@10000 { - label = "bootloader2"; - reg = <0x10000 0xf000>; - read-only; - }; - - partition@20000 { - label = "soft_config"; - reg = <0x20000 0x1000>; - }; - - partition@30000 { - label = "bios"; - reg = <0x30000 0x1000>; - read-only; - }; - }; - - partition@40000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x040000 0xfc0000>; - }; - }; - }; -}; - -&gmac0 { - mtd-mac-address = <&hard_config 0x0010>; - mtd-mac-address-increment = <1>; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "wan"; - mtd-mac-address = <&hard_config 0x0010>; - mtd-mac-address-increment = <2>; - }; - - port@1 { - status = "okay"; - label = "lan2"; - }; - - port@2 { - status = "okay"; - label = "lan3"; - }; - - port@3 { - status = "okay"; - label = "lan4"; - }; - - port@4 { - status = "okay"; - label = "lan5"; - }; - }; -}; - -&state_default { - gpio { - /* via gpio7 (uart3 group) the PoE status can be read */ - groups = "uart2", "uart3", "jtag", "wdt"; - function = "gpio"; - }; -}; - -&sdhci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_rbm11g.dts b/target/linux/ramips/dts/mt7621_mikrotik_rbm11g.dts deleted file mode 100644 index aae899c9a6..0000000000 --- a/target/linux/ramips/dts/mt7621_mikrotik_rbm11g.dts +++ /dev/null @@ -1,168 +0,0 @@ -/dts-v1/; - -#include "mt7621.dtsi" - -#include -#include - -/ { - compatible = "mikrotik,rbm11g", "mediatek,mt7621-soc"; - model = "MikroTik RouterBOARD M11G"; - - aliases { - led-boot = &led_usr; - led-failsafe = &led_usr; - led-running = &led_usr; - led-upgrade = &led_usr; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_usr: usr { - label = "rbm11g:green:usr"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - - rssi0 { - label = "rbm11g:green:rssi0"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - }; - - rssi1 { - label = "rbm11g:green:rssi1"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - }; - - rssi2 { - label = "rbm11g:green:rssi2"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - - rssi3 { - label = "rbm11g:green:rssi3"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - }; - - rssi4 { - label = "rbm11g:green:rssi4"; - gpios = <&gpio 26 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - res { - label = "reset"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - pcie0_vcc_reg { - compatible = "regulator-fixed"; - regulator-name = "pcie0_vcc"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; -}; - -&spi0 { - status = "okay"; - - w25q128@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - // XXX empiric value to obtain actual 10MHz SCK at the chip - spi-max-frequency = <3125000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "RouterBoot"; - reg = <0x0 0x40000>; - read-only; - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bootloader1"; - reg = <0x0 0xf000>; - read-only; - }; - - hard_config: partition@f000 { - label = "hard_config"; - reg = <0xf000 0x1000>; - read-only; - }; - - partition@10000 { - label = "bootloader2"; - reg = <0x10000 0xf000>; - read-only; - }; - - partition@20000 { - label = "soft_config"; - reg = <0x20000 0x1000>; - }; - - partition@30000 { - label = "bios"; - reg = <0x30000 0x1000>; - read-only; - }; - }; - - partition@40000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x040000 0xFC0000>; - }; - }; - }; -}; - -&gmac0 { - mtd-mac-address = <&hard_config 0x0010>; - mtd-mac-address-increment = <1>; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "lan"; - }; - }; -}; - -&state_default { - gpio { - groups = "uart2", "wdt", "rgmii2"; - function = "gpio"; - }; -}; - -&i2c { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_rbm33g.dts b/target/linux/ramips/dts/mt7621_mikrotik_rbm33g.dts deleted file mode 100644 index f7889bd68a..0000000000 --- a/target/linux/ramips/dts/mt7621_mikrotik_rbm33g.dts +++ /dev/null @@ -1,208 +0,0 @@ -/dts-v1/; - -#include "mt7621.dtsi" - -#include -#include - -/ { - compatible = "mikrotik,rbm33g", "mediatek,mt7621-soc"; - model = "MikroTik RouterBOARD M33G"; - - aliases { - led-boot = &led_usr; - led-failsafe = &led_usr; - led-running = &led_usr; - led-upgrade = &led_usr; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_usr: usr { - label = "rbm33g:green:usr"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - res { - label = "res"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - pcie0_vcc_reg { - compatible = "regulator-fixed"; - regulator-name = "pcie0_vcc"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; - - pcie1_vcc_reg { - compatible = "regulator-fixed"; - regulator-name = "pcie1_vcc"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio 10 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; - - pcie2_vcc_reg { - compatible = "regulator-fixed"; - regulator-name = "pcie2_vcc"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; - - usb_vcc_reg { - compatible = "regulator-fixed"; - regulator-name = "usb_vcc"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; -}; - -&spi0 { - status = "okay"; - - w25q40@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <3125000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "RouterBoot"; - reg = <0x0 0x40000>; - read-only; - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bootloader1"; - reg = <0x0 0xf000>; - read-only; - }; - - hard_config: partition@f000 { - label = "hard_config"; - reg = <0xf000 0x1000>; - read-only; - }; - - partition@10000 { - label = "bootloader2"; - reg = <0x10000 0xf000>; - read-only; - }; - - partition@20000 { - label = "soft_config"; - reg = <0x20000 0x1000>; - }; - - partition@30000 { - label = "bios"; - reg = <0x30000 0x1000>; - read-only; - }; - }; - }; - }; - - w25q128@1 { - compatible = "jedec,spi-nor"; - reg = <1>; - // XXX empiric value to obtain actual 10MHz SCK at the chip - spi-max-frequency = <3125000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - // Region <0x0 0x40000> seems reserved by OEM - - partition@40000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x040000 0xFC0000>; - }; - }; - }; -}; - -&gmac0 { - mtd-mac-address = <&hard_config 0x0010>; - mtd-mac-address-increment = <1>; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "wan"; - mtd-mac-address = <&hard_config 0x0010>; - mtd-mac-address-increment = <2>; - }; - - port@1 { - status = "okay"; - label = "lan1"; - }; - - port@2 { - status = "okay"; - label = "lan2"; - }; - }; -}; - -&state_default { - gpio { - groups = "uart2", "wdt"; - function = "gpio"; - }; -}; - -&sdhci { - status = "okay"; -}; - -&i2c { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts new file mode 100644 index 0000000000..3f37155f24 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "mikrotik,routerboard-750gr3", "mediatek,mt7621-soc"; + model = "MikroTik RouterBOARD 750Gr3"; + + aliases { + led-boot = &led_usr; + led-failsafe = &led_usr; + led-running = &led_usr; + led-upgrade = &led_usr; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "routerboard-750gr3:blue:pwr"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_usr: usr { + label = "routerboard-750gr3:green:usr"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + mode { + label = "mode"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + beeper { + compatible = "gpio-beeper"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb_power { + gpio-export,name = "usb_power"; + gpio-export,output = <1>; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x40000>; + read-only; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader1"; + reg = <0x0 0xf000>; + read-only; + }; + + hard_config: partition@f000 { + label = "hard_config"; + reg = <0xf000 0x1000>; + read-only; + }; + + partition@10000 { + label = "bootloader2"; + reg = <0x10000 0xf000>; + read-only; + }; + + partition@20000 { + label = "soft_config"; + reg = <0x20000 0x1000>; + }; + + partition@30000 { + label = "bios"; + reg = <0x30000 0x1000>; + read-only; + }; + }; + + partition@40000 { + compatible = "mikrotik,minor"; + label = "firmware"; + reg = <0x040000 0xfc0000>; + }; + }; + }; +}; + +&gmac0 { + mtd-mac-address = <&hard_config 0x0010>; + mtd-mac-address-increment = <1>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + mtd-mac-address = <&hard_config 0x0010>; + mtd-mac-address-increment = <2>; + }; + + port@1 { + status = "okay"; + label = "lan2"; + }; + + port@2 { + status = "okay"; + label = "lan3"; + }; + + port@3 { + status = "okay"; + label = "lan4"; + }; + + port@4 { + status = "okay"; + label = "lan5"; + }; + }; +}; + +&state_default { + gpio { + /* via gpio7 (uart3 group) the PoE status can be read */ + groups = "uart2", "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; + +&sdhci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts new file mode 100644 index 0000000000..bd58aea951 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts @@ -0,0 +1,168 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "mikrotik,routerboard-m11g", "mediatek,mt7621-soc"; + model = "MikroTik RouterBOARD M11G"; + + aliases { + led-boot = &led_usr; + led-failsafe = &led_usr; + led-running = &led_usr; + led-upgrade = &led_usr; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_usr: usr { + label = "routerboard-m11g:green:usr"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + + rssi0 { + label = "routerboard-m11g:green:rssi0"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + rssi1 { + label = "routerboard-m11g:green:rssi1"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + + rssi2 { + label = "routerboard-m11g:green:rssi2"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + + rssi3 { + label = "routerboard-m11g:green:rssi3"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + rssi4 { + label = "routerboard-m11g:green:rssi4"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + res { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + pcie0_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "pcie0_vcc"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; +}; + +&spi0 { + status = "okay"; + + w25q128@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + // XXX empiric value to obtain actual 10MHz SCK at the chip + spi-max-frequency = <3125000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x40000>; + read-only; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader1"; + reg = <0x0 0xf000>; + read-only; + }; + + hard_config: partition@f000 { + label = "hard_config"; + reg = <0xf000 0x1000>; + read-only; + }; + + partition@10000 { + label = "bootloader2"; + reg = <0x10000 0xf000>; + read-only; + }; + + partition@20000 { + label = "soft_config"; + reg = <0x20000 0x1000>; + }; + + partition@30000 { + label = "bios"; + reg = <0x30000 0x1000>; + read-only; + }; + }; + + partition@40000 { + compatible = "mikrotik,minor"; + label = "firmware"; + reg = <0x040000 0xFC0000>; + }; + }; + }; +}; + +&gmac0 { + mtd-mac-address = <&hard_config 0x0010>; + mtd-mac-address-increment = <1>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&state_default { + gpio { + groups = "uart2", "wdt", "rgmii2"; + function = "gpio"; + }; +}; + +&i2c { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts new file mode 100644 index 0000000000..19e1a71e99 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts @@ -0,0 +1,208 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "mikrotik,routerboard-m33g", "mediatek,mt7621-soc"; + model = "MikroTik RouterBOARD M33G"; + + aliases { + led-boot = &led_usr; + led-failsafe = &led_usr; + led-running = &led_usr; + led-upgrade = &led_usr; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_usr: usr { + label = "routerboard-m33g:green:usr"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + res { + label = "res"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + pcie0_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "pcie0_vcc"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + pcie1_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "pcie1_vcc"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + pcie2_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "pcie2_vcc"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + usb_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "usb_vcc"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&spi0 { + status = "okay"; + + w25q40@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <3125000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x40000>; + read-only; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader1"; + reg = <0x0 0xf000>; + read-only; + }; + + hard_config: partition@f000 { + label = "hard_config"; + reg = <0xf000 0x1000>; + read-only; + }; + + partition@10000 { + label = "bootloader2"; + reg = <0x10000 0xf000>; + read-only; + }; + + partition@20000 { + label = "soft_config"; + reg = <0x20000 0x1000>; + }; + + partition@30000 { + label = "bios"; + reg = <0x30000 0x1000>; + read-only; + }; + }; + }; + }; + + w25q128@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + // XXX empiric value to obtain actual 10MHz SCK at the chip + spi-max-frequency = <3125000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + // Region <0x0 0x40000> seems reserved by OEM + + partition@40000 { + compatible = "mikrotik,minor"; + label = "firmware"; + reg = <0x040000 0xFC0000>; + }; + }; + }; +}; + +&gmac0 { + mtd-mac-address = <&hard_config 0x0010>; + mtd-mac-address-increment = <1>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + mtd-mac-address = <&hard_config 0x0010>; + mtd-mac-address-increment = <2>; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@2 { + status = "okay"; + label = "lan2"; + }; + }; +}; + +&state_default { + gpio { + groups = "uart2", "wdt"; + function = "gpio"; + }; +}; + +&sdhci { + status = "okay"; +}; + +&i2c { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 0ecd70685b..ec9d8aacae 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -495,25 +495,27 @@ define Device/MikroTik check-size endef -define Device/mikrotik_rb750gr3 +define Device/mikrotik_routerboard-750gr3 $(Device/MikroTik) - DEVICE_MODEL := RouterBOARD RB750G - DEVICE_VARIANT := r3 + DEVICE_MODEL := RouterBOARD 750Gr3 DEVICE_PACKAGES += kmod-gpio-beeper + SUPPORTED_DEVICES += mikrotik,rb750gr3 endef -TARGET_DEVICES += mikrotik_rb750gr3 +TARGET_DEVICES += mikrotik_routerboard-750gr3 -define Device/mikrotik_rbm11g +define Device/mikrotik_routerboard-m11g $(Device/MikroTik) DEVICE_MODEL := RouterBOARD M11G + SUPPORTED_DEVICES += mikrotik,rbm11g endef -TARGET_DEVICES += mikrotik_rbm11g +TARGET_DEVICES += mikrotik_routerboard-m11g -define Device/mikrotik_rbm33g +define Device/mikrotik_routerboard-m33g $(Device/MikroTik) DEVICE_MODEL := RouterBOARD M33G + SUPPORTED_DEVICES += mikrotik,rbm33g endef -TARGET_DEVICES += mikrotik_rbm33g +TARGET_DEVICES += mikrotik_routerboard-m33g define Device/mqmaker_witi IMAGE_SIZE := 16064k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 66739a7536..cc114da4ee 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -34,7 +34,7 @@ gnubee,gb-pc2) ucidef_set_led_netdev "lan1" "lan1" "$boardname:green:lan1" "lan1" ucidef_set_led_netdev "lan2" "lan2" "$boardname:green:lan2" "lan2" ;; -mikrotik,rbm11g) +mikrotik,routerboard-m11g) ucidef_set_rssimon "wlan0" "200000" "1" ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100" ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100" diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index f654574e14..f573a049ce 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -14,7 +14,7 @@ ramips_setup_interfaces() ;; asiarf,ap7621-nv1|\ lenovo,newifi-d1|\ - mikrotik,rbm33g|\ + mikrotik,routerboard-m33g|\ xiaomi,mir3g|\ xiaomi,mir3g-v2) ucidef_set_interfaces_lan_wan "lan1 lan2" "wan" @@ -31,7 +31,7 @@ ramips_setup_interfaces() linksys,re6500) ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; - mikrotik,rbm11g|\ + mikrotik,routerboard-m11g|\ netgear,ex6150|\ thunder,timecloud|\ tplink,re350-v1|\ @@ -39,7 +39,7 @@ ramips_setup_interfaces() ubnt,unifi-nanohd) ucidef_set_interface_lan "lan" ;; - mikrotik,rb750gr3) + mikrotik,routerboard-750gr3) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan" ;; ubiquiti,edgerouterx|\ @@ -89,9 +89,9 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) label_mac=$wan_mac ;; - mikrotik,rb750gr3|\ - mikrotik,rbm11g|\ - mikrotik,rbm33g) + mikrotik,routerboard-750gr3|\ + mikrotik,routerboard-m11g|\ + mikrotik,routerboard-m33g) label_mac=$(mtd_get_mac_binary hard_config 0x10) ;; zbtlink,zbt-we1326|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches index d3bc85f827..511d9deed8 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -7,7 +7,7 @@ board_config_update board=$(board_name) case "$board" in -mikrotik,rb750gr3) +mikrotik,routerboard-750gr3) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17" ;; telco-electronics,x1) diff --git a/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration b/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration index e745c2c5d4..73140fd7d5 100644 --- a/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration @@ -4,11 +4,19 @@ . /lib/functions/migrations.sh board=$(board_name) +boardonly="${board##*,}" case "$board" in +mikrotik,routerboard-750gr3) + migrate_leds "^rb750gr3:=$boardonly:" +mikrotik,routerboard-m11g) + migrate_leds "^rbm11g:=$boardonly:" +mikrotik,routerboard-m33g) + migrate_leds "^rbm33g:=$boardonly:" netgear,wndr3700-v5) - migrate_leds "^wndr3700v5:=wndr3700-v5:" + migrate_leds "^wndr3700v5:=$boardonly:" ;; + esac migrations_apply system diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index ad10dcbdaa..afb3a52a82 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -27,9 +27,9 @@ platform_do_upgrade() { fi } ;; - mikrotik,rb750gr3|\ - mikrotik,rbm11g|\ - mikrotik,rbm33g) + mikrotik,routerboard-750gr3|\ + mikrotik,routerboard-m11g|\ + mikrotik,routerboard-m33g) [ -z "$(rootfs_type)" ] && mtd erase firmware ;; asus,rt-ac65p|\